Tender For Construction Of New Building For Buildingless Anganbari Centre, Masratu - 3 In C Us Of Middle School, Masratu, Block - Katkamsandi, District - Hazaribag
Tender Value
15.27 Lakhs
Estimated cost
Bid Submission
19 Jun 2026
0 days left
EMD
30610
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Katkamsandi → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of New Building For Buildingless Anganbari Centre, Masratu - 3 In C Us Of Middle School, Masratu, Block - Katkamsandi, District - Hazaribag
BOQ
| Sl. No. | Item Description |
| 1 | E/W in excavation in foundation trenches in hard soil (vide classification of soil item - A+B ) and disposal of excavated earth as obtained to a distance up to 50M including all lifts with leveling, ramming the foundtion trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I B.C.D.S.O.R No 5.1.1 +5.1.2 |
| 2 | Providing sand filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all load and lifts including cost of all materials, labours, royelty and taxes all complete as per building specification & direction of E/I B.C.D.S.O.R No 5.1.10 |
| 3 | Providing Class 75B brick flat soling joint filled with local sandincluding cost of watering taxes, royelty all complete as per building specification and direction of E/I B.C.D.S.O.R No 5.6.3 |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) B.C.D.S.O.R No 5.3.1.2 |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) B.C.D.S.O.R No 5.3.9.1 |
| 7 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size). B.C.D.S.O.R No 5.3.5 |
| 8 | providing designation 75B brick work in C.M ( 1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints cost of screening materials rankig out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I B.C.D.S.O.R No 5.2.6 |
| 9 | providing designation 75B brick work in Cement Mortar (1:6) in super structure with approved quality of clean coarse sand of F M 2 to 2.5 including providing 10mm thick mortal joints, cost of sceening materials, racking out joints to 15mm depth , curing taxes and royelty all complete of job as per building specification and direction of E/I B.C.D. S.O.R. Item No 5.2.14 |
| 10 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) B.C.D.S.O.R No 5.3.10 |
| 11 | Reinforced cement concre work in beams,suspened floors, roofs having slope up to 15' landing, balconies, shelves, chajjas, lintels,bands,plain window sills, staircases and spiral stair cases above plinth level up to floor five level , excluding cost of centring, shuttering, finishing and reinforcement with : 1:1.5.3 (1 cement : 1.5 coars (zone-lll) : 3 graded stone aggregate 20 mm normal size) B.C.D.S.O.R No 5.3.11 |
| 12 | Centering and shuttering including strutting, propping etc. and removal of from for - Foundations,footings, bases of columns etc for mass concrete B.C.D.S.O.R No 5.3.17.1 |
| 13 | Centering and shuttering including strutting, propping etc. and removal of from for Lintels, beams, plinth beams, girders, bressumers and cantilevers. B.C.D.S.O.R No 5.3.17.5 |
| 14 | Centering and shuttering including strutting, propping etc. and removal of from for Columns, pillars, piers, Abutments, posts and struts B.C.D.S.O.R No 5.3.17.6 |
| 15 | Centering and shuttering including strutting, propping etc. and removal of from for Weather shade, Chajjas, corbels etc., including edges B.C.D.S.O.R No 5.3.17.19 |
| 16 | Centering and shuttering including strutting, propping etc. and removal of from forSuspended floors, roofs, landings, balconies and access platform BCD 5.3.17.3 |
| 17 | Supplying, and fixing fan hook of 16mm dia M.S. bar 1 meter long bent to required size and shape , placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. (where materials is not supplied by the deptt.) .B.C.D.S.O.R No 5.5.13 |
| 18 | Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.) .B.C.D.S.O.R No 5.5.12 |
| 19 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I..B.C.D.S.O.R No 5.5.14 |
| 20 | Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.B.C.D.S.O.R No 5.5.29 |
| 21 | Providing 25mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layers 19mm. Thick (1:2:4)with 12mm to 6mm. Size graded stone chips and top layer 6mm. Thicks (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I..B.C.D.S.O.R No 5.6.7 |
| 22 | Providing 12mm cement plaster (1:6) with clean cdarse sand of F M 1.5 including cost of sceening, curing with all leads and lifts of water, scaffolding, taxes and royelty all complete as per building specification and direction E/I B.C.D.S.O.R No 5.7.3 |
| 23 | Providing 12 mm thick cement plaster (1:4) with clean coarse sand of F.M with 1.5 mm cement punning including screening, curing with all leads and lifts of water, scaffolding, taxes and royelty all complete as per specification and direction of E/I B.C.D.S.O.R No 5.7.2 +5.7.11 |
| 24 | Providing 6mm cement plaster (1:4) in ceiling with clean cdarse sand of F M 1.5 including cost of sceening, curing with all leads and lifts of water, scaffolding, taxes and royelty all complete as per building specification and direction E/I B.C.D.S.O.R No 5.7.6 |
| 25 | Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I. B.C.D.S.O.R No 5.7.1+5.7.11 |
| 26 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., completeD.S.R. Item No. 11.39 |
| 27 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. D.S.R. Item No. 8.31 |
| 28 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm D.S.R. Item No. 8.2.2.2 |
| 29 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.B.C.D.S.O.R No 5.3.8 |
| 30 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) B.C.D.S.O.R No 5.5.4 |
| 31 | providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. (a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL) } B.C.D.S.O.R No 5.5.5 (a) |
| 32 | providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. (a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL) } B.C.D.S.O.R No 5.5.5 (b) |
| 33 | Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume) B.C.D.S.O.R No 5.1.7 |
| 34 | Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I. B.C.D.S.O.R No 5.8.24 |
| 35 | Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.B.C.D.S.O.R No 5.8.43 |
| 36 | Carriage of materials including loading, unloading, stacking -do- -do- all complete job as per specification and direction of E/I.(i) Cement |
| 37 | Carriage of materials including loading, unloading, stacking -do- -do- all complete job as per specification and direction of E/I. (ii) Sand |
| 38 | Carriage of materials including loading, unloading, stacking -do- -do- all complete job as per specification and direction of E/I.(iii) Stone Chips |
| 39 | Carriage of materials including loading, unloading, stacking -do- -do- all complete job as per specification and direction of E/I. (v) Steel |
| 40 | Carriage of materials including loading, unloading, stacking -do- -do- all complete job as per specification and direction of E/I (vi).Bricks |
| 41 | Point wiring in PVC consuit, with piano type switch -Wiring for light point/exhaust fan point/call bell point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size PVC/G.I. box etc. as requiredGroup B |
| 42 | Circuit/submain wiring in PVC conduit - Wiring for Circuit/submain wiring along with earth wire the following sizes PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required.2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire |
| 43 | 2x2.5 Sqmm + 1x2.5 sq mm earth wire |
| 44 | S/F piano type switch/socket - Supplying and fixing following piano tyep switch/socket on the existing switch box/cover including connections etc. as required.5/6 amps, one way switch |
| 45 | 3 pin 5/6 amps, socket outlet |
| 46 | S/F ceiling rose - Supplying and fixing 2 pin 5 amp ceiling rose on the existing junction box/wooden block including connection etc. as required. |
| 47 | S/F Batten holder - Supplying and fixing batten/angle holder including connection etc. as required. |
| 48 | S/F PVC /G.I. boxes - Supplying and fixing PVC/G.I. box of following sizes on surface or in recess with suitable size of phenolic laminated sheet cover infront including painting etc. as required.75mm x 75mm x 50mm deep/(4\\" x 4\\") |
| 49 | 72mm x 146mm x 48mm deep/(4\\" x 7\\") |
| 50 | 121mm x 173mm x 48mm deep/(6\\" x 8\\") |
| 51 | 9/10Watt LED Bulb |
| 52 | Supply, Installation, testing and commissioning of following, size ceiling fan 3 Blades confirming to IS : 374 : 2019 including wiring the down rods of standard length (up to 30cm) with 1.5 sq.mm. FR PVC insulated, copper wire suitable for 230V 50Hz, single phase supply etc. complete as required.1200mm (48\\") ceiling Fan |
| 53 | 12\\" (300mm) metal exhaust fan |
| 54 | Cost of New Electric Connection |
| 55 | Cost of drilling 115mm/125mm deep bore well in all kinds of soil and rock in rural area for installation of pump set with D.T.H rig all complete! Including supplying all materials,labours,tools,drilling rig,air compressor and equipment as well as fuel,lubricant for making boring and cost of transporting/charges of rig machine & other vechiles up to site of the work as per specification and direction of E/I. (a ) Up to 30mtr Below G.L. |
| 56 | Cost of drilling 115mm/125mm deep bore well in all kinds of soil and rock in rural area for installation of pump set with D.T.H rig all complete! Including supplying all materials,labours,tools,drilling rig,air compressor and equipment as well as fuel,lubricant for making boring and cost of transporting/charges of rig machine & other vechiles up to site of the work as per specification and direction of E/I.(B) Beyond 30 Mtr Up to60 Mtr Below G.l |
| 57 | Providing all equipment and labour for lowering 125mm dia; UPVC casing pipes as casing for protecting the side from falling during the process of milling ail complete including carriage to work site. |
| 58 | Supplying labour, cement and calcium chloride or bentonite solution and equipment for grouting to casing bentonite solution and equipment for grouting to casing pipe. |
| 59 | Supplying all tools,equipment and labour and doing washing, flushing and developing of drilled tube welt to give clean and clear watwer all complete as per direction of E/I |
| 60 | Supplying labour and equipment including 125mm dia G.I. Cap and fitting and fixing over the tube well properly and taking it out as per direction of E/I |
| 61 | Supplying all tools, labours, equipment for lowering 32mm dia G.I suspension pipe in 3 mtr. Length in the drilling bore of tube well etc. all complete job as per direction of E/I. |
| 62 | Supplying labour for fitting and fixing deep well cylinder jointing materials, chrome leather bucket all tools and plan etc. required for the job of low water level all comlete job as per specification and direction of E/I |
| 63 | Providing all labour for fitting and fixing of India Mark-II hand pump including supplying all tools and plate etc. as required for the job all complete job as per direction of E/I |
| 64 | Supplying all materials, labour & equipment for constructing P.C.C. (1:2:4) circular platform around each drilled tube well including 12mm thick cement plaster (1:4) with neat cement punning over exposed surface as per UNICEF design etc. all complete. |
| 65 | Supplying all materials labour & equipment for constructing P.C.C. (1:2:4) drain as per UNICEF design etc. all complete. |
| 66 | Cost of 1 no. I.S.I. Marked India Mark-II hand pump confirming to IS. 15500 (Part-II)/2004 with amendment with all accessories including 8 nos. 12mm dia B.S. connecting rod. |
| 67 | Cost of 32mm dia G.I. pipe 3 M long screwed at both ends with seamless Socket as per IS. 1239 (Part-II)/1990 |
| 68 | Cost of 125mm dia blue UPVC casing pipe as per I.S. 12818-1392 |
| 69 | Supplying Submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415V + 10%, 3PH, 50 Hz, A.C. supply with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/double run shall be provided with each pump.Submersible Pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages - 2 HP |
| 70 | Supplying fitting and fixing of 5 H.P . Starter panel board with arrangement of all necessary protection including all taxes, royalty etc all comlete job as per direction of E/I. |
| 71 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 50mm nominal dia Pipe DSR 18.9.4 |
| 72 | Providing and fixing male ended 15mm dia brass bib cock of approved quality (Wt. not less than 350 gms.) with extra socket all complere as per specification and direction of E/I. |
| 73 | Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'p' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stop cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and dirction of E/I.580mm long - With 10 liter low level PVC cistern |
| 74 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with sea; ring conforming to IS:5382, leaving 10mm gap for thermal expansion, Single socketed pipes110mm |
| 75 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :610x460 mm bowl depth 200 mm D.S.R. Item No. 17.10.2.2 |
| 76 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with sea; ring conforming to IS:5382, leaving 10mm gap for thermal expansion, Single socketed pipes110 mmSingle tee with door - 110x110x110 mm |
| 77 | Bend 87.5° - 110 |
| 78 | Shoe - 110mm |
| 79 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.32 mm nominal outer dia Pipes |
| 80 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.20 mm nominal outer dia Pipes |
| 81 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. |
| 82 | Add G.S.T ( Goods & Service Tax ) |
| 83 | Add Labour Cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJun 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender