|
| 1 | Earthwork in excavation by manual means in trenches for a foundation, drains, pipes, cables etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out excavated earth and disposal of surplus excavated earth as directed: All Kinds of Soil. |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil. |
| 3 | Providing and fixing G.I. pipes complete with G.I fittings excluding trenching and refilling etc. (external work) |
| 4 | 80 mm dia nominal bore |
| 5 | 65 mm dia nominal bore |
| 6 | 50 mm dia nominal bore |
| 7 | 40 mm dia nominal bore |
| 8 | 25 mm dia nominal bore |
| 9 | 20 mm dia nominal bore |
| 10 | Dismantling manually/ mechanically including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: Bituminous road. |
| 11 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles above 25mm & upto 40 mm. |
| 12 | Making connection of GI distribution branch with GI main of following sizes by providing & fixing Tee including cutting threading the pipe etc. complete |
| 13 | 25 to 40 mm dia nominal bore |
| 14 | 15 to 20 mm dia nominal bore |
| 15 | Providing and fixing gun metal gate valve of approved quality. |
| 16 | 50 mm nominal bore |
| 17 | 40 mm nominal bore |
| 18 | 25 mm nominal bore |
| 19 | 20 mm nominal bore |
| 20 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming & watering, lead upto 50m & lift upto 1.5 m. |
| 21 | Providing and fixing of GI pipe fittings of ISI/reputed make to be arranged by the contractor as per site requirement. |
| 22 | Union GI ISI mark |
| 23 | 80mm dia |
| 24 | 65mm dia |
| 25 | 50mm dia |
| 26 | 40mm dia |
| 27 | 25mm dia |
| 28 | 20mm dia |
| 29 | ELBOW/REDUCER ELBOW G.I (ISI mark) |
| 30 | 80mm dia |
| 31 | 65mm dia |
| 32 | 50mm dia |
| 33 | 40mm dia |
| 34 | 25mm dia |
| 35 | 20mm dia |
| 36 | NIPPLE OF ISI mark (per inch) |
| 37 | 80mm dia |
| 38 | 65mm dia |
| 39 | 50mm dia |
| 40 | 40mm dia |
| 41 | 25mm dia |
| 42 | 20mm dia |
| 43 | EQUAL TEE/UN EQUAL TEE G.I |
| 44 | 80mm dia |
| 45 | 65mm dia |
| 46 | 50mm dia |
| 47 | 40mm dia |
| 48 | 25mm dia |
| 49 | 20mm dia |
| 50 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) |
| 51 | Manufacturing/fabricating/providing/fixing of M.S fittings viz bends tees, collars, etc made out of M.S plates of required thickness including the cost of lead caulking etc. The work should be leakproof and should be painted with anticorrosive red oxide primer and bituminous paint complete. The job is to be paid in fitted and finished from and is to be carried out as per the directions of site in charge |
| 52 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 53 | Providing and fixing 80 mm dia nominal bore gun metal non-return valve of approved quality (screwed end) |
| 54 | Carraiages of material from different sources up to actual site of work including loading unloading and stacking complete. |
| 55 | Cement for an Avg. lead of 05 Km. |
| 56 | Sand/Agg. for an Avg Lead of 10 Km. Please Enable Macros to View BoQ information |
