|
| 1 | TOTAL AMOUNT |
| 2 | MANUFACTURING, SUPPLY & DELIVERY OF PUMP - SHAFTMADE OFF SS-316 FOR 647 CUM/HR., 15 MTRS HEAD SLUDGEPUMP WITH NECESSARY KEYS ETC, AS PER SAMPLE ATGARDEN REACH WATER TREATMENT PLANT. |
| 3 | MANUFACTURING, SUPPLY & DELIVERY OF SHAFT - SLEEVEMADE OF SS-316 FOR 647 CUM/HR., 15 MTRS HEAD SLUDGEPUMP AS PER SAMPLE AT GARDEN REACH WATERTREATMENT PLANT. |
| 4 | MANUFACTURING, SUPPLY &DELIVERY OF CASING RING MADE OF NICI FOR 647 CUM/HR., 15 MTRS HEAD SLUDGE PUMP AS PER SAMPLE AT GARDEN REACH WATER TREATMENT PLANT. |
| 5 | MANUFACTURING, SUPPLY &DELIVERY OF SPLIT GLAND MADE OF NICI FOR 647 CUM/HR., 15 MTRS HEAD SLUDGE PUMP AS PER SAMPLE AT GARDEN REACH WATER TREATMENT PLANT |
| 6 | MANUFACTERING, SUPPLY DELIVERY OF BAARING HOUSING MADE OF NICI FOR 647 CUM/HR., 15 MTRS HEAD SLUDGEPUMP AS PER SAMPLE AT GARDEN REACH WATERTREATMENT PLANT. |
| 7 | MANUFACTERING, SUPPLY DELIVERY OF LOCK NUT OFIMPELLER MADE OF SS FOR 647 CUM/HR., 15 MTRS HEADSLUDGE PUMP AS PER SAMPLE AT GARDEN REACH WATERTREATMENT PLANT. |
| 8 | MANUFACTERING, SUPPLY & DELIVERY OF LOCK NUT OFBEARING MADE OF SS FOR 647 CUM/HR., 15 MTRS HEADSLUDGE PUMP AS PER SAMPLE AT GARDEN REACH WATERTREATMENT PLANT. |
| 9 | BALANCING OF ROTATING ASSEMBLY OF 647 CUM/HR., 15MTRS HEAD SLUDGE PUMP INCLUDING LOADING, UNLOADINGAND TRANSPORTATION FROM AND TO AT GARDEN REACHWATER TREATMENT PLANT |
| 10 | TOTAL ROTATING ASSEMBLY & KEEP IT AT A SUOTABLEPLACE AFTER OPENING THE TOP COVER OF PUMP UNIT.DISMANTLING THE BEARING HOUSING AT BOTH END & AS PERDIRECTION OF EIC. |
| 11 | MANUFACTURING, SUPPLY & DELIVERY OF IMPELLER MADEOF NICI FOR 647 M?/HR., 15 MTRS HEAD SLUDGE PUMP ASPER SAMPLE AT GARDEN REACH WATER TREATMENT PLANT |
| 12 | MANUFACTURING.. SUPPLY DELIVERY OF BEARINGHOUSING COVER (D.E SIDE) MADE OF NICI FOR 647 M?/HR., 15MTRS HEAD SLUDGE PUMP AS PER SAMPLE AT GARDENREACH WATER TREATMENT PLANT |
| 13 | MANUFACTURING, SUPPLY &DELIVERY OF BEARING HOUSING COVER (N.D.E SIDE) MADE OF NICI FOR 647 M?/HR., 15 MTRS HEAD SLUDGE PUMP AS PER SAMPLE AT TP-1, GRWW. GARDEN REACH WATER TREATMENT PLANT |
| 14 | MANUFACTURING, SUPPLY &DELIVERY OF SUPPORTING FOOT MADE OF NICI FOR 647 M?/HR., 15 MT HEAD SLUDGE PUMP AS PER SAMPLE AT GARDEN REACH WATER TREATMENT PLANT. |
| 15 | M.S PLATE AS PER IS : 2062-2011/LATEST REVISION, MAKE:SAIL/TATA/JINDAL(B) ABOVE 2 MM UPTO 10 MM THICKNESS |
| 16 | Fabricating M.S. Specials of different diameter in shop out of 8 mm to 12 mm thick M.S plates supplied depart-mentally, cutting the plates to exact size & shape by gas cutting device and/or by adopting any other approved type of mechanical means, bending the same in true curvature by template and rolling machine of approved design including proper marking, levelling joints followed by electric arc welding - longitudinal and circumferential, as necessary, using standard electrodes as per I.S.specification including edge preparation, electricity charges and hydraulic testing of the fabricatedpiece all complete as per specification and direction of the Engineer-in-Charge.[ The Engineer-in-Charge shall approve the electrodes for are welding before use. Fabrication of M.S. flange to form M.S Flanged Tail Piece shall not be considered as M.S. special ] |
| 17 | Cutting to requisite length or shape departmental R.S. joists,channels, angles, tees, plates etc.(Payment to be made on area of cut surface) |
| 18 | Welding in M.S. structural work with gas or electric: (a) Tack weld |
| 19 | Welding in M.S. structural work with gas or electric: (b) Continuous weld. |
| 20 | Supply of M.S. Flange (slipper type) as per IS-6392 TABLE 17Thickness 12mm NB Diameter in mm 350 |
| 21 | Flange joint to C.l./D.l/MS. pipes and specials including supply of rubber gasket. nuts. bolts. washers etc. of best quality to make the joint watertight at required hydraulic pressure all complete as per specification & direction of the Engineer-in-Charge. Diameter in mm 350mm dia. Please Enable Macros to View BoQ information |
