|
| 1 | Dismantling concrete Cement concrete plain1:2:4 mix |
| 2 | Tack Coat @ 0.25kg per sqm: Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rateof 0.25 kg per sqm on the preparedbituminous surface/granular surface treatedwith prime coat after cleaning the surfacecomplete as per technical clause 503 ofMORT&H specifications |
| 3 | Tack Coat @ 0.40kg per sqm: Providing andapplying tack coat with penetration gradebitumen VG-10 using bitumen pressuredistributor at the rate of 0.40 kg per sqm onthe prepared bituminous surface/granularsurface treated with prime coat after cleaningthe surface complete as per technicalspecifications |
| 4 | Bituminous Macadam 50mm to 75mm thickness (Grading II): Providing and layingbituminous macadam 50mm to 75mm thickwith Continuous type hot mix plant usingcrushed aggregates of specified gradingpremixed with bituminous binder [email protected]%, laid over a previously preparedsurface with paver finisher Mechanical to therequired grade, level and alignment and rolledto achieve the desired compaction complete asper technical clause 504 of MORT&Hspecifications |
| 5 | Providing and laying semi dense bituminous concrete 25mm to 30mm thick with batch typeHMP using crushed aggregates of specifiedgrading, premixed with bituminous binderVG-30 @ 5%, laying with a hydrostatic paverfinisher with sensor control to the requiredgrade, level and alignment, rolling withsmooth wheeled, vibratory and tandem rollersto achieve the desired compaction complete as per IRC-111 (2009) specifications |
| 6 | Providing & fixing 560 mm, 500 mm and 450mm internal diametre circular or 450 mm x600 mm clear inside opening rectangular RCCmanhole cover and frame ISI marked as perIS:12592-2002 including carriage from thestores of the Engineer-in-charge to site ofwork, loading, unloading including stackingand setting the same to correct lines overmanholes including cement concrete copping(M:20) around the frame etc. Dia of steel forlifting hook is 16mm (for EHD and HD) RCC Man hole cover with Frame 500mm i/d RCC man hole cover with frame asper ISI Medium duty |
| 7 | Providing and fixing RCC manhole covers only 500mm i/d RCC man hole cover only as perISI Medium duty |
| 8 | Constructing brick masonry road gullychambers as per standard drawings (as persizes given below) including dressing of bedsand sides of chambers to exact profiles, 15cmthick C.C 1:6:12 in foundation, first classbrick work laid in cement sand mortar 1:5,40mm thick cement concrete 1:2:4 toppinginside the chamber with a floating coat of1.5mm thick neat cement laid in one operationto the topping, the entire inner surface of thechamber rendered with neat cement not lessthan 12.50mm in thickness of 1:2 cementsand plaster and finished with a floating coatof neat cement 1mm thick left absolutelysmooth polished and correct to templateincluding cost of precasted RCC road gullygrating and frame including paint with coal tar(as specified in item No. 29.49) complete andto the requirement of the Engineer-In-Charge. Single Road Gully chamber Size 610mm x 457mm x 800mm |
| 9 | Providing & Fixing RCC Road Gully grating &frame RCC Road Gully grating & frame size 610mm*457mm |
| 10 | LOADING AND UNLOADING Stone (building or pitching) Sand, Earth, Fly Ash, Bajri, Shingle, Spalls, Brick bats, Brickballast and Stone metal. |
| 11 | Earth,Surkhi, Sand, Earth, Fly Ash, Bajri,Ballast, Stone boulders, Kankar and buildingrubbish, Earth 5.0 km Please Enable Macros to View BoQ information |
