|
| 1 | Design, Drawing, Supply, and Installation of 8-10 Feet High 5 Pandav (Yadhisthar, Bheem, Arjun, Nakul, Sehdev) Statue Holding the Constitution Book in Hand,made by Frp Statue Including Foundation, Transportation, and On-Site Installation as per Approved Design and Specifications.\\" |
| 2 | Design, Drawing, Supply, and Installation of 8-10 Feet High Karna Statue Holding the Bow and Arrow ,made by Frp Statue Including Foundation, Transportation, and On-Site Installation as per Approved Design and Specifications.\\" |
| 3 | Design, Drawing, Supply, and Installation of 8-10 Feet High Shree Krina Statue Holding the Sudarshan Chakr ,made by Frp Statue Including Foundation, Transportation, and On-Site Installation as per Approved Design and Specifications.\\" |
| 4 | Design, Drawing, Supply, and Installation of Illustrated Stone Sculpture with precision CNC cutting and detailed hand-crafted finishing. |
| 5 | Street Lamp with 4 Directional Light Throw with 65W 4000K Lumins Light Source - SS-304 Built Steel with 4mm Thickness - Jali Architecture Panel Integrated with Ambient Light |
| 6 | Design, Supply, and Installation of Decorative Light Stone Cut Fixture with 65W power consumption and 4000K color temperature. The fixture shall provide high luminous efficacy with uniform light distribution. Complete with durable housing, wiring, and necessary accessories for long-lasting performance. |
| 7 | Construction of the Pole Plinth Size 1400mm55mm 55mm including RCC Concrete M-24, 12mm Dia Steel and 1.5M Long, 8 Nos @ 50mm*500mm Ring 8mm Dia Steel, 200mm C/C Including All Complete |
| 8 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required., 2 X 2.5 sq. mm + 1X2.5 sq. mm earth wire |
| 9 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc., 16 sq. mm 4 core |
| 10 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required., 63 mm dia (CD-63 mm & ID-51 mm nominal) |
| 11 | Supplying, installing, testing and commissioning of following capacity TPN distribution tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with HRC fuses, interconnections, earthing etc. as required., 32 A TPN, 4 way |
| 12 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge., 16 sq. mm |
| 13 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required., Single pole |
| 14 | STREET LIGHT LUMINAIRES Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect., CAT- AAA |
| 15 | supply and installation of Spot light 18w |
| 16 | supply and installation of High beem light 50w |
| 17 | Supply, Installation, Testing & Commissioning of 11/0.433 KV. 50Hz, 3 Phase 250 KVA copper wound outdoor type oil filled air cooled DYN-11 Vector group Transformer complete as per UPPCL Approved make & Specifications with all accessories such as Breather Temp meter Bucholz relay in all respect. as per direction of engineer in charge. |
| 18 | MAIN SPEAKER:- Two Way Coaxial weatherised Line Array speaker designed to meet IP56 standards with 1 x 15\\" LF Driver (3\\" VC) , 1.4\\" Exit HF Driver (3\\"VC), Power Handling min. 1000W. Dispersion - Array defined. Sensitivity 103db, Max SPL 136db, Fully Weatherized Outdoor UV resistant cabinet with aluminium/ Stainless steel grille and OEM Array frames. Make:- VAL audio/JBL / Martin Audio / d&b audiotechnic |
| 19 | SUBWOOFER:- Dual 18\\" Subwoofer with min 2400W RMS, Nominal impedance: 4 ohms, Frequency response : 34Hz - 1500KHz, Sensitivity : 100dB , Max SPL: 139dB peak, Exterior grade Birch Plywood Heavily braced with Tongue & Groove, Textured Waterborne Black coating Acoustic PU foam behind Front grill 6 pcs Make- VAL audio/JBL / Martin Audio /CELTO Acoustique/ d&b audiotechnic |
| 20 | ENCLOSURE FOR SUBWOOFER:- Weatherproof MS enclosure for dual 18\\" subwoofer, fabricated using 2 mm CRCA sheet reinforced to avoid resonance, internally insulated using vibration free 25mm XLPE sheets, canopy on top to further prevent water ingress, protective perforated front grille with internal reticulated foam, seven times processed powdered coated paint |
| 21 | AMPLIFIER FOR MAIN & SURROUND SPEAKER:- High performance 4 channel class H power amplifier in 2U frame, 4x800W @8 ohm, 4x1250W @4 ohm, useable as 4/3/2 ch amplifier, heavy duty Toroidal PSU, comprehensive protection circuitry. Make- VAL audio/JBL / Martin Audio /CELTO Acoustique/ d&b audiotechnic |
| 22 | AMPLIFIER FOR SUBWOOFER:- High performance 2 channel class D power amplifier in 2U frame, 2x2000W @8 ohm, 2x3500W @4 ohm, heavy duty. Make- VAL audio/JBL / Martin Audio /CELTO Acoustique/ d&b audio technic |
| 23 | CONTROL ROOM SPEAKER:- Two-Way Indoor / Outdoor Surface Mount Loudspeaker, LF 6.5\\", Power handling 60W RMS, 120W Program, 240WPeak, Frequency response : 65Hz - 20KHz, Sensitivity : 89dB , Max SPL :114dB peak, 70/100V Transformer taps, black colour, Weatherised ABS cabinet designed to meet IP55 standards, U bracket included. Make- VAL audio/JBL / Martin Audio /CELTO Acoustique/ d&b audiotechnic |
| 24 | MIXER AMPLIFIER:- Mixer amplifier total output power 120W : 4-16 ohm or 70V/100V operation, Bluetooth/USB/FM radio media player, 3 Aux and 2 microphone inputs, toroidal transformer. Make- VAL audio/JBL / Martin Audio /CELTO Acoustique/ d&b audiotechnic |
| 25 | Supply of DLP Laser Phosphor projector Min. 20,000 ISO Lumens with complete dust protection as per IP60 standards, Dual laser for highly accurate colours and saturated & realistic images, Laser light source having 20,000 hrs. life, WUXGA (1920 x 1200) display resolution, Contrast ratio(Dynamic) min.10,000:1, 24 x 7 operation, Colour Correction seven points, PC 3D ready, Anamorphic ready,10,000:1, 24 x 7 operation, Colour Correction seven points, PC 3D ready, Anamorphic ready,Filterless operation with liquid cooled technology, PC configurable OEM software for control & monitoring of projector from control room. Inputs: 2 x Display port, 2 x HDMI , 1 x HDBaseT, 3G-SDI in/out Controls: 3D sync in/out, RS232, Control: Crestron RoomView,Lens Suitable as per site.Approved Makes: Digital Projection, NEC, Panasonic |
| 26 | SITC of IP65 rated Animation Laser with 20W Laser Diaode( RGB) complete with Scanner, Control modes, cards, Laser Scanner control and Diadod control software. The Product muct be certified by NABL. |
| 27 | SITC IP65 rated Weather Proof Moving Head with Lux Level @50m < 75000 LUX, Angle: Narrow Beam Min.1° , Display On board control, Pan/Tilt rotation : 540°/270°（8-16bit) , Gobos wheel ,Gobo- flow effect, Colors : One color wheel(9 dichroic- filters+white,Rainbow-flow effect) , Prism : 8+16 facet prism The Product muct be certified by NABL. |
| 28 | SITC Vandal Resistant Enclosures for protection of Animation Lasers & Moving Heads Lights Approved by OEM |
| 29 | SITC Signal Amplifier and Splitter : 8 Channel , Supports RDM and DMX 512, IP20, Tray Mounting Available. |
| 30 | SITC of stand alone DMX Controller with 4 DMX universes. controller of different DMX system from RGB/RGBW to more advanced moving and color mixing luminaries. The dual channel DMX 512 controller including RTC/calendar, Ethernet facilities, dry contact port triggering, multi zone programming etc. |
| 31 | SITC of DMX Cables Finolex/ D-Link/Kramer/ Krystal |
| 32 | SITC of Connectors |
| 33 | SITC of 3 Core 1.5 Sq mm power cables. |
| 34 | SITC of 1\\" Conduit pipe |
| 35 | Installation, Testing, commissioning and programming of DMX Lighting and laser. Complete with all necessary software. |
| 36 | Supply of Equipment Rack - 19 \\" standard Rack with all required accessories. Earthing community kit, mounting bracket, cable manager, support angle, equipment shelf, mounting hardware, fan housing units etc, Ventilated top and bottom covers with attractive styling. It has Removable side panels with slam latches for easy access. |
| 37 | Supply of Video Transmitter and Receiver Set Max Data Rate 10.2 Gbps, Resolution Range Up to 2560x1600* @ 60 Hz or 4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz, Low power comsumption, compliances CE, c-UL UL, CE**, C-tick, FCC Class A**, ICES Makes: Kramer/ Extron/ Lightware |
| 38 | Supply of Network Switch- |
| 39 | Cables |
| 40 | Connectors and other accessories |
| 41 | SUPPLY OF HDMI PATCH CORDS 1.8 MM |
| 42 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :, 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 43 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:, Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 44 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level., Mild steel and Medium Tensile steel bars |
| 45 | 15 mm cement plaster on the rough side of single or half brick wall of mix :, 1:4 (1 cement: 4 fine sand) |
| 46 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:, New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 47 | Chain link fencing 1.8m with CC post & coping |
| 48 | Bottle palm ht. 270-300 cm bottom girth 40-50 cm well developed in big HDPE bag |
| 49 | Washingtonia filifea palm stem ht. 120-135 cm with 8-10 healthy leaves lush green leaves well developed in big size HDPE Bag |
| 50 | Areca Palm having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot /Plastic pot. |
| 51 | Foxtail palm ht. 240-270 cm bottom girth 35-40 cm well developed in big size HDPE bag |
| 52 | Seaforthia Palm having ht. 1.20 m. to 1.50 m. with 8-10 suckers, well developed, fresh and healthy lush green leaves from bottom to top in 25 cm size of Earthen pot / Plastic pot. |
| 53 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge., All kinds of soil |
| 54 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 55 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 56 | Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer in-Charge., 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern. |
| 57 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :, 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 58 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :, 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 59 | Operation and maitenance for pandav park (39669809.49 x 0.50) |
| 60 | Operation and maitenance for pandav park (39669809.49 x 2.50) for 2nd years |
| 61 | Operation and maitenance for pandav park (39669809.49 x 5.00) Please Enable Macros to View BoQ information |
