Tender For Repair To Roof Flooring And Ceiling Works At Pedong Algarah Dalapchand Ap Algarah And Teesta Tcp Under Ge 867 Ews
Tender Value
33.50 Lakhs
Estimated cost
Bid Submission
10 Jul 2026
0 days left
EMD
67000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pedong → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Roof Flooring And Ceiling Works At Pedong Algarah Dalapchand Ap Algarah And Teesta Tcp Under Ge 867 Ews
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 03-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 10-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and directed. |
| 2 | S & F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275. Complete all as specified and as directed. |
| 3 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 4 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 5 | S & F 0.63mm thickness plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 as specified. |
| 6 | S & F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed. |
| 7 | Dismantling wrought iron or mild steel work of any description complete all as specified and as directed. |
| 8 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channelor flat sections) including distance pieces, cleats etc. confirming Fe 410-W (Gde E- 250) quality A all as specified and as directed. |
| 9 | S & F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 10 | M & L for preparing new steel surfaces of any description exc10cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 11 | S&F in repair 1mm thick mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges complete all as specified and as directed. |
| 12 | dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 13 | S&F Plywood 4mm thick 3 no of ply, grade BWR, type BB, fixed with nails to timber frame work complete all as specified and as directed. |
| 14 | S&F Plywood 6mm thick 5 no of ply, grade BWR, type BB, fixed with nails to timber frame work complete all as specified and as directed. |
| 15 | S&F 605 X605 mm GI frame work for for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sorrounding wall using nylon sleeves and screws at 450 mm centre to centre /intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from suffit at approx 900 mm centre to centre with GI cleats and steel expansion fastner with and including ceiling section (not exc 1.2 m length)of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10 .5 mm fixed to the intermediate channel with connecting clieats across the intermediate channel at 457 mm centre to centre complete all as specified and as directed. |
| 16 | S&F PVC 10 mm thick insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling/wall grid made of aluminium /G.I/M.S as per specification and drawing complete all as specified and as directed. |
| 17 | S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5mm dia 40mm long complete all as specified and as directed. |
| 18 | M&L 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified. |
| 19 | M&L three coats of white wash on AC board complete all as specified and directed. |
| 20 | S & F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing. |
| 21 | S&F 19/20 mm thick pre laminated interior grade both side laminated fixed with nails to timber frame complete all as specified and as directed. |
| 22 | S&F 2nd class hard wood plain fillets sectional area exc 6 but n.exc 13 sqcm square, rectangular or triangular in section, clean sawn, securedwith nails or brads complete all as specified and as directed. |
| 23 | M&L preparation of newly wooden surfaces of any description exc 10cm in width or girth and applying two coats of synthetic enamel paint of first quality over one coat of pink primer complete all as specified and as directed. |
| 24 | M&L preparation of newly wooden Surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint and applying two coats of synthetic enamel paint of first quality over one coat of pink primer complete all as specified and as directed. |
| 25 | Dismantling timber scantlings 40 sq. cm and over in section, in any position in unframed work complete all as specified and as directed. |
| 26 | M & L 2nd class hard wood in scantling fixed in clean sawn complete all as specified and as directed. |
| 27 | Fixing only 2nd class hard wood in scantling fixed in clean sawn complete all as specified and as directed. (NOTE : Material will be used retrived quantities item no. 25) |
| 28 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 29 | M&L Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in cement mortar (1:6) in flooring complete all as specified and as directed. |
| 30 | M & L Glazed coloured ceramic tiles in vertical surface 300x200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10mm thick backing coat in cement mortar (1:3) as dados/skirting complete all as specified and as directed. |
| 31 | M & L Glazed coloured ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10mm thick backing coat in cement mortar (1:3) as dados/skirting complete all as specified and as directed. |
| 32 | M&L non-skid colured ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in cement mortar (1:6) in flooring complete all as specified and as directed. |
| 33 | All as per item No 32 here in before but on vertical surfaces over and including 10 mm thick back coat in cement mortar (1:3) complete all as specified and as directed. |
| 34 | M&L virified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in cement plaster (1:6) in flooring complete all as specified and as directed. |
| 35 | All as per item No.34 here in before but on vertical surfaces over and including 10 mm thick back coat in cement plaster (1:3) complete all as specified and as directed. |
| 36 | M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite over screed bed or bedding layer of mortar 20 mm thick in cement paster (1:4) complete all as specified and directed. |
| 37 | M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over screed bed or bedding layer of mortar 15 mm thick in cement paster (1:4) complete all as specified and directed. |
| 38 | M & L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurrymixed with pigment to match the shade of the slab including rubbing and polishing complete over bedding layer of mortar 10mm thick in cement paster (1:3) complete all as specified and directed. |
| 39 | M&L 25 mm thick Plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floors finished even and smooth using extra cement all as specified. |
| 40 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)complete all as specified and as directed. |
| 41 | M&L for 75mm thick cement concrete type D- 2, (1:4:8) (40mm graded aggregate) as in sub base to floors complete all as specified and as directed. |
| 42 | M&L 40 mm thick cement concrete type B-1, (1:2:4) (20mm graded aggregate) as in floors finished even and smooth using extra cement all as specified. |
| 43 | M&L for 75mm thick cement concrete type B- 2, (1:2:4) (40mm graded aggregate) as in plinth protection, path/steps complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 44 | M&L for 75mm thick cement concrete type B- 2, (1:2:4) (40mm graded aggregate) as in plinth protection, path/steps complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 10, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender