|
| 1 | 2nd class hard wood in scantling clean swan and fixed in position complete all all as specified. |
| 2 | Factory made 35 mm thick ,2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);,etc complete all all as specified. |
| 3 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window /Ceosetory windows & other Frames/Chowkhat of size 63x51 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gm) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/Cu.m, screw withdrawl strength of 2200N Face & 1100 N (Edge), minimum compressive strength of 58 N/ Sq.mm, modules of elasticity 900 N/Sq.mm and resistance to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete. |
| 4 | Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, thickness 30 mm,etc complete all all as specified. |
| 5 | Factory made solid PVC moulded door shutter, 28-30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2 mm thick plain colur PVC sheet on back face, as shown on page 181 of MES Schedule Part-II, complete all as specified. |
| 6 | Aluminium anodised barrel tower bolt of extruded section 150mm long, ISI marked,IN REPLACEMENT complete all as specified. |
| 7 | Aluminium alloy, anodised, ISI marked sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 250 mm long,IN REPLACEMENT complete all as specified. |
| 8 | Brass bolts, ISI marked sliding door bolt with Die-cast brass and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or brass bolts of 375 mm long, IN REPAIRS, complete all as specified and directed. |
| 9 | Stainless steel 100mm long butt hinges with stainless steel screws, ISI marked complete all as specified. |
| 10 | Continuous (Piano) hinges, mild steel, bright finish or electro galvanised having 30mm width of flap when opened complete all as specified. |
| 11 | Extruded aluminium anodised handles fabricated type with plate 125 mm long, ISI marked complete all as specified. |
| 12 | Extruded aluminium anodised handles fabricated type with plate 150 mm long, ISI marked, IN REPLACEMENT, complete all as specified. |
| 13 | Double leg aluminium anodised door stopper with rubber foot, ISI marked and fixed to bottom rail of doors with steel screws, complete. |
| 14 | 04 levers brass mortice lock, vertical type, 100 mm size, with 2-3 keys, IN REPLACEMENT, complete all as specified. |
| 15 | Magnetic door catcher for wardrobe and cupboard having 50x27mm complete all as specified. |
| 16 | Door seal bottom primium painted brown aluminium body 18mm high with long lasting 22mm high nylon rubber fix to door to stop drafty and air gap, rubber shield 36.5'' / 94 cm and height 40mm, anti rust black rubber with coated black screws to be fix on almost any door type IN REPLACEMENT, complete all as directed. |
| 17 | Double action floor door spring, hydraulically regulated, made of 1.25 mm thick aluminium alloy sheet, foundation box main body with stainless steel cover, governing pivot made of brass, rest of part made out of heavy duty mild steel, ISI marked, IN REPLACEMENT, complete. |
| 18 | Aluminium (Die cast) door closer hydraulically regulated designation No. 3 aluminium body universal type suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg, ISI marked, IN REPAIRS, complete all as specified. |
| 19 | Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks or steel wire staples, all as specified. |
| 20 | Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks or steel wire staples IN REPLACEMENT, all as specified. |
| 21 | Stainless steel conduit 25 mm bore, cut to size and erected in position as curtain rod on backets, with & including SS decorative finials & brackets, PVC rings @ 10 nos. per metre, fixed to walls with PVC rawl plugs & SS screws, IN REPLACEMENT, all as specified.. |
| 22 | Framed mild steel work such as grills, chowkhat for fixing, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290-Gde E-165, complete all as specified. |
| 23 | Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 24 | Powder coated aluminium door shutters with styles & rails, anodised alumnium glazing snap beading, rubber neoprene packing including joining cleats & screws etc as per manufacturers instructions, complete all as specified. NOTES: (a) Each shutter shall have 2 Nos. 200 mm long almn handles and 03 No. 100 mm size stainless steel/almn butt hinges.(b) Glass and other filling materials in panels including wire cloth and almn grill shall be measured & paid for separately under respective item of BoQ.(c) For powder coated aluminum sections minimum thickness of powder coating shall be 50 micron. |
| 25 | Powder coated aluminium window and ventilator shutters side hung type with aluminum section weighing 0.55 Kg/m, anodised alumnium glazing snap beading rubber neoprene packing including joining cleats & screws etc as per manufacturers instructions, complete all as specified. NOTES: -(a) Each shutter shall have 2 Nos. 125 mm long almn handles and 02 No. 75 mm size stainless steel/almn butt hinges & one no. almn hook & eye.(b) Glass and other filling materials in panels including wire cloth and almn grill shall be measured & paid for separately under respective item of BoQ.(c) For powder coated aluminum sections minimum thickness of powder coating shall be 50 micron. |
| 26 | Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including 6 mm dia. GI hangers (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and 40 mm long 12.5 mm dia expansion hold fasteners with and including 12 mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish, including cutting holes for fixing ceiling light if any complete |
| 27 | Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of green / blue colour hving tensile strength of 550 Mpa as in roof coverng/ cladding to wall, fixed with self tapping screws comlete all as specified. |
| 28 | Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm of green / blue colour hving tensile strength of 550 Mpa as in roof coverng/cladding to wall, fixed with self tapping screws etc. complete all as specified. |
| 29 | 18mm thick prelaminated board shutters medium density fiber (MFD), exterior grade, fixed to timber framework with screws for cupboards, omplete all as specified. |
| 30 | Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:6) complete all as specified. |
| 31 | Two coats of interior acrylic distemper over and including a coat of acrylic emulsion primer. on new plastered wall surfaces, including preparation of surfaces, complete all as specified. |
| 32 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surroundings; glazing with putty or fixed with beads complete all as specified |
| 33 | Sheet glass 5.5mm thick ordinary quality and glazing with oil putty or aluminium beads in squares n. exc. 0.5 Sq.m in each pane complete all as specified. |
| 34 | Sheet glass 4 mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5sqm in each pane complete all as specified. |
| 35 | Figured glass, 4 mm thick, pin head type and glazing with linseed oil pane putty & spring glazing clips, in squares exceeding 0.5 sq.m in each pane complete all as specified. |
| 36 | Two coats of synthetic enamel paint over & including a coat of pink primer over new wood and wood based surfaces of any description not other wise described over 10cm width or girth, including preparation of surfaces complete all as specified. |
| 37 | Two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified. |
| 38 | Taking up or down steel tubing and connections from existing location, complete all as specified of size: - |
| 39 | 15mm bore |
| 40 | 20mm bore |
| 41 | Steel tubes ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors, complete all as specified of size: - |
| 42 | 15 mm outer dia |
| 43 | 20 mm outer dia |
| 44 | Fixing only Steel tubes ‘medium grade’, ISI marked, galvanized with all fittings, laid in trenches and connections, complete all as specified, of size as under: - |
| 45 | 15 mm outer dia |
| 46 | 20 mm outer dia |
| 47 | 500 litre capacity, white, three layered polyethylene water storage tanks (cylindrical vertical with threaded lid) including hoisted and fixed in position, making connections, IN REPLACEMENT, complete all as specified including the following acessories: -(i) Gun metal ball valves, high pressure, with metal rod & high density plastic ball complete screwed for iron pipe or brass ferrule and fixed, suitable for 20 mm bore GI pipe, complete all as specified.(iii) Gun-metal stop valve (quarter turn type) with MS lever handle, suitable for 20 mm bore GI tubes, ISI marked, screwed both ends for iron pipe, IN REPAIRS, complete all as specified.(iv) Provn of 20 mm bore GI light grade tube from O/H tank to nearest mouth of RWP, IN REPAIRS, complete all as specified. |
| 48 | 1000 litre capacity, white, three layered polyethylene water storage tanks (cylindrical vertical with threaded lid) including hoisted and fixed in position, making connections, IN REPLACEMENT, complete all as specified including the following acessories: -(i) Gun metal ball valves, high pressure, with metal rod & high density plastic ball complete screwed for iron pipe or brass ferrule and fixed, suitable for 20 mm bore GI pipe, complete all as specified.(iii) Gun-metal stop valve (quarter turn type) with MS lever handle, suitable for 20 mm bore GI tubes, ISI marked, screwed both ends for iron pipe, IN REPAIRS, complete all as specified.(iv) Provn of 20 mm bore GI light grade tube from O/H tank to nearest mouth of RWP, IN REPAIRS, complete all as specified. |
| 49 | Ball brass valve, high pressure with polythene float and flynut complete screwed for iron pipe or brass, IN REPLACEMENT, all as specified as following dia:- |
| 50 | 20mm dia |
| 51 | 25mm dia |
| 52 | PVC water storage tank cover with fitting, IN REPAIRS, complete all as specified of capacity: - |
| 53 | 500 Litre |
| 54 | 1000 Litre |
| 55 | Steel tubes ‘medium grade’, ISI marked, galvanized with all fittings, laid in trenches and connections, complete all as specified, of size as under: - |
| 56 | 15 mm outer dia |
| 57 | 20 mm outer dia |
| 58 | 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe (minimum weight 15mm-120gms), IN REPAIRS, complete all as specified. |
| 59 | Bib tap, cast copper alloy, chromium plated fancy type, long body with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete. |
| 60 | Angular stop valve/cock, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete. |
| 61 | Concealed stop valve/cock, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete. |
| 62 | Pillar tap, cast copper alloy, chromium plated fancy type, quarter turn type, screwed down high pressure with or without lettered hot or cold with long shank for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete. |
| 63 | Wall mixer 3 in 1 system telephonic with crutch shower with L bend & with provn for both hand shower, cast copper alloy, chromium plated fancy type, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete. |
| 64 | Center hole basin mixer without pop up, cast copper alloy, chromium plated fancy type, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete. |
| 65 | Vitreous China wash down water closet pan (pedestal pattern), white ISI marked, with & including Health faust with 1 metre SS tube & hook, soft close ISI marked PVC seat & cover with & including mild steel chromium plated hinging device and uPVC 'S trap, IN REPAIRS, complete all as specified. |
| 66 | Vitreous china wall mount EWC in geometric shape with seat cover SS bolt and P trap etc complete |
| 67 | Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, ISI marked, white, with integral foot rests (excluding flushing cistern and flush pipe), IN REPAIRS, complete all as specified. |
| 68 | PVC flushing cistern 10 litre capacity, syphonic action type, any shade, dual flush, ISI marked with flush pipe and all fixing acessories, IN REPAIRS, complete all as specified. |
| 69 | Vitreous China wash basin, white, flat back, size 550 x 400 mm, ISI marked, including fixing acessories like rag bolts etc. with CP waste coupling half or full threaded suitable for & including 32 mm size PVC solid waste pipe, IN REPAIRS, complete all as specified. |
| 70 | Vitreous China half stall Urinal pot, white, size 345 x 320 x 560 mm, with & including cast copper alloy, half or full threaded chromium plated waste coupling suitable for & including 32 mm size PVC waste/discharge pipe, rag bolts, IN REPAIRS, complete all as specified. |
| 71 | 150 mm size overhead ABS shower with cast copper alloy chromium plated arm 225 mm long with flange and fixed in position, IN REPAIRS, complete all as specified. |
| 72 | Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connection IN REPAIRS, complete all as specified. |
| 73 | Bracket for Health faucet / hand shower , IN REPAIR complete |
| 74 | Looking mirror 600 x 450 mm, selected quality glass 6 mm thick, mounted on PVC ply not less than 4 mm thick, and provision of PVC frame alround fixed with chromium plated brass screws and rawl plugs, IN REPAIRS, complete. |
| 75 | Looking mirror 900 x 600 mm, selected quality glass 6 mm thick, mounted on PVC ply not less than 4 mm thick, and provision of PVC frame alround fixed with chromium plated brass screws and rawl plugs, IN REPAIRS, complete. |
| 76 | Bathroom mirror Cabinet (PTMT alloy) of size 622 x 422 mm with SS screws and fixed in position, IN REPAIRS, complete. |
| 77 | Sheet glass shelf assembly consisting of 5.5mm thick & 12cm wide with chromium plated bracket guard and railing 60 cm long, IN REPAIRS, complete. |
| 78 | Stainless steel towel ring outer dia 180 mm fixed to wall with SS screws and PVC rawl plugs, IN REPAIRS, complete. |
| 79 | Glass corner shelve 3/8 inch thick 10 inch quarter round tempered galss and fixing with SS braket complete |
| 80 | Stainless steel wall mounted towel rack 600 mm long with hook complete. |
| 81 | CP hand shower 90 mm dia with 125 mm long arm including wall hook and 1.5 mm hose complete |
| 82 | Stainless steel shower arm , IN REPAIR complete |
| 83 | Brass chromium plated towel rail 20mm dia D type & 500-600 mm long, fixed to wall with SS screws and PVC rawl plugs, IN REPAIRS, complete. |
| 84 | Stainless steel round slotted grating with with hole , 100-125 mm size fixed in position with cement joints, IN REPAIR, complete all as specified. |
| 85 | Stainless steel round slotted grating with without hole , 100-125 mm size fixed in position with cement joints, IN REPAIR, complete all as specified. |
| 86 | Stainless steel soap dish, fixed to wall with SS screws and PVC rawl plugs, IN REPAIRS, complete. |
| 87 | Liquid soup container PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 90 grams ),IN REPAIRS complete. |
| 88 | Seat cover for pedestal pan , plastic water closet seat, black pattern with flat bottom and cover and mild steel chromium plated or aluminsed hinging device complete |
| 89 | Toilet paper holder, brass chromium plated body IN REPAIRS, complete all as specified |
| 90 | Flush pipe of polyethelene of low or high density or PVC 32 mm dia for low level cistern all as specified and directed. |
| 91 | 32 mm dia waste fittings, brass chromium plated for stainless steel sinks, basins etc. with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed, IN REPAIRS, complete all as specified. |
| 92 | 40 mm dia waste fittings, brass chromium plated for stainless steel sinks, basins etc. with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed, IN REPAIRS, complete all as specified. |
| 93 | Gun metal globe/gate valve, 20mm dia with iron wheel head, ISI marked (IS:9890), screwed both ends for GI tubes, IN REPLACEMENT, complete all as specified |
| 94 | PVC connections 15 mm size of length 600 mm with PTMT nuts, IN REPAIRS, complete all as specified. |
| 95 | Stainless steel (SS-304) sink made out of 1.00mm thick sheet for kitchen or laboratory with plug waste pipe washers with & including bedding in cement mortar to dwarf walls or including cantilever cast iron brackets connecting union etc overall size 495 mm x 420mm with bowl size 410mm x 330mm x 160mm, IN REPLACEMENT, complete all as specified. |
| 96 | Stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen or laboratory with plug waste pipe washers with & including bedding in cement mortar to dwarf walls or including cantilever cast iron brackets connecting union etc overall size 940mm x 460mm x 203mm with bowl size 405mm x 354mm x 203mm, IN REPLACEMENT, complete all as specified |
| 97 | Waste pipe 25 mm dia and 90 cm long , IN REPAIRS Complete all as specified |
| 98 | uPVC pipes 110 mm external dia, type-B, ISI marked (IS:13592) single socketed in any length with or without rubber ring joints, fixed under floors/walls as SWR pipes, IN REPAIRS, complete all as specified. |
| 99 | uPVC pipes 110 mm external dia, type-B, ISI marked (IS:13592) double socketed in any length with or without rubber ring joints, fixed under floors/walls as SWR pipes, IN REPAIRS, complete all as specified. |
| 100 | uPVC/PVC bend with access door any radius, suitable for uPVC soil waste discharge pipes 110 mm external dia, IN REPAIRS, complete all as specified. |
| 101 | uPVC/PVC branch pieces, junction (single T) equal or unequal, with access door complete all as specified. suitable for uPVC soil waste discharge pipes 110 mm external dia, IN REPAIRS, complete all as specified. |
| 102 | uPVC/PVC branch pieces, junction (single Y) equal or unequal, with access door complete all as specified. suitable for uPVC soil waste discharge pipes 110 mm external dia, IN REPAIRS, complete all as specified. |
| 103 | uPVC/ PVC floor trap, suitable for uPVC soil waste discharge pipes 75 mm external dia,embedded in PCC type B-1(1:2:4), IN REPAIRS, complete all as specified, |
| 104 | uPVC/ PVC gully trap, suitable for uPVC soil waste discharge pipes 125/110 mm external dia,embedded in PCC type B-1(1:2:4), IN REPAIRS, complete all as specified, |
| 105 | Demolition and Dismantling work |
| 106 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sq.m each and removing from site all as specified. |
| 107 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sq.m but not exceeding 4.00 Sq.m each and removing from site all as specified. |
| 108 | Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removing from site all as specified. |
| 109 | Taking down shutters of any description not exceeding 1.00 sqm each and and removing from site all as specified. |
| 110 | Taking down cement plaster of any description on brick walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified. |
| 111 | Dismantling asbestos cement (corrugated, semi corrugated etc) sheet in roof covering complete all as specified. |
| 112 | Dismantling boarding any description & fixed in any position complete all as specified. |
| 113 | Dismantling wall and ceiling boards (fibre, pulp, gypsum, POP, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified. |
| 114 | Dismantling wrought iron or mild steel work of any description, complete all as specified. |
| 115 | Dismantling timber scantling 40 Sq.cm and over in section in any position of framed work complete all as specified. |
| 116 | Note : Amount of credit for retrieved materials is mentioned in Sch of credit of tender documents in pdf form which will be deducted while acceptance of tender offline. Please Enable Macros to View BoQ information |
