Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | 1). Removal of existing unserviceable/broken wooden part from furniture article carefully without disturbing the adjoining parts. Supply and fixing new parts as per given specification and drg after tightening the joints by pinning, screwing, nailing, wedging, glueing, providing hinges, placing every part intact including polishing the entire articles with standard workmanship and as directed by GE. All furniture items is to be poilshed only after making the entire item intact by tightening the joints.2). Work will be executed inside BS Yard of GE Nagrota and at various sites as per requirement.3). All Timber shall be of 1st class fully seasoned hard teak wood free from knots and cracks.4). Ply shall be BWR Grade-AA of approved make/brand and shall confirm to IS-303. 5). All other material to be incorporated in the work shall be of latest IS standard specification. |
| 2 | SOFA SET 5 SEATER, (3+1+1) FD-281 |
| 3 | Removing old, supply and fixing new leg of size 70mm x 35mm x 515mm made of 1st class teak wood using screws only with proper workmanship complete all as specified and directed & as shown on drawing. |
| 4 | Removing old ,supply and fixing new arm of size 70mmx35mmx745mm made of 1st class teak wood using screws only with proper workmanship complete all as specified and directed & as shown on drawing. |
| 5 | Removing old ,supply and fixing new batten of size 50mmx20mmx585mm made of 1st class teak wood using screws only with proper workmanship complete all as specified and directed & as shown on drawing. |
| 6 | Removing old ,supply and fixing new front long rail of three seater size 100mmx35mmx1630mm made of 1st class teak wood using screws only with proper workmanship complete all as specified and directed & as shown on drawing. |
| 7 | Removing old ,supply and fixing new front long rail of single seater size 100mmx35mmx570mm made of 1st class teak wood using screws only with proper workmanship complete all as specified and directed & as shown on drawing. |
| 8 | Removing old ,supply and fixing new short rail of size 100mmx35mmx625mm made of 1st class teak wood using screws only with proper workmanship complete all as specified and directed & as shown on drawing. |
| 9 | Removing old ,supply and fixing new long bearer of size 40mmx40mmx1590mm made of 1st class teak wood using screws only with proper workmanship complete all as specified and directed & as shown on drawing. |
| 10 | Removing old ,supply and fixing new short bearer of size 40mmx40mmx530mm made of 1st class teak wood using screws only with proper workmanship complete all as specified and directed & as shown on drawing. |
| 11 | Removing old, supply and fixing new rail to back frame of size 70mmx35mmx1590mm made of 1st class teak wood using screws only with proper workmanship complete all as specified ,shown on drawing and as directed. |
| 12 | Taking out old pressed /torn cushions from each set and Supply of 40 density, 100mm thick PU foam cushion of size 520mmx560mmx100mm duly covered with inner linen cloth and best tapestry cloth not less than Rs 300 per metre and not less than 360 GSM of approved color and shade. Each cushion cover shall be provided with best quality polyester zipper stitched on one edge of cushion cover covered under the flap of cloth with standard fitting complete all as specified and directed. |
| 13 | Scratching the entire wooden pallets of sofa with sand emery paper of various grit , filling the pores with wood filler to make good the surface,After prepartion of surface the entire sofa chair shall be polished in french finish in high gloss with spary machine complete all as specified and directed. |
| 14 | SOFA SET 4 SEATER, (1+1+1+1) FD-281 |
| 15 | Removing old ,supply and fixing new legs of size 70mmx35mmx515mm made of 1st class teak wood using screws only with proper workmanship complete all as specified and directed & as shown on drawing. |
| 16 | Removing old,supply and fixing new arm of size 70mmx35mmx745mm made of 1st class teak wood using screws only with proper workmanship complete all as specified and directed & as shown on drawing. |
| 17 | Removing old ,supply and fixing new battens of size 50mmx20mmx585mm made of 1st class teak wood using screws only with proper workmanship complete all as specified and directed & as shown on drawing. |
| 18 | Removing old, supply and fixing new front rails of size 100mmx35mmx570mm made of 1st class teak wood using screws only with proper workmanship complete all as specified and directed & as shown on drawing. |
| 19 | Removing old, supply and fixing new short rails of size 100mmx35mmx625mm made of 1st class teak wood using screws only with proper workmanship complete all as specified and directed & as shown on drawing. |
| 20 | Removing old ,supply and fixing new bearer of size 40mmx40mmx530mm made of 1st class teak wood using screws only with proper workmanship complete all as specified and directed & as shown on drawing. |
| 21 | Removing old ,supply and fixing new rail to back frame of size 70mmx35mmx530mm made of 1st class teak wood using screws only with proper workmanship complete all as specified and directed & as shown on drawing. |
| 22 | Taking out old pressed /torn cushions from each set and Supply of 40 density ,100mm thick foam cushion of size 520mmx560mmx100mm duly covered with best tapestry cloth not less than Rs 300 per metre and not less than 360 GSM of approved color and shade. Each cushion cover shall be provided with best quality polyester zipper stitched on one edge of cushion cover covered under the flap of cloth with standard fitting complete all as speified and directed. |
| 23 | Scratching the entire wooden pallets of sofa with sand emery paper of various grit , filling the pores with wood filler to make good the surface, After prepartion of surface the entire sofa chair shall be polished in french finish in high gloss with spary machine complete all as specified and directed. |
| 24 | CHAIR EASY CUSHIONED (FD-358 ) |
| 25 | Removing the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 26 | Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 27 | Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 28 | Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 29 | Removing the old unserviceable rail and supply and fixing new rail of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 30 | Supply of wooden brackets made to shape in size 3\\"x 3\\" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails complete all as specfied and directed. |
| 31 | Removing the existing unserviceable seat from the chair, Supply and fixing new seat made of 3mm thick ply over 75mm cushion shall be fixed and duly upholstered with best tapestry cloth not less than Rs 350 per metre and not less than 360 GSM of approved color and shade, complete polishing process complete all as specified and directed & as shown on drawing. |
| 32 | Removing the existing unserviceable back from the chair ,Supply and fixing new back made of 3mm thick ply over 75mm cushion shall be fixed and duly upholstered with best tapestry cloth not less than Rs 350 per metre and not less than 360 GSM of approved color and shade complete polishing process complete all as specified and directed & as shown on drawing. |
| 33 | Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment complete all as specified and directed. |
| 34 | TAPESTRY COVER FOR POLYURETHANE FOAM CUSHIONS FOR 5/4 SEATER (FD-281) |
| 35 | Taking out old torn/ faded cushion cover from old foam cushions and supply and fixing new cushion cover with inner lining cloth to the existing cushion made in size 520mmx560mmx100mm duly covered with best tapestry cloth not less than Rs 350 per metre and not less than 360 GSM of approved color and shade .Each cushion cover shall be provided with best quality polyester zipper stitched on one edge of cushion cover covered under the flap of cloth with standard fitting complete all as specifed and directed. |
| 36 | CHAIR DINING , FD-279,262,228 |
| 37 | Removing the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 38 | Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 39 | Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 40 | Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 41 | Removing the old unserviceable rail and supply and fixing new rail of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 42 | Supply of wooden brackets made to shape in size 3\\"x 3\\" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails complete all as specfied and directed. |
| 43 | Removing the existing unserviceable cane plastic and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide of white colour 1st quality.The border of seat shall weaved with 4mm wide cane.The canning of chairs shall only be carried out after complete polishing process complete all as specified and directed & as shown on drawing. |
| 44 | Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment complete all as specified and directed. |
| 45 | CHAIR DINING JCO/OR , FD/MAP-II/05 |
| 46 | Removing the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 47 | Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 48 | Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 49 | Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 50 | Removing the old unserviceable rail and supply and fixing new rail of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 51 | Supply of wooden brackets made to shape in size 3\\"x 3\\" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails complete all as specfied and directed. |
| 52 | Removing the existing unserviceable PVC seat ,supply and fixing new PVC seat 4mm thick after providing one wooden stiffener at centre of seat frame for support of PVC seat . The PVC seat shall got approved from GE before supply. The PVC seat shall be fied only after painting the chair complete all as specified and directed. |
| 53 | Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment complete all as specified and directed. |
| 54 | CHAIR EASY, FD-229,358 :- |
| 55 | Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 56 | Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 57 | Removing the old unserviceable rail and supply and fixing new rail of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 58 | Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 59 | Removing the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 60 | Removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 61 | Supply of wooden brackets made to shape in size 3\\"x 3\\" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails complete all as specfied and directed. |
| 62 | Removing the existing unserviceable cane plastic and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide of white colour 1st quality.The border of seat and back shall weaved with 4mm wide cane.The canning of chairs shall only be carried out after complete polishing process complete all as specified and directed & as shown on drawing. |
| 63 | Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment complete all as specified and directed. |
| 64 | CHAIR WRITING, FD-261,280,250 |
| 65 | Removing the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 66 | Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 67 | Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 68 | Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 69 | Removing the old unserviceable rail and supply and fixing new rail of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 70 | Removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 71 | Supply of wooden brackets made to shape in size 3\\"x 3\\" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails complete all as specfied and directed. |
| 72 | Removing the existing unserviceable cane plastic and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide of white colour 1st quality.The border of seat shall weaved with 4mm wide cane.The canning of chairs shall only be carried out after complete polishing process complete all as specified and directed & as shown on drawing. |
| 73 | Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment complete all as specified and directed. |
| 74 | CHAIR WOODEN BOTTOM W/O ARM, FD-225 |
| 75 | Removing the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 76 | Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 77 | Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 78 | Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 79 | Removing the old unserviceable rail and supply and fixing new rail of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 80 | Supply of wooden brackets made to shape in size 3\\"x 3\\" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails complete all as specfied and directed. |
| 81 | Removing the existing unserviceable/broken seat of chair without disturbing the adjacent parts ,supply and fixing 6 mm thick one side teak face ply for seat . The seat ply shall be provided with 4mm dia holes 08 in nos at centre and shall be fixed with screws from top complete all as specified and directed. |
| 82 | Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment complete all as specified and directed. |
| 83 | CHAIR DINING LONG BACK , FD/E6/MAP/10 and FD/MAP-II/04 |
| 84 | Removing the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 85 | Removing the old unserviceable Teak wood vertical stiffener and supply and fixing new Teak wood vertical stiffener of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 86 | Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 87 | Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 88 | Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 89 | Supply of wooden brackets made to shape in size 3\\"x 3\\" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails complete all as specfied and directed. |
| 90 | Removal the old unserviceable seat by unscrewing from bottom , Supply and fixing new seat made of 40 density cool foam 75mm thick fixed on 12mm thick BWR plywood duly covered with best quality tapestry cloth of not less than Rs 350 per meters with standard workmanship using white muslin cloth at bottom.The tapestry cloth shall be fixed to bottom ply with pressure hydraulic stapler pins. The seat after upholstery shall be fixed within /over the wooden frame by using black gypsum screws from beneath through corner brackets complete all as specified and directed. |
| 91 | Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment complete all as specified and directed. |
| 92 | BIN LINEN MULTIPURPOSE, FD/E6/MAP/09 |
| 93 | Removing old, S&F new top of size 1200mm x 450mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade complete all as specified and directed & as shown on drawing. |
| 94 | Removing old, S&F new Back of size 1200mm x 675mm made out of 12mm thick BWR plywood fixed with sides and top with adhesive and neadless nails complete all as specified and directed & as shown on drawing. |
| 95 | Removing old, S&F new Door Shutter of size 637mmx400mm made of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick teak wood beading fixed to sides with piano hinge complete all as specified and directed & as shown on drawing. |
| 96 | Removing old, S&F new Door Shutter of size 518mmx400mm made of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick beading of teak wood fixed to sides with piano hinge complete all as specified and directed & as shown on drawing. |
| 97 | Removing old, S&F new Sides of size 637mmx450mm made of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick teak wood beading complete all as specified and directed & as shown on drawing. |
| 98 | Removing old, S&F new Front face of drawer of size 450mmx100mm made of 18mm thick prelaminated MDF board exterior grade of existing shade with top edge duly covered with 4 mm thick teak wood beading complete all as specified and directed & as shown on drawing. |
| 99 | Removing old, S&F new Bottom ply of drawers of size 450mmx400mm made out of 6mm plywood BWR fixed with adhesive and headless nail complete all as specified and directed & as shown on drawing. |
| 100 | Removing old, S&F new Sides of drawers of size 100mmx400mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade with top edge duly covered with 4 mm thick teak wood beading complete all as specified and directed & as shown on drawing. |
| 101 | Removing old, S&F new Handles of size 100mm long 8mm dia chrome plated shall be fixed using internal metal screws complete all as specified and directed. |
| 102 | Removing old, S&F new Magnetic catchers fixed inside shutter with screws complete all as specified and directed & as shown on drawing. |
| 103 | Removing old, S&F new Complete base frame with legs of overall size 1164mmx75mmx20mm made of 1st class teak wood member in lieu of prelaminated MDF board duly fixed by using metal screws and adhesive complete all as specified and directed & as shown on drawing. |
| 104 | Removing old, S&F new Shelf of size 800mmx400mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade with top edge duly covered with 4 mm thick teak wood beading complete all as specified and directed & as shown on drawing. |
| 105 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine complete all as specified and directed. |
| 106 | BOOK CASE SMALL , FD-237 |
| 107 | Removing old, S&F new Top of size 1200mmx300mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood complete all as specified and directed & as shown on drawing. |
| 108 | Removing old, S&F new Sides of size 660mmx300mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood complete all as specified and directed & as shown on drawing. |
| 109 | Removing old, S&F new Base of size 1200mmx300mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood complete all as specified and directed & as shown on drawing. |
| 110 | Removing old, S&F new coBack ply of size 1200mmx660mm BWR 6mm thick fixed with adhesive and headless nails complete all as specified and directed. |
| 111 | Removing old, S&F new Shelves of size 380mmx205mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood complete all as specified and directed & as shown on drawing. |
| 112 | Removing old, S&F new Knob chrome plated 30mm dia complete all as specified and directed. |
| 113 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine complete all as specified and directed. |
| 114 | TABLE DRESSING LADIES , FD-251 |
| 115 | Removing old, S & F new looking mirror of size 1220 x 366mm of thickness 5mm .The back of mirror shall be supported by providing 6mm thick BWR -grade-A complete all as specified and directed & as shown on drawing. |
| 116 | Removing old, S & F new top of size 900mmx368mm to the table dressing ladies made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front complete all as specified and directed & as shown on drawing. |
| 117 | Removing old, S & F new sides of size 300mmx380mm to the table dressing ladies made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front complete all as specified and directed & as shown on drawing. |
| 118 | Removing old, S & F new bottom of size 900mmx368mm to the table dressing ladies made out of 18mm thick BWR-grade-A plywood complete all as specified and directed & as shown on drawing. |
| 119 | Removing old, S & F new back of size 900mmx350mm to the table dressing ladies made out of 12mm thick BWR -grade-A plywood complete all as specified and directed & as shown on drawing. |
| 120 | Removing old,S & F sliding plain glass of 5mm thickness supported on dual run aluminium channel 5mm thick shutters complete all as specified and directed & as shown on drawing. |
| 121 | Removing old, S&F new right hand drawer made out of 18mm thick prelaminated MDF board [ISI Marked] exterior grade duly providing 4mm thick teak wood beading on top and base of 6mm BWR plywood including chrome plated 30mm dia decorative knob to each drawer complete all as specified and directed & as shown on drawing. |
| 122 | Removing old, S & F new long stiffener of size 560mmx40mmx25 mm made out of first class hard wood teak complete all as specified and directed & as shown on drawing. |
| 123 | Removing old,S & Fnew short stiffener of size 140mmx40mmx25 mm made out of first class hard wood teak complete all as specified and directed & as shown on drawing. |
| 124 | Removing old, S & F new legs of size 45 mmx45mm made out of first class hard wood teak complete all as specified and directed & as shown on drawing. |
| 125 | Removing old, S & F new vertical members at back of mirror of size 45mmx40mm made out of teak wood complete all as specified and directed & as shown on drawing. |
| 126 | Polishing to dressing table ladies with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed. |
| 127 | HAT STAND WITH MIRROR, FD-233 |
| 128 | Removing old, S & F new Front teak face plywood 4mm thick of size 1000mmx710mm complete all as specified and directed & as shown on drawing. |
| 129 | Removing old, S & F new Back Commercial plywood 4mm thick of size 1000mmx710mm complete all as specified and directed & as shown on drawing. |
| 130 | Removing old, S & F new Wooden frame member of size 1000mmx20mmx50mm complete all as specified and directed & as shown on drawing. |
| 131 | Removing old, S & F new 5mm thick looking mirror of size 440mmx300mm duly fixed with teak wood beading made out of 10mmx12mm section complete all as specified and directed. |
| 132 | Removing old, S & F new Teak wood beading of size 710mmx35mmx6mm complete all as specified and directed & as shown on drawing. |
| 133 | Removing old, S & F new Teak wood beading of size 1000mmx35mmx6mm complete all as specified and directed & as shown on drawing. |
| 134 | Removing old, S & F new Brass Peg of size 120mm long duly fixed with brass screws complete all as specified and directed & as shown on drawing. |
| 135 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine complete all as specified and directed. |
| 136 | TABLE 3'X2' WITHOUT DRAWER, FD-284 :- |
| 137 | Removing old, S&F new Top of size 900mmx600mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood complete all as specified and directed. |
| 138 | Removing old, S & F new Legs of size 760mmx30mmx60mm made of 1st class teak wood as per size complete all as specified and directed & as shown on drawing. |
| 139 | Removing old, S & F new Top long rail of size 900mmx20mmx60mm made of 1st class teak wood as per sizecomplete all as specified and directed & as shown on drawing. |
| 140 | Removing old, S & F new Top Short rail of size 600x20mmx60mm made of 1st class teak wood as per size complete all as specified and directed & as shown on drawing. |
| 141 | Removing old, S & F new Bottom rail of size 600mmx20mmx60mm made of 1st class teak wood as per size complete all as specified and directed & as shown on drawing. |
| 142 | Removing old, S & F new Centre stiffener of size 900mmx20mmx60mm in between bottom rail irrespective of what is shown in drg ,made of 1st class teak wood complete all as specified and directed. |
| 143 | Corner shape wooden bracket of size 100mmx100mmx20mm shall be fixed to legs and rail with adhesive and screws complete all as specified and directed. |
| 144 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine only complete all as specified and directed. |
| 145 | TABLE 3' X 2' WITH DRAWER, FD-283 :- |
| 146 | Removing old, S&F new Top of size 900mmx600mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood complete all as specified and directed. |
| 147 | Removing old, S&F new Legs of size 760mmx30mmx60mm made of 1st class teak wood as per size complete all as specified and directed & as shown on drawing. |
| 148 | Removing old, S&F new Top long rail of size 900mmx20mmx110mm made of 1st class teak wood as per size complete all as specified and directed & as shown on drawing. |
| 149 | Removing old, S&F new Top Short rail of size 600x20mmx110mm made of 1st class teak wood as per size complete all as specified and directed & as shown on drawing. |
| 150 | Removing old, S&F new Bottom rail of size 600mmx20mmx60mm made of 1st class teak wood irrespective of what is shown in drg ,made of 1st class teak wood as per size complete all as specified and directed & as shown on drawing. |
| 151 | Removing old, S&F new Centre stiffener of size 900mmx20mmx60mm in between bottom rail irrespective of what is shown in drg ,made of 1st class teak wood complete all as specified and directed. |
| 152 | Removing old, S&F new Front facia of drawers of size 100mmx 300mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick beading of teak wood complete all as specified and directed. |
| 153 | Removing old, S&F new Bottom ply of drawers of size 540mmx300mm made out of 6mm plywood BWR fixed to side ply in groove complete all as specified and directed & as shown on drawing. |
| 154 | Removing old, S&F new Sides of drawers of size 100mm x 540mm made out of 12mm thick BWR plywood with edges duly covered with 4 mm thick beading of teak wood complete all as specified and directed. |
| 155 | Corner shape wooden bracket of size 100mmx100mmx20mm shall be fixed to legs and rail with adhesive and screws complete all as specified and directed. |
| 156 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine complete all as specified and directed. |
| 157 | TEAPOY WOODEN, FD-232 & 278 :- |
| 158 | Removing old, S&F new Top of size 600mmx450mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood complete all as specified and directed. |
| 159 | Removing old, S&F new Legs of size 520mmx60mmx30mm made of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 160 | Removing old, S&F new Top long rail of size 600mmx 50mmx20mm made of 1st class teak wood as per sizecomplete all as specified and directed & as shown on drawing. |
| 161 | Removing old, S&F new Bottom rail of size 450mmx50mmx20mm made of 1st class teak wood as per size complete all as specified and directed & as shown on drawing. |
| 162 | Removing old, S&F new Long Stiffener of size 600mmx20mmx50mm in between two bottom rails irrespective of what is shown in drg ,made of 1st class teak wood complete all as specified and directed. |
| 163 | Corner shape wooden bracket of size 75mmx75mmx20mm thick shall be fixed to legs and rail with adhesive and screws complete all as specified and directed. |
| 164 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine complete all as specified and directed. |
| 165 | TABLE CENTRE , FD-274 :- |
| 166 | Removing old, S & F new Top of size 900mmx450mm made out of 18mm thick prelaminated MDF board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood complete all as specified and directed. |
| 167 | Removing old, S & F new Legs of size 400mmx30mmx60mm made of 1st class teak wood as per size complete all as specified and directed & as shown on drawing. |
| 168 | Removing old, S & F new Top long rail of size 900mmx20mmx50mm made of 1st class teak wood as per size complete all as specified and directed & as shown on drawing. |
| 169 | Removing old, S & F new Top short rail of size 450mmx20mmx50mm made of 1st class teak wood as per size complete all as specified and directed & as shown on drawing. |
| 170 | Removing old, S & F new Bottom Rail of size 450mmx20mmx50mm Short Stiffener made of 1st class teak wood as per size complete all as specified and directed & as shown on drawing. |
| 171 | Removing old, S & F new Centre stiffener of size 900mmx20mmx50mm in between bottom rail irrespective of what is shown in drg ,made of 1st class teak wood complete all as specified and directed. |
| 172 | Corner shape wooden bracket of size 75mmx75mmx20mm shall be fixed to legs and rail with adhesive and screws complete all as specified and directed. |
| 173 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine complete all as specified and directed. |
| 174 | TABLE WRITING, FD-275 :- |
| 175 | Removing old, S&F new Top of size 1145mmx600mm made out of 18mm thick prelaminated MDF board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood complete all as specified and directed. |
| 176 | Removing old, S&F new Top Long rail of size 740mmx25mmx50mm made of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 177 | Removing old, S&F new Top Short rail of size 600mmx25mmx50mm made of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 178 | Removing old, S&F new back ply of size 596mmx400mm made of 6mm plywood complete all as specified and directed & as shown on drawing. |
| 179 | Removing old, S&F new Bottom stiffener of size 1145mmx25mmx50mm in between two short stiffeners irrespective of what is shown in drg ,made of 1st class teak wood complete all as specified and directed. |
| 180 | Removing old, S&F new Sides of compartment of size 592mmx600mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick beading of teak wood complete all as specified and directed. |
| 181 | Removing old, S&F new Front face of drawers of size 120mmx370mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick beading of teak wood complete all as specified and directed. |
| 182 | Removing old, S&F new Front face of shutter of size 590mmx600mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick beading of teak wood complete all as specified and directed. |
| 183 | Removing old, S&F new Bottom ply of drawers of size 370mmx540mm made out of 6mm plywood BWR fixed to side ply in groove complete all as specified and directed & as shown on drawing. |
| 184 | Removing old, S&F new Sides of drawers of size 120mmx540mm made out of 12mm thick BWR plywood with edges duly covered with 4 mm thick beading of teak wood complete all as specified and directed. |
| 185 | Removing old, S&F new Legs of size 740mmx35mmx55mm made of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 186 | Removing old, S&F new Handle of size 100mm long chrome plated complete all as specified and directed. |
| 187 | Corner shape wooden bracket of size 100mmx100mmx25mm thick shall be fixed to legs and rail with adhesive and screws complete all as specified and directed. |
| 188 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine complete all as specified and directed. |
| 189 | TABLE BED SIDE, FD-276:- |
| 190 | Removing old, S&F new Top of size 450mmx230mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood complete all as specified and directed. |
| 191 | Removing old, S&F new Sides of size 510mmx 230mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood complete all as specified and directed. |
| 192 | Removing old, S&F new Shelves of size 414mmx224mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood complete all as specified and directed. |
| 193 | Removing old, S&F new Bottom of size 414mmx224mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood complete all as specified and directed. |
| 194 | Removing old, S&F new Back ply of size 392mmx432mm made of 6mm BWR plywood duly fixed with adhesive and headless nails complete all as specified and directed & as shown on drawing. |
| 195 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine complete all as specified and directed. |
| 196 | TABLE PEG , FD-236/277/384:- |
| 197 | Removing old, S&F new Top of size 450mmx300mm made out of 18mm thick prelaminated MDF board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood complete all as specified and directed. |
| 198 | Removing old, S&F new Legs of size 362mmx30mmx50mm made of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 199 | Removing old, S&F new Top long rail of size 450mmx20mmx40mm made of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 200 | Removing old, S&F new Bottom side rail of size 300mmx20mmx40mm made of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 201 | Removing old, S&F new Bottom Stiffener of size 450mmx20mmx40mm in between two short stiffeners irrespective of what is shown in drg ,made of 1st class teak wood complete all as specified and directed. |
| 202 | Corner shape wooden bracket of size 75mmx75mmx20mm shall be fixed to legs and rail with adhesive and screws complete all as specified and directed. |
| 203 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine complete all as specified and directed. |
| 204 | TABLE DINING FOR 6 PERSONS, FD/MAP-II/03:- |
| 205 | Removing old, S&F new Top of size 1500mmx900mm made out of 18mm thick prelaminated MDF board exterior grade,natural teak color, edges duly covered with 4 mm thick beading of teak wood complete all as specified and directed. |
| 206 | Removing old, S&F new Legs of size 705mmx90mmx45mm made of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 207 | Removing old, S&F new Long rail of size 1500x45mmx90mm made of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 208 | Removing old, S&F new Short rail of size 900mmx45mmx90mm made of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 209 | Removing old, S&F new Top stiffeners of size 900mmx25mmx90mm made of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 210 | Corner Shape wooden bracket of size 100mmx100mmx35mm thick shall be fixed to legs and rail with adhesive and screws complete all as specified and directed. |
| 211 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish by spray machine complete all as specified and directed. |
| 212 | TABLE DINING FOR 8 PERSONS, FD/MAP-II/03:- |
| 213 | Removing old, S&F new Top of size 1800mmx900mm made out of 18mm thick prelaminated MDF board exterior grade,natural teak color, edges duly covered with 4 mm thick beading of teak wood complete all as specified and directed. |
| 214 | Removing old, S&F new Legs of size 750mmx90mmx45mm made of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 215 | Removing old, S&F new Long rail of size 1800x45mmx90mm made of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 216 | Removing old, S&F new Short rail of size 900mmx45mmx90mm made of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 217 | Removing old, S&F new Top stiffeners of size 900mmx45mmx90mm made of 1st class teak wood complete all as specified and directed & as shown on drawing. |
| 218 | Corner Shape wooden bracket of size 100mmx100mmx35mm thick shall be fixed to legs and rail with adhesive and screws complete all as specified and directed. |
| 219 | Scratching & making the entire wooden surface of table with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish by spray machine complete all as specified and directed. |
| 220 | TABLE DRESSING GENTS, FD-230 |
| 221 | Removing old, S&F new looking mirror of size 760mm x 380mm with thickness 5mm .The back of mirror shall be supported by providing 6mm thick BWR -grade-A complete all as specified and directed & as shown on drawing. |
| 222 | Removing old, S&F new top of size 900mmx300mm to the table dressing gents made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front complete all as specified and directed & as shown on drawing. |
| 223 | Removing old, S&F new sides of size 150mmx300mm to the table dressing gents made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front complete all as specified and directed & as shown on drawing. |
| 224 | Removing old, S&F new bottom of size 900mmx300mm to the table dressing gents made out of 12mm thick BWR-grade-A plywood complete all as specified and directed & as shown on drawing. |
| 225 | Removing old, S&F new back of size 900mmx150mm to the table dressing gents made out of 12mm thick BWR -grade-A plywood complete all as specified and directed & as shown on drawing. |
| 226 | Removing old, S&F new vertical members at back of mirror of size 35mmx25mm made out of teak wood complete all as specified and directed & as shown on drawing. |
| 227 | Removing old, S&F new drawer made out of 18mm thick prelaminated MDF board [ISI Marked] exterior grade duly providing 4mm thick teak wood beading on top and base of 6mm BWR plywood including chrome plated 30mm dia decorative knob to each drawer complete all as specified and directed & as shown on drawing. |
| 228 | Polishing to dressing table gents with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed. |
| 229 | DRESSING TABLE LADIES MAP (FD/MAP-II/07) :- |
| 230 | Removing old, S&F new looking mirror of required size with thickness 5mm .The back of mirror shall be supported by providing 6mm thick BWR Grade-A complete all as specified and directed & as shown on drawing. |
| 231 | Removing old, S&F new top to side compartments of size made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front complete all as specified and directed & as shown on drawing. |
| 232 | Removing old, S&F new back to table dressing made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front complete all as specified and directed & as shown on drawing. |
| 233 | Removing old, S&F new sides to side compartments made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front complete all as specified and directed & as shown on drawing. |
| 234 | Removing old, S&F new bottom to each side compartments made out of 12mm thick BWR-grade-A plywood complete all as specified and directed & as shown on drawing. |
| 235 | Removing old, S&F new complete drawer to side compartments made out 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front complete all as specified and directed & as shown on drawing. |
| 236 | Removing old, S&F new shutters to side compartments made out 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front complete all as specified and directed & as shown on drawing. |
| 237 | Removing old, S&F new chrome plated handles of size 100mm long to drawer and shutter complete all as specified and directed & as shown on drawing. |
| 238 | Polishing to dressing table with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed. |
| 239 | STOOL OF DRESSING TABLE , FD/MAP-II/07:- |
| 240 | Removing old, S&F new openable shutter to stool made of 12mm thick BWR plywood of grade-A duly fitted with recessed type drawer pull folding handle of size not less than 75mmx37mmx4mm complete all as specified and directed & as shown on drawing. |
| 241 | Removing old, S&F new sides to stool made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging alround complete all as specified and directed & as shown on drawing. |
| 242 | Removing old, S&F new bottom to stool made out of 6mm thick BWR plywood complete all as specified and directed & as shown on drawing. |
| 243 | Removing old, S&F new 50mm dia twin wheel castor wheel of heavy duty duly fixed with 20mm long screw complete all as specified and directed & as shown on drawing. |
| 244 | Removing old, S&F new wooden runners of size 20mmx20mm inside the stool as sown in drg complete all as specified and directed & as shown on drawing. |
| 245 | Removing old, S&F new seat of stool made to shape of 75mm thick 40 density PU foam duly covered with best qulaity tapestry cloth of rate not less than 400 per mtr complete all as specified and directed & as shown on drawing. |
| 246 | Polishing to stool dressing MAP with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed. |
| 247 | SIDE BOARD, FD-241/372 :- |
| 248 | Removing old, S&F new top to Side Board made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front complete all as specified and directed & as shown on drawing. |
| 249 | Removing old, S&F new sides to Side Board made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front complete all as specified and directed & as shown on drawing. |
| 250 | Removing old, S&F new centre partition to Side Board made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front complete all as specified and directed & as shown on drawing. |
| 251 | Removing old, S&F new back to Side Board made out of 6mm thick BWR plywood complete all as specified and directed & as shown on drawing. |
| 252 | Removing old, S&F new shelf to Side Board made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front complete all as specified and directed & as shown on drawing. |
| 253 | Removing old, S&F new sides to drawers made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at top edge complete all as specified and directed & as shown on drawing. |
| 254 | Removing old, S&F new front face of drawer made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at top edge complete all as specified and directed & as shown on drawing. |
| 255 | Removing old, S&F new bottom ply 6mm to drawer made out of 6mm thick BWR plywood including 4mm thick teak wood edging at top edge complete all as specified and directed & as shown on drawing. |
| 256 | Removing old, S&F new drawer to Side Board made of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade with 6mm thick plywood at bottom including 4mm thick teak wood edging at front complete all as specified and directed & as shown on drawing. |
| 257 | Removing old, S&F new leg to base frame of Side Board made out of section 45mmx45mm of teak wood complete all as specified and directed & as shown on drawing. |
| 258 | Removing old, S&F new bottom frame made of 45mmx25mm teak wood members complete all as specified and directed & as shown on drawing. |
| 259 | Removing old, S&F new shutters to Side Board made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front complete all as specified and directed & as shown on drawing. |
| 260 | Removing old, S&F new 30mm dia chrome plated decorative knob to drawer and shutter complete all as specified and directed & as shown on drawing. |
| 261 | Polishing to side board with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed. |
| 262 | MIRROR DRESSING GENTS, FD/E6/MAP/16 :- |
| 263 | Removing old, S&F new looking mirror of required size with thickness 5mm . The back of mirror shall be supported by providing 6mm thick BWR Grade-A complete all as specified and directed & as shown on drawing. |
| 264 | S & F the sides of the mirror dressing gents made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front complete all as specified and directed & as shown on drawing. |
| 265 | S & F the back of the mirror dressing gents made out of 12mm thick BWR plywood of grade-A. complete all as specified and directed & as shown on drawing. |
| 266 | S & F the teak wood frame of the mirror dressing gents for holding the looking mirror in position made of teak wood battens of size 38mmx25mmx1200 mm long section complete all as specified and directed & as shown on drawing. |
| 267 | S & F the decorative beading of size 30mmx15mm x 1200mm long to the mirror dressing gents of teak wood complete all as specified and directed & as shown on drawing. |
| 268 | S & F the shelves of size 100mmx600mm made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front irrespective of what is shown in drg complete all as specified and directed & as shown on drawing. |
| 269 | S & F the teak wood bracket of size 38mmx112mmx112mm complete all as specified and directed & as shown on drawing. |
| 270 | S & F the legs made out of teak wood of size 38mmx38mmx450mm complete all as specified and directed & as shown on drawing. |
| 271 | S & F the magnetic catchers to the shutter complete all as specified and directed & as shown on drawing. |
| 272 | S & F the bolt type wall anchor fasteners (heavy duty with rust proof) of 100mm long x 12 mm dia of approved make to hang the mirror dressing gents on wall with the help of drill machine complete all as specified and directed. |
| 273 | Polishing to mirror dressing gents with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed. |
| 274 | SOFA CHAIR SINGLE SEATER WITH CUSHION (Drg No. TP) :- |
| 275 | Removing old seat material i.e- zig zag upholstery metal springs, tapestry cloth,lining cloth, foam cushion from each seat, S&F new zig zag metal springs of 12 guage, new tapestry cloth of rate not less than 350 per mtr in 560 GSM thickness of approved colour and shade and quality lining cloth, 40 density PU foam cushion of thickness 150mm/ as specified to restore the seat in the same shape.The bottom of seat shall be packed with best quality hessian cloth and to be fixed with stapler pins complete all as specified and directed. |
| 276 | Removing old back materal i.e-elastic webbing tape, tapestry cloth, lining cloth, foam cushion from each back , S&F new elastic webbing tape 75mm wide,new tapestry cloth of rate not less than 350 per mtr in 560 GSM thickness of approved colour and shade, best quality lining cloth, 40 density PU foam cushion of thickness 150mm/ as specified to restore the seat in the same shape.The back of seat shall be packed with same tapestry cloth with proper workmanship complete all as specified and directed. |
| 277 | Removing old , S&F new legs of size 70mmx25mmx495mm made of 1st class teak wood using screws only with proper workmanship complete all as specified and directed & as shown on drawing. |
| 278 | Removing old , S&F new arm of size 70mmx25mmx745mm or made of 1st class teak wood using screws only with proper workmanship complete all as specified and directed & as shown on drawing. |
| 279 | Scratching the entire wooden pallets of sofa chair with sand emery paper of various grit , filling the pores with wood filler to make good the surface,After prepartion of surface the entire sofa chair shall be polished in french finish in high gloss with spary machine complete all as specified and diected. |
| 280 | Material and labour for polishing to articles of wooden furniture by adhering to following steps:-a) The wooden article shall be made smooth by sending the surface with sand paper of about 120 grit in the direction of grains of wood.b) Repeat the process with progressively finner grains with 180-220 grit sanding paper to make the surface more finer.c) Wipe out the surface and remove the dust with a fine cloth.d) Examine the surface and fill yellow oxide or wood filler/putty in the holes and sand the surface again to achieve a smooth and cleaner surface.e) Wipe it gain with cloth and apply a coat of polish and let it dry.f) Sand the surface again and apply next coat with a soft brush or cloth.g) Let the surface dry completely and apply a clear coat over it.h) The work will be executed at various units locations/residential accn or inside/outside restricted area as per user requirement. |
| 281 | Bed ply top with MNF Set, FD-246/247 |
| 282 | Bin linen multipurpose FD/E6/MAP/09 |
| 283 | Book case wooden FD-45/58 |
| 284 | Chair dining FD-279/228/1105 |
| 285 | Chair dining JCO/OR, FD/MAP-II/05 |
| 286 | Chair dining Offrs FD/MAP-II/04 |
| 287 | Chair Easy FD-17/229/201/1108 |
| 288 | Chair writing FD-280/250/20/202 |
| 289 | Hat stand with mirror FD-23/206/233 |
| 290 | Mirror Dressing gents FD/E6/MAP/16 |
| 291 | Side board FD-241/371/1112 |
| 292 | Sofa set 4 seater with cushion FD-281/258/373 |
| 293 | Sofa set 5 seater with cushion FD-281/258/373 |
| 294 | Stool dressing CB FD-282/252/374 |
| 295 | Stool dressing with cushion FD/E6/MAP/14 |
| 296 | Table 3'x2' w/o drawer (W) FD-284 |
| 297 | Table 3'x2' with drawer (W) FD-283 |
| 298 | Table bed side FD-276/28 |
| 299 | Table centre FD-274 |
| 300 | Table Dining 1200x900mm FD/MAP-II/03 |
| 301 | Table dining 6 persons FD/MAP-II/03 |
| 302 | Table dining 8 persons FD/MAP-II/03 |
| 303 | Table dressing gents FD-230/31 |
| 304 | Table writing FD-275/249/268 |
| 305 | Teapoy wooden FD-278/382/232/86 Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
