|
| 1 | Item Rate BoQ 82553/E8 BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE JAIPUR Name of Work: MAINTENANCE / REPAIR OF WATER SUPPLY DISTRIBUTION WATER SYSTEM AND UNSERVICEABLE DISTRIBUTION PIPE LINES, SLUICE VALVES AND GATE VALVE RUSTED PIPE LINES, REPAIR TO CHAMBERS AT NORTHERN, CENTRAL, SOUTHERN SECTOR AND ABHERA CAMP AT MIL STN KOTA. CA NO: CWE/KOTA- OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # NUMBER # SNo Item Description Item Code / Make Qty Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rate in Figure Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes Rate in Words Total Amount |
| 2 | Labour only for attending day to day domestic area/OTM area water supply complaints of water pipe size up to 20 mm of bore of potable water pipe lines in all nature including leakage of pipe line, GI fittings, over flow of over head tank, direct kitchen tap and taking out/dewatering water from shafts/trenches during repair and make functional the pipe line and restore supply complete all as specified and directed.Notes :- (i) The pipe fitter/Plumber shall always be in possession of die set with cutters ,Taps, pipe wrench, chain wrench, complete set of spanners and ladders etc as required at site.(ii) Contractor shall deploy adequate pipe fitter/Plumbers at MES complaint cell at Southern, central & Northern sectors along with helpers as directed by Engr in charge.(iii) If the contractor fail to rectify the complaint with in same day from the complaint date, then a penalty @ Rs 200 Per complaint per day shall be levied on the contractor. (iv) Any material required for attending complaints shall be measured and paid seperately under respective item here in after as \\"supply only\\" item. |
| 3 | Description all as per Item No 1.00 above but size of pipe above 20 mm to 25/32mm. |
| 4 | Description all as per Item No 1.00 above but size of pipe 40mm. |
| 5 | M&L for finding external water pipe of size more than 50mm of Pump house and of any length, type and bore, rectification of valve and joint leakages of any kind such as run lead joint/spigot and socket joint/flange joint/D joint etc including welding and provision of jointing materials/joint such as lead/flanges/clamps /jute/rubber gasket /nuts/bolts / washers/ grease/socket/D joint etc and testing of water line in presence of JE/Engr in Charge, complete all as specified and directed.Notes: (i) The cost of labour for excavation in any kind of strata, cutting of RCC/PCC surfaces/road and making good, returning filling, fixing of joint, T&P etc and making good to the existing as required at site shall deemed to be included in the quoted unit rates.(ii) Testing shall be carried out in the presence of Engineer-in-Charge to the satisfaction of the Deptt.(iii) Rubber tyton or run lead joint of pipes and fittings for repair shall be measured and paid separately under appropriate items. However cost of nut, bolts, clamps, flange, rubber packing, welding work as required and D joint of any size shall be included in the quoted rate. (iv) Repair to the leakage shall be rectified within 24 hours after informing, in case of failing which a penalty of Rs 500.00 per hour per complaint shall be imposed on the contractor for delay in rectification of leakage. |
| 6 | Description all as per Item No 4.00 above but size of pipe above 50 mm to 80/100 mm. |
| 7 | Description all as per Item No 4.00 above but size of pipe 150 to 200 mm. |
| 8 | Supply and Fixing in repairs, cast iron double flanged long type, lever operated, butterfly valve, size 150 mm, PN 1.6, ISI Marked (IS-13095:1991, Reaffirmed 2003),including provision of carbon steel nuts, bolts & washers, rubber gaskets etc., fixed to water mains, complete all as specified and directed |
| 9 | Description all as per Item No 7.00 above but 100 mm dia. |
| 10 | Description all as per Item No 7.00 above but 80 mm dia. |
| 11 | Description all as per Item No 7.00 above but 50 mm dia. |
| 12 | Materials and Labour for valve chamber of size 1250 mm X 1150 mm X 1000 mm (internal dimensions) with PCC (1:2:4) type B1 using 20 graded aggregate as in foundation 100 mm thick brick masonry one brick thick wall in CM (1:4) coping with PCC (1:2:4) type B1 50 MM thick plastering internal and external walls upto 150 mm below GL in CM (1:4), 3 mm thick MS plate welded with 40 x 5 mm thick FI frame all round including provision of hinges, handles, locking arrangement, ISA 50 x 50x 6 mm thick angle iron frame for chamber cover fixed with chamber using 4 nos hold fasts made of 50 x 6 mm thick MS flat iron of suitable length, mild steel chamber cover 4 mm thick, braced with 50 x 6 mm MS flats, fixed with handle made of 10 mm dia MS bar suitably welded of 200 mm length and locking arrangement, two coats of cement based painting on plastered surfaces and two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer and including taking down existing unserviceable valve pit cover, complete all as specified and directed. |
| 13 | Supply and installing, connecting and testing of cast iron non return valve, double flanged / built weld end bolted cover, swing check type, ISI marked, designed as per BS-1868, pressure rating PN 10, including jointing materials and any welding works such as welding of flanges, fixing of rubber gasket, carbon steel nuts, bolts and washers etc & including taking down old unserviceable existing non return valve complete all as specified and directed of the following sizes :-100 mm bore |
| 14 | Description all as per Item No 12.00 above but 80 mm bore. |
| 15 | Supply and installed, connecting and testing of sluice valve, class PN 1.6 double flanged CI body, wheel and brass spindle and nuts, non rising type, IS-14846 ISI marked including jointing materials such as rubber gasket, carbon steel nuts, bolts and washers etc & including taking down old unserviceable existing sluice valve complete all as specified and directed of the following sizes :-200 mm |
| 16 | Description all as per Item No 14.00 above but 150 mm dia. |
| 17 | Description all as per Item No 14.00 above but 100 mm dia. |
| 18 | Description all as per Item No 14.00 above but 80 mm dia. |
| 19 | Material and labour for clearing of all surrounding area of each pump houses, UG sump, OHT area of duration once in every months upto one meter outside fencing by surface excavation upto 10 cm average depth including removing shrubs, grass, implant, small bushes, branches of tree and other unwanted materials/stones etc and levelling surface in pump house with machinery or manually complete all as specified and directed. Note: Contractor shall responsible for arrangement of necessary grass cutting/cleaning/chemical sprays and trimming trees and removal of unwanted plants using grass cutting machine and filling low patches with the scrapping soil to make good look to site and disposing off all unwanted grass. |
| 20 | M&L for painting of water distribution header of existing size including painting to all connected pumping/distribution pipes of header in blue colour upto 10 meter lengths of size upto 150 mm dia, cleaning of entire surface with fine sand paper and applying two coats of synthetic enamel paint by spray over one coat of red oxide primer including arrow marking & writing names of distribution lines on water header in while colour from painter all as specified and as directed. Make of paint: Asian paint/Berger/ISI approved |
| 21 | Material and labour for MS cover with MS plate 3.15 mm thick of requires size at various valves pit covers along with MS Angle 50 X 50 X 6 mm for valve chamber or sump openings. The cover shall be fitted with door handles , hinges and complete fixing of MS angle duly grouted in PCC with fasteners. The MS plate and MS angle shall be painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer and including taking down existing unserviceable valve pit cover, complete all as specified and directed. |
| 22 | Supply only of GI elbow for GI pipes complete all as specified and directed of following bore of pipes: -15mm bore |
| 23 | Description all as per Item No 21.00 above but 20mm bore. |
| 24 | Description all as per Item No 21.00 above but 25mm bore. |
| 25 | Supply only in renewal of GI tee for GI pipes complete all as specified and directed of following bore of pipes: -15mm bore |
| 26 | Description all as per Item No 24.00 above but 20mm bore. |
| 27 | Description all as per Item No 24.00 above but 25mm bore. |
| 28 | Supply only in renewal of GI socket for GI pipes complete all as specified and directed of following bore of pipes: -15mm bore |
| 29 | Description all as per Item No 27.00 above but 20mm bore. |
| 30 | Description all as per Item No 27.00 above but 25mm bore. |
| 31 | Supply only in renewal of GI union threaded for GI pipes complete all as specified and directed of following bore of pipes: -15mm bore |
| 32 | Description all as per Item No 30.00 above but 20mm bore. |
| 33 | Description all as per Item No 30.00 above but 25mm bore. |
| 34 | Supply only in renewal of GI nipple 6\\" length threaded for GI pipes complete all as specified and directed of following bore of pipes: -15mm bore |
| 35 | Description all as per Item No 33.00 above but 20mm bore |
| 36 | Description all as per Item No 33.00 above but 25mm bore |
| 37 | Supply only in renewal of GI nipple 4\\" length threaded for GI pipes complete all as specified and directed of following bore of pipes: -15mm bore |
| 38 | Description all as per Item No 36.00 above but 20mm bore |
| 39 | Description all as per Item No 36.00 above but 25mm bore |
| 40 | Supply only in renewal of GI nipple 3\\" length threaded for GI pipes complete all as specified and directed of following bore of pipes: -15mm bore |
| 41 | Description all as per Item No 39.00 above but 20mm bore |
| 42 | Description all as per Item No 39.00 above but 25mm bore |
| 43 | Supply only in renewal of GI Cap plug threaded for GI pipes complete all as specified and directed of following bore of pipes: -15mm bore |
| 44 | Description all as per Item No 42.00 above but 20mm bore |
| 45 | Description all as per Item No 42.00 above but 25mm bore |
| 46 | Supply only in renewal of GI reducer of size 25\\"x15\\" complete all as specified and directed |
| 47 | Supply only in renewal of GI reducer of size 25\\"x20\\" complete all as specified and directed |
| 48 | Supply only PTMT float valve with epoxy coated aluminum rod and high density plastic ball complete all as specified and as directed of following bore :- 20 mm bore |
| 49 | Description all as per Item No 47.00 above but 25mm bore |
| 50 | Supply only in renewal of Gun-metal, globe or gate valves, ISI marked with iron wheel head, screwed both ends for iron pipe and fixed of following bore :-50 mm bore |
| 51 | Description all as per Item No 49.00 above but 40 mm bore |
| 52 | Supply only in renewal of Gun-metal, globe or gate valves, ISI marked with iron wheel head, screwed both ends for iron pipe and fixed of following bore :- 25 mm bore |
| 53 | Description all as per Item No 51.00 above but 20 mm bore |
| 54 | Description all as per Item No 51.00 above but 15 mm bore |
| 55 | M & L fabrication (welding work) of MS header/any size upto 400mm MS pipe at various pump houses for arresting leakages on header complete all as specified and directed. |
| 56 | Excavation in trench in soft/loose soil not exc. 1.5 mtr width and n. exc 1.5 mtr in depth and getting out for taking up or laying water pipe line. |
| 57 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick. |
| 58 | Removing excavating material n.exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point. |
| 59 | Taking up cast iron water mains/DI/GI (including all fittings), with spigot and socket ends and lead joints, 150 mm bore, including burning off lead joints and recovering lead complete all as specified and directed. |
| 60 | Taking up cast iron water mains/DI (including all fittings), with spigot and socket ends and lead joints, 100 mm bore, including burning off lead joints and recovering lead complete all as specified and directed. |
| 61 | Taking up or down, steel / CI/GI tubing, and connection including cleaning for re-fixing or removal from site of work, 100 mm bore, complete all as directed. |
| 62 | Description all as per Item No 60.00 above but 80 mm bore |
| 63 | Description all as per Item No 60.00 above but 50 mm bore |
| 64 | Description all as per Item No 60.00 above but 25 mm bore |
| 65 | Description all as per Item No 60.00 above but 20 mm bore |
| 66 | Description all as per Item No 60.00 above but 15 mm bore |
| 67 | M & L for Refixing/laying, Jointing and testing old GI steel tubing of following sizes, retrieved from taking down in new or old position at walls, ceiling or floor etc including cleaning or re running the old screw threads at walls, ceiling or floor etc in cluding providing GI fittings complete all as specified and directed. 100 mm bore |
| 68 | Description all as per Item No 66.00 above but 80 mm bore |
| 69 | Description all as per Item No 66.00 above but 50 mm bore |
| 70 | Description all as per Item No 66.00 above but 25 mm bore |
| 71 | Description all as per Item No 66.00 above but 20 mm bore |
| 72 | Description all as per Item No 66.00 above but 15 mm bore |
| 73 | Supply & laying/fixing in renewal of steel water tubing, galvanised, medium grade with and including all fitting, laid in trenches, complete all as specified and directed of following bore of pipes: -100 mm bore |
| 74 | Description all as per Item No 72.00 above but 80 mm bore |
| 75 | Description all as per Item No 72.00 above but 50 mm bore |
| 76 | Description all as per Item No 72.00 above but 25 mm bore |
| 77 | Description all as per Item No 72.00 above but 20 mm bore |
| 78 | Supply & laying/fixing in renewal of steel water tubing, galvanised, medium grade with and including all fitting, fixed to walls, ceilings or laid in floors, complete all as specified and directed of following bore of pipes: -25 mm Bore |
| 79 | Description all as per Item No 77.00 above but 20mm bore |
| 80 | Description all as per Item No 77.00 above but 15mm bore |
| 81 | Description all as per Item No 77.00 above but 50mm bore |
| 82 | Description all as per Item No 77.00 above but 80 mm bore |
| 83 | Description all as per Item No 77.00 above but 100 mm bore |
| 84 | Supply & laying/fixing, connecting, jointing and testing ductile iron pressure pipe for water mains, centrifugally cast with spigot and socket ends (for push on joints) class K-7, in any length in trenches, under floor, under road and including making and fixing suitable size clamps at place of CI/DI line joint, complete all as specified and directed for following bore pipes:-100 mm bore |
| 85 | Description all as per Item No 83.00 above but 150 mm bore |
| 86 | Supply & laying/fixing, connecting, jointing and testing ductile iron pressure pipe for water mains, centrifugally cast with spigot and socket ends (for push on joints) class K-9, in any length in trenches, under floor, under road and including making and fixing suitable size clamps at place of CI/DI line joint, complete all as specified and directed for following bore pipes:-100 mm bore |
| 87 | Description all as per Item No 85.00 above but 150 mm bore |
| 88 | Notes for Item No 83.00 to 86.00 :-(i) Rubber tyton or run lead joints of pipes shall be measured and paid separately under respective items here-in-after.(ii) Cast iron fittings/specials shall be measured and paid separately under respective items here-in-after.(iii) Old unsv rusted CI/DI/GI of any bore of pipes shall be replaced under above item.(iv) Piecemeal site for laying of pipe shall be given by EIC as per site requirements and contractor shall arrange transportion of equipments through their own arrangements . |
| 89 | M & L for rubber gasket joints (push on joints) for spigot/socket end ductile iron water mains/ductile iron specials complete for 100 mm nominal dia complete all as specified and as directed. |
| 90 | Description all as per Item No 88.00 above but 150 mm dia |
| 91 | S & F for ductile iron fittings for upto 150 mm bore spigot socketed pipes such as bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.), Tee pieces, single branch, \\"Y\\" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc and including taking out old u/s existing fittings complete all as specified and directed. |
| 92 | M & L for joint with rubber or fibre board gasket for galvanized steel flanged pipes and fittings & including providing nuts, bolts, washers etc and white lead or mineral oil after taking down existing joint, complete all as specified and directed for the following bore of pipes: -150 mm bore |
| 93 | Description all as per Item No 91.00 above but 100 mm bore |
| 94 | Description all as per Item No 91.00 above but 80 mm bore |
| 95 | M&L for replacement of graphite gland packing for sluice valve upto size 250mm and cenntrifugal pump complete all as specified and directed |
| 96 | M&L for run lead joint for CI spigot and socketed pipes and fittings including allied jointing material i.e. spun yarn etc, & including taking down old u/s pig lead complete all as specified and directed for following bore pipes:-200 mm bore |
| 97 | Description all as per Item No 95.00 above but 150 mm bore |
| 98 | Description all as per Item No 95.00 above but 100 mm bore |
| 99 | Supply and fixing in replacement of Moulded polyethylene water storage tank cylindrical vertical with closed top, 500 ltrs ,trippled layers, hoisted and fixed in position after taking down as existing at site for priming the various pump motors complete all as specified and directed |
| 100 | Attending complaints to all kinds of pump motors by qualified mechanic to check and test DOL/star-delta starter connections including settings of relay and timer, NO & NC contacts, main power connections, fixing of cable joints, fixing gland packing of appropriate size to the pump motors, rectifying pump leakages by replacing flange, rubber packing and nut bolts of existing size and cleaning of pump motors to confirm the satisfactory running complete all as specified and directedNote: (i) The cost of minor spares such as lugs of all size, wires, nut, bolts, washer, Flanges, rubber packing, gland packing, cable joints etc shall be included in quoted rate by contractor. (ii) Contractor shall be responsible for Repair to defects after informing within 24 hours. In case of failure noticed, than recovery shall be effected @ Rs.500/- per hour beyond 24 hrs. |
| 101 | M& L for cleaning of service tanks at Pump houses & E/M installations areas with dewatering pump and using mild power chemicals for removing dirt and dust from tanks ,using scrubbing materials for removal of green/grey strains inside water tanks complete all as specified and directed. |
| 102 | Supply & installation with testing of Ultrasonic sensor sensing range not less than 10 M, V15 Connection Analog Current and voltage output operating at single phase supply and installed at UG sump along with protection system, copper wiring, connections from existing panels complete all a specified and directed. |
| 103 | Supply and installation of remote digital LED display for WATER LEVEL INDICATION low and high alarm with hooter. The display shall be of 150 mm size digit display system which must show water level in meter/centimeter or gallon of water level of OVER HEAD TANK ensuring alarm while water fall or rise at predetermined limit and 1 minute auto off alarm. |
| 104 | Supply and fixing in replacement of shielded sensor copper cable from OHT / sump to LED display meter not less than 1.5 sqmm and 3 core .The cable shall be laid under GI pipe of 15mm size complete all as specified and directed by Engr-in-Charge.Note: Cost of GI pipe and T&P required for installation shall be included in the quoted rate. |
| 105 | M & L for carrying out all chemical parameters and bacteriological tests of treated water from NABL approved lab & maintain the record of as per frequency complete all as directed. 3 Tests per months at 3 pump houses of ( Southern sector) -01,(central sector -01), (Northern Sector-01)Note :- In case of failure noticed more than 1 Month recovery shall be effected @ Rs. 500/- per Hrs beyond One Month. |
| 106 | M & L in renewal of heavy duty ball type MS foot valves flanged end swing type operation with rubber seat as per IS4038 of following types, including nuts, bolts and washers etc complete.80 mm bore |
| 107 | Description all as per Item No 105.00 above but 100 mm bore |
| 108 | Description all as per Item No 105.00 above but 150 mm bore |
| 109 | Material and labour for Display boards made with of ABC acrylic material of sizes 4 'x 2.5' x 0.5 ' (Lx B x T)with containing blue back ground with white incolour of capital letters 50mm heights with showing machine history details in 5- 8 Rows of various pumps/ motors/ sewages pumps, bore wells along with fixing arrangements as list given by EIC complete all as specified and directed. NOTE :- Display details/Drgs/ of boards list shall be approved before finalize the printing at Engr-In-Charge. |
| 110 | Supply & fixing of cylindrical shaped media- floating media of MBBR reactors in PP construction wagon sheel design having density (0.94-0.96 gm per cm3, size 12 x 25mm) less than water, Wagon wheel design having specific surface area not less than 500m2/m3, complete all as specified and directed. Make: Declibac or equivalent |
| 111 | M & L for repair and maintenance of dosing system including servicing of pressure feed pump of cap 1.0 HP, servicing of geared motor, injection check valves, clay weight, GI pipe for connection, servicing of agitator with shaft, renewal of oil seal, gland packing, capacitor upto 6 mfd, gear oil change etc., complete all as directed by Engineer in charge. Note :- All the material & spares required to make system functional shall be included in the quoted rate. |
| 112 | M&L for Earthing with galvanized steel earth plate electrode of size 600 mm x 600mm x 6.0 mm thick, buried directly in ground (earth plate not less than 2.25 Mtr below normal ground level) connected to galvanized earth strip of 25x4 mm dia by means of bolts, buts, check nuts and washers of galvanized iron on steel including 40 mm bore light grade GI tubing for protection of earth strip, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm bore, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type 75 mm thick precast RCC (1:2:4) type B1 pit cover reinforced with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar including GI earth strip of 25x4 mm size for extension of earth lead and necessary excavation, earth work, in soft/loose soil and disposal of spoils to a distance not exc 50 Mtr and necessary connection and testing complete all as shown in electrical plate No. 3 and including dismantling of old u/s earthing complete all as specified and directed. complete all as specified and directed. Notes: - (a) Irrespective of whatever is shown in plate No 3 of SSR, earth pit shall be casted in PCC (1:3:6) type C-1 and precast cover of RCC (1:2:4) type B-1 with suitable handle. (b) Item includes the cost of GI pipe for protection of earth wire and earth lead strip upto 7.5 m. |
| 113 | Schedule of Credit Total in Figures 0.0 0.0 -322323.0 Quoted Rate in Figures Select 0.0 0.0 Zero Only 0.0 Quoted Rate in Words INR Minus Three Lakh Twenty Two Thousand Three Hundred & Twenty Three Only Please Enable Macros to View BoQ information |
