|
| 1 | Supply and Erection of LED Street Light 25 watt (includingLED driver) with pressure die cast aluminium housing withcontrol gear ( with IP 65/ IP 66 protection), CRI Minimum70, CCT >5700K, toughened glass fitting, LED fixtureminimum 120 lumens per watt and operating voltagebetween 140 to 270 volt, THD <10% ingress protection (asper BIS standards) , surge protection 10kv and above (asper (IS/IEC standards) wattage of each LED Highpower LED of 1 watt to 5 watt with mandatory modularlenses, input AC frequency 50 Hz ± 3 % 5 year warrantyincluding their drivers complete along with erectionof the same with connections, testing etc. complete in allrespects as approved and desired by theEngineer-in-charge at site.LED Fitting as per Specificationsapproved by Hon. Tech. Advisor to CM Punjab videLetter no AT-2021/GL 1410-1422 Dated06/05/2021. Dated 06/05/2021. Besides this thelighting fixture manufactures should have in house NABLaccredited labortary. Make As desired by Engineer in charge. |
| 2 | Supply and Erection of LED Street Light 35/36 watt(including LED driver) with pressure die cast aluminiumhousing with control gear ( with IP 65/ IP 66protection), CRI Minimum 70, CCT >5700K, toughenedglass fitting, LED fixture minimum 120 lumens perwatt and operating voltage between 140 to 270 volt, THD<10% ingress protection (as per BIS standards) , surgeprotection 10kv and above (as per (IS/IEC standards)wattage of each LED High power LED of 1 watt to 5 wattwith mandatory modular lenses, input AC frequency 50Hz ± 3 % 5 year warranty including their driverscomplete along with erection of the same with connections,testing etc. complete in all respects as approved anddesired by the Engineer-in-charge at site.LEDFitting as per Specifications approved by Hon. Tech.Advisor to CM Punjab vide Letter no AT-2021/GL1410-1422 Dated 06/05/2021. Dated06/05/2021. Besides this the lighting fixture manufacturesshould have in house NABL accredited labortary. Make Asdesired by Engineer in charge. |
| 3 | Single arm bracket 1 meter long made of 25mm dia.ISI mark as per IS no. 1239Galvanized Iron Pipe . |
| 4 | Single arm bracket 1 meter long made of 32mm dia.ISImark as per IS no. 1239 Galvanized Iron Pipe . |
| 5 | MS flat clamp size 25mm x 5mm x 50cm Long completewith 3 no’s 10mmx 75mm fasteners, Clamps includingPrimer and Paint suitable for Street Light Poles. |
| 6 | OVER HEAD DISTRIBUTION ALUMINIUMCABLES, ACSR CONDUCTORS, CLAMPS, JUMPERS & JOINT KITS: Wiring over-head line in PVC insulated & PVC sheathedtwo single core aluminium conductor cable overall 1100volts grade binding with G.I. wire 2mm dia. (14 SWG) withbrass/ aluminium link clips complete in all respect asapproved and desired by the Engineer In-Charge at site PVC insulated & PVCsheathed aluminium conductor cable Overall Size10mm² (1/1.40mm) Twin Core |
| 7 | PVC INSULATED FR COPPER CONDUCTORCABLES: Supply and erection of PVC insulated FR single coreUnsheathed copper conductor cable (ISI marked) suitableupto 1100 volts grade confirm to IS:694/1990 left bare inpipe or casing of suitable size complete in all respect asdesired by the Engineer-in-charge:-Overall size 1.5sq.mm (Un-sheathed) |
| 8 | S/E of Microprocessor Based Street Light Controllerwith digital time switch daily programmed with stand bylithium battery with back up of 6 years with min. timebetween 2 switching operations is 1 minute, threepole power contactors 40A. with coil voltage 220-230V ACwith 1 no. aux. contact NO, MCB 2 pole 40amp. (C-Curve,10kA) & power wiring with single core PVC insulated FRcable 10 sq. mm and control wiring with PVC insulated FRcable 1 sq. mm, 1 no. two position selector switch tobypass timer and other accessories & petty material(din rail, 4 pole bakelite terminal strip 63A/ 440V AC,required nut bolts) should be fixed on bakelite sheet 6mmthick to be mounted in a IP54 surface/ flush mountingpowder coated sheet metal (1.60mm thick) cabinethaving size 450mm x 600mm x 150mm to switch ‘ON’ allthe 3 phases & switch ‘OFF’ 3 phases pre-fixed timingscomplete in all respect as per satisfaction ofEngineer-in-charge:-Street Light Controller (For Three Single Phase Circuits) with 3 Nos. ThreePole Power Contactors 40A, 1 no. aux. contactor 6 amp.(2NO+2NC) with coil voltage 220V AC, 3 Nos. MCB 2 Pole40amp. (C-Curve,10kA) & petty material (Din rail, 2 Nos.4 pole bakelite terminal strip 63A/ 440V AC, required nutbolts) Please Enable Macros to View BoQ information |
