Tender For Provision Of Genral Store And Allied Works At Smc 25 Ed Afs Deolali.
Tender Value
25.80 Lakhs
Estimated cost
Bid Submission
09 Jul 2026
1 days left
EMD
51600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
GE AF OJHAR → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Genral Store And Allied Works At Smc 25 Ed Afs Deolali.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-Jun-2026 | BOQ CORRIGENDUM | BOQ | 27-Jun-2026 |
| 2 | 27-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-Jul-2026 |
| 3 | 04-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing not exc 15cm deep in soft/loose soil. |
| 2 | Surface excavation averaging 15cm deep and n.exc 30cm deep and getting out in hard / dense soil complete all as specified and directed |
| 3 | Clearing the site by grubbing of tree stumps/trunks, roots, vegetation, bushes, shrubs, and organic matter from the ground surface, including complete cleaning and disposal of excavated/unwanted material outside MD land complete all as directed. the site limits |
| 4 | Excavation over areas not exc 1.5m deep and getting out in hard/dense soil complete all as specified and as directed |
| 5 | Excavation in trenches and not exe. 1.5 m wide and not exe. 1.5 m in depth for foundation of drain, man hole , laying of UG cables etc. not exe. 10 Sq. m on plan and not exe. 1.5 m depth and getting out in soft / loose soil complete all as specified and directed. |
| 6 | All same as per item No 5 here-in-above but excavation in hard/dense soil -do - |
| 7 | Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soil complete all as specified and directed. |
| 8 | Removal of excavated soil/ material to a distance not exc 250 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified |
| 9 | Removing excavated surplus soil to a distance exceeding 500 mts and depositing where directed .at a level not exceeding 1.5 M above the starting point complete all as directed |
| 10 | M&L for anti-termite treatment to the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured) complete all as specified & as directed |
| 11 | M&L for anti-termite treatment to the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified & as directed |
| 12 | M&L for anti-termite treatment to the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified & as directed |
| 13 | M&L for anti-termite treatment to the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified & as directed |
| 14 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers not exc 15 cm thick spread, leveled and rammed including watering complete all as specified. |
| 15 | M & L for Hard core of broken hard stone or boulders of guage not exceeding 63 mm , deposited spread as subbase to inter locking tiles in layers n.exc 15cm thick , watered & well rammed to true surface complete all as specified and directed. |
| 16 | M & L for PCC 1 :4 : 8 type D2 using 40 mm graded crushed stone aggregate as in foundation filling mass concrete complete all as specified and directed. |
| 17 | M & L for PCC 1 :3 : 6 type C2 using 40 mm graded crushed stone aggregate as in foundation filling mass concrete complete all as specified and directed. |
| 18 | M&L for cement concrete (1:3:6) type C1 using 20 mm graded crushed stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement. Note : Forming fair finished channel for drain using extra cement shall be measured and paid for separately. |
| 19 | M&L for PCC 1:2:4 type B0 using 12.5 mm graded crushed stone aggregate in padding to roof finished laid to required slope as ordered complete all as specified and directed |
| 20 | Providing precast ce- ment concrete Type C1 1:3 :6 using 20 mm graded crushed stone aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry),string courses, copings. kneelers, apex stones, pier caps, columns, posts , boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets,etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match Set in cement mortar 1:4 complete all as directed. |
| 21 | M&L for precast RCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for man holes, drains etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including placing in position and set in CM (1:6) complete all as specified & as directed.Note :- Reinforcement shall be measured and paid for separately. |
| 22 | M&L for reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregate in foundation , footings , foundation beams , plinth beams , base of columns etc complete all as directed. |
| 23 | All same as per item No 22 here-in-above but as in columns, pillars, piers, posts, struts and the like -do - |
| 24 | All same as per item No 22 here-in-above but as in Beams, cantilevers, bressummers, lintels over 1.5m span etc -do- |
| 25 | All same as per item No 22 here-in-above but as in slabs supported on walls etc -do- |
| 26 | All same as per item No 22 here-in-above but as in chajjas -do- Note for item No 22 to 26 :- Reinforcement & formwork shall be measured and paid for separately |
| 27 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc. |
| 28 | Supply only Integral Water Proofing Compound (ISI Marked) of Make : CICO, Acco Proof, Impermo, Aqua flex as approved. |
| 29 | M&L for brick work with old size factory moulded Fly Ash bricks having minimum compressive strength of 7.5 N/Sqmm, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:4 complete all as specified. |
| 30 | M&L for Brick work with well burnt best quality locally available bricks, old size bricks, straight or curved on plan to any radius built in any description in cement mortar 1:6 complete all as directed |
| 31 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished flat surfaces of concrete |
| 32 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal for rough finished flat surfaces of concrete |
| 33 | Formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete. |
| 34 | Form work to rough finished surface of sides and soffits of suspended slabs such as roof slabs, floor slabs, landings, chajjas and similar work; not exceeding 200mm thick (Horizontal or sloping) |
| 35 | Formwork to flat surfaces of chajjas, chullah hoods, troughs and similar items including edges for rough finished surfaces. |
| 36 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon- tal or sloping and similar work exc 10cm but n exc 20cm wide. |
| 37 | S&F for 20 mm thick Modular door shutter of MDF factory made finished with self closing hinges (02 Nos) , Powder coated handle 75 mm size (02 Nos /leaf) , magnetic lock (01 Pair) etc for ward robe / cupboard etc complate all as directed. |
| 38 | S&F for 28 -30 mm thick Prelaminated Flush WPC factory made 100% solid door (cinforming as per IS -4020 ) made from 100% lead free single extruded side with wood grain texture with density not less than 650 Kg/Cum manufactured by ISO 9001-2015 certified company . The door should be water proof , termite proof , fire etardant & having screw holding capacity complate all as directed. |
| 39 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 40 | S&F100 mm size butt hinges, extruded stainless steel hinge pin anodised and fixed B-21 . |
| 41 | S & F200 mm long stainless steel , barrel tower bolt (ISI marked) of extruded section and fixed. |
| 42 | S&F 150 mm size stainless steel handles (ISI Marked) fabricated type anodised and fixed. |
| 43 | S&F 250 mm long atainless steel , anodised sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section and fixed. |
| 44 | S&F hasp and staple of size 100mm aluminium anodized safety type with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified. |
| 45 | S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws complete all as specified and as directed |
| 46 | S&F rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, necessary welding etc. conforming to Grade E-250 quality ‘A’ all as specified and as directed. |
| 47 | S&F 10 mm dia and over TMT bars cut to length bent to shape required cranking including bending , hooking ends etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 48 | S&F 6 to 8 mm dia and over TMT bars cut to length bent to shape required cranking including bending , hooking ends etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 49 | All as per serial item No. 48 here-in-before but 6 to 8mm dia as in striupps , spacers & binders etc |
| 50 | S&F mild steel framed work as in grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors and similar work including welding conforming to Grade E-165 (Fe 290), complete, all as specified & directed |
| 51 | S&F powder coated aluminium frame for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed. |
| 52 | S&F anodized aluminium door shutters, aluminium section weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc. complete all as specified & as directed. |
| 53 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples complete all as directed. |
| 54 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed. Please Enable Macros to View BoQ information |
| 55 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 27, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 04, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 09, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayJul 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender