|
| 1 | DECENTRALIZE MATERIAL (MATERIAL SUPPLIED BY CONTRACTOR) |
| 2 | PART -A 33/11 KV SUB STATION |
| 3 | Terminal Gantry |
| 4 | Main Bus Bar complete with structure |
| 5 | PG Clamp Panther to Panther Conductor |
| 6 | Structure for LSI & BSI |
| 7 | Structure for 33KV Post Insulator |
| 8 | Structure for 33 KV CT |
| 9 | Structures for 33KV PTs |
| 10 | Material of Plinth & foundation of VCB |
| 11 | Structure for 33KV fuse set |
| 12 | Structure for 33KV LA |
| 13 | 90 Lbs. Rail pieces for T/F Wt. 44.6 Kg/Mtr. @ Rs. 22.10 Per Kg. |
| 14 | M.S. Channel (100×50)mm |
| 15 | Copper Bus Bar size 50×6 mm–2.4 Mtr. long |
| 16 | M.S. Angle (65×65×6)mm |
| 17 | Meter Box for 33 kv TVM |
| 18 | Earth Mat for outdoor equipment |
| 19 | Earth Mat for indoor equipment |
| 20 | Structure for cable suport and L Type Structure for Neutral |
| 21 | Material of Grouting of pole (0.268 CuM) In Addition muffing 300mm |
| 22 | Top channel 100x50x6 mm 2240mm long |
| 23 | Holding clamp for Top/Dropper channel |
| 24 | G.I. pipe 6 inch Dia |
| 25 | Channel 100x50x6mm 2028 mm long for G.I pipe |
| 26 | Holding clamp for channel |
| 27 | Holding clamp for cable |
| 28 | 9 KV LA |
| 29 | Danger board |
| 30 | Number Plate |
| 31 | PG Clamp For Rabbit |
| 32 | Barbed wire |
| 33 | Stone Pad |
| 34 | Nut, Bolt & washer |
| 35 | Dropper channel |
| 36 | E-bracket |
| 37 | MS Angle 75x75x6 mm (T/F base & LTDB) with clamp |
| 38 | LTDB with 2 sets of rewireable type fuse unit |
| 39 | Lighting of outdoor switchyard & approach road lighting |
| 40 | Material of Painting of Sub-Station structure & Equipment |
| 41 | 10' inch exhaust Fan Complete in every respect |
| 42 | T&P of Substation of switchgears as per Annexure - 05 |
| 43 | Cost of Misc. Items i.e. Rubber Matting Single Line Diagram Board, Tripping Chart Board, S/S Board |
| 44 | Fire Fighting equipments including 02 Nos. 4.5 Kg. Co2 Fire Extinguisher potable type and 02 Nos. Foam type Fire Extinguisher potable type |
| 45 | Substation Furniture (4–Chairs, 1–Table, 1–Bench, 1–Rack, 1–Stool) |
| 46 | Sundries Charges |
| 47 | Capacitor bank 1.98 MVAR (1 Year +3 Year) AMC (Annual Maintinance Contract) as per Annexure - 01 |
| 48 | Material of Plinth & foundation of 5MVA Power T/F |
| 49 | Lighting/High mask (Complete) |
| 50 | PART -B 33 KV LINE |
| 51 | G I Pipe 150 mm Dia |
| 52 | HDPE Pipe PN-6, 160mm dia |
| 53 | Aluminium Paint |
| 54 | Bracing set 4.3 x 4.3 Mtr Angle Iron 65x65x6 mm with holding clamp |
| 55 | Clamp for 33 KV \\"V\\" type Cross arm with bolts and nuts |
| 56 | Material of Concreting of Support (0.268 CuM) in addition muffing 300 mm |
| 57 | Danger Plate with clamp and Nut & Bolt |
| 58 | Dropper Channel 100x50mm, 3200 mm long |
| 59 | E-bracket for 33 KV |
| 60 | F-bracket for 33 KV |
| 61 | G I Barbed Wire |
| 62 | Holding Clamps |
| 63 | MS Angle 65x65x6, 3200 mm |
| 64 | Holding Clamp for Guarding angle |
| 65 | Number Plate with clamp and Nut & Bolt |
| 66 | Nut Bolt and washer all sizes |
| 67 | PG Clamp Dog to Dog |
| 68 | Red Oxide Paint |
| 69 | Stone Pad (300x300x75 mm) |
| 70 | Top Channel 125x65 mm, 3200 mm long |
| 71 | M S Channel 100x50 mm 2400 mm Long |
| 72 | Holding clamp for G.I pipe |
| 73 | Holding clamp for cable |
| 74 | Lug for ACSR Dog conductor |
| 75 | Aluminium Jointing Sleeves |
| 76 | Neutral cum earth wire |
| 77 | cable route marker |
| 78 | PART -C 11 KV LINE |
| 79 | Aluminium Paint |
| 80 | Bracing set 4.3 x 4.3 Mtr Angle Iron 65x65x6 mm with holding clamp |
| 81 | Clamp for 11 KV \\"V\\" type Cross arm with bolts and nuts |
| 82 | Clamp for 33 KV \\"V\\" type Cross arm with bolts and nuts |
| 83 | Material of Concreting of Support (0.268 CuM) in addition muffing 300 mm |
| 84 | Danger Plate with clamp and Nut & Bolt |
| 85 | Dropper Channel 100x50mm, 3200 mm long |
| 86 | E-bracket for 11 KV |
| 87 | F-Bracket for 11KV |
| 88 | F-Bracket for 33KV |
| 89 | G I Barbed Wire |
| 90 | Holding Clamp for channels |
| 91 | MS Angle 65x65x6 |
| 92 | Holding Clamp for MS angle |
| 93 | Number Plate with clamp and Nut & Bolt |
| 94 | Nut Bolt and washer all sizes |
| 95 | PG Clamp Rabbit |
| 96 | Red Oxide Paint |
| 97 | Stone Pad (300x300x75 mm) |
| 98 | Top Channel 100x50x6 mm, 2400 mm long |
| 99 | Aluminium Jointing sleeves |
| 100 | Neutral cum earth wire |
| 101 | Safe Carriage Following Item From Any Store Center & Local Authorized Supplier ( Under Juridiction of DVVNL) To Site Store With Loading Unloading At Both End Respectively |
| 102 | PART -A 33/11 KV SUB STATION |
| 103 | 33 KV Pin insulators Polymeric |
| 104 | ACSR Panther Conductor |
| 105 | 33 KV line Isolator |
| 106 | 33 KV Bus Isolator |
| 107 | 33 KV post insulators |
| 108 | 33 KV VCB 1250A |
| 109 | 33 KV double T/F Control Panel |
| 110 | 33 KV C.T. 200/100/1-A |
| 111 | 33 KV PT, 33 KV/110V-1 Phase |
| 112 | 33 KV Control pannel single feeder with diff/relay |
| 113 | 33 kv CT 400/200/1A |
| 114 | 33 KV Fuse Set |
| 115 | 33 KV Lightning Arrestors |
| 116 | 11 KV Pin Insulator polymeric |
| 117 | 11 KV VCB (Incoming) 600/300/5A 350 MVA |
| 118 | 11 KV VCB (Out going) 200/100/5A 350 MVA |
| 119 | Bus Coupler, 350 MVA |
| 120 | 11 kv xlpe cable 3×300 mm2 XLPE |
| 121 | 11 KV 3×185 mm2 XLPE |
| 122 | 11 KV 3×300 mm outdoor jointing kit |
| 123 | 11 KV 3×300mm indoor Epoxy Type jointing kit |
| 124 | 11 KV 3×185 mm2 outdoor Epoxy Type jointing kit |
| 125 | 11 KV 3×185 mm2 indoor Epoxy Type jointing kit |
| 126 | 33 KV Electronic TVM Meter |
| 127 | 24 Volt Battery & Battery Charger with cabinet |
| 128 | 8.5 mtr pcc pole |
| 129 | 11KV 3 Ph DO fuse set |
| 130 | Earthing of pole by MS earthing rod of 20x2500 mm. and 6 SWG earthing wire etc. |
| 131 | 11KV TPMO |
| 132 | 11 KV Disc fitting B&S 70 KN |
| 133 | 11 Kv Disc Insulator B&S 70 KN |
| 134 | Stay set complete |
| 135 | 63 KVA 11/0.4 KV Transformer |
| 136 | L.T.P.V.C. Cable 3½×70 mm2 |
| 137 | Terminal Gantry |
| 138 | Main Bus Bar complete with structure |
| 139 | PG Clamp Panther to Panther Conductor |
| 140 | Structure for LSI & BSI |
| 141 | Structure for 33KV Post Insulator |
| 142 | Structure for 33 KV CT |
| 143 | Structures for 33KV PTs |
| 144 | Material of Plinth & foundation of VCB |
| 145 | Structure for 33KV fuse set |
| 146 | Structure for 33KV LA |
| 147 | 90 Lbs. Rail pieces for T/F Wt. 44.6 Kg/Mtr. @ Rs. 22.10 Per Kg. |
| 148 | M.S. Channel (100×50)mm |
| 149 | Copper Bus Bar size 50×6 mm–2.4 Mtr. long |
| 150 | M.S. Angle (65×65×6)mm |
| 151 | Meter Box for 33 kv TVM |
| 152 | Earth Mat for outdoor equipment |
| 153 | Earth Mat for indoor equipment |
| 154 | Structure for cable suport and L Type Structure for Neutral |
| 155 | Material of Grouting of pole (0.268 CuM) In Addition muffing 300mm |
| 156 | Top channel 100x50x6 mm 2240mm long |
| 157 | Holding clamp for Top/Dropper channel |
| 158 | G.I. pipe 6 inch Dia |
| 159 | Channel 100x50x6mm 2028 mm long for G.I pipe |
| 160 | Holding clamp for channel |
| 161 | Holding clamp for cable |
| 162 | 9 KV LA |
| 163 | Danger board |
| 164 | Number Plate |
| 165 | PG Clamp For Rabbit |
| 166 | Barbed wire |
| 167 | Stone Pad |
| 168 | Nut, Bolt & washer |
| 169 | Dropper channel |
| 170 | E-bracket |
| 171 | MS Angle 75x75x6 mm (T/F base & LTDB) with clamp |
| 172 | LTDB with 2 sets of rewireable type fuse unit |
| 173 | Lighting of outdoor switchyard & approach road lighting |
| 174 | Material of Painting of Sub-Station structure & Equipment |
| 175 | 10' inch exhaust Fan Complete in every respect |
| 176 | T&P of Substation of switchgears as per Annexure - 05 |
| 177 | Cost of Misc. Items i.e. Rubber Matting Single Line Diagram Board, Tripping Chart Board, S/S Board |
| 178 | Fire Fighting equipments including 02 Nos. 4.5 Kg. Co2 Fire Extinguisher potable type and 02 Nos. Foam type Fire Extinguisher potable type |
| 179 | Substation Furniture (4–Chairs, 1–Table, 1–Bench, 1–Rack, 1–Stool) |
| 180 | Sundries Charges |
| 181 | Capacitor bank 1.98 MVAR (1 Year +3 Year) AMC (Annual Maintinance Contract) as per Annexure - 01 |
| 182 | Material of Plinth & foundation of 5MVA Power T/F |
| 183 | Lighting/High mask (Complete) |
| 184 | PART -B 33 KV LINE |
| 185 | 33 KV polymeric pin insulator |
| 186 | 9 meter pcc pole |
| 187 | 11 meter pcc pole |
| 188 | 11 Mtr ST POLE |
| 189 | 13 Mtr ST POLE |
| 190 | 33 KV Cable jointing kit for 3×300mm sq. XLPE Cable out door |
| 191 | 33 KV V-Type Steel Cross Arm |
| 192 | 33 KV XLPE cable 3x300 mm2 |
| 193 | ACSR DOG conductor with 3% sag & wastage due to binding, bridling, jumpering etc. |
| 194 | 33 KV Complete stay set |
| 195 | 33 kvDisc fitting B&S type 70 KN |
| 196 | 33 kv Disc insulator B&S polymeric type 70 KN |
| 197 | Earthing of pole by MS earthing rod of 20x2500 mm. and 6 SWG earthing wire etc. |
| 198 | G.I.Wire 8swg |
| 199 | G.I.Wire 6swg |
| 200 | G I Pipe 150 mm Dia |
| 201 | HDPE Pipe PN-6, 160mm dia |
| 202 | Aluminium Paint |
| 203 | Bracing set 4.3 x 4.3 Mtr Angle Iron 65x65x6 mm with holding clamp |
| 204 | Clamp for 33 KV \\"V\\" type Cross arm with bolts and nuts |
| 205 | Material of Concreting of Support (0.268 CuM) in addition muffing 300 mm |
| 206 | Danger Plate with clamp and Nut & Bolt |
| 207 | Dropper Channel 100x50mm, 3200 mm long |
| 208 | E-bracket for 33 KV |
| 209 | F-bracket for 33 KV |
| 210 | G I Barbed Wire |
| 211 | Holding Clamps |
| 212 | MS Angle 65x65x6, 3200 mm |
| 213 | Holding Clamp for Guarding angle |
| 214 | Number Plate with clamp and Nut & Bolt |
| 215 | Nut Bolt and washer all sizes |
| 216 | PG Clamp Dog to Dog |
| 217 | Red Oxide Paint |
| 218 | Stone Pad (300x300x75 mm) |
| 219 | Top Channel 125x65 mm, 3200 mm long |
| 220 | M S Channel 100x50 mm 2400 mm Long |
| 221 | Holding clamp for G.I pipe |
| 222 | Holding clamp for cable |
| 223 | Lug for ACSR Dog conductor |
| 224 | Aluminium Jointing Sleeves |
| 225 | Neutral cum earth wire |
| 226 | cable route marker |
| 227 | PART- C 11 KV LINE |
| 228 | 11kv polymeric pin insulator |
| 229 | 33 KV polymeric pin insulator |
| 230 | 8.5 M PCC Pole |
| 231 | 13 meter Stp pole |
| 232 | 11 kV V-Type Steel Cross Arm |
| 233 | 33 KV V-Type Steel Cross Arm |
| 234 | ACSR Rabbit conductor with 3% sag & wastage due to binding, bridling, jumpering etc. |
| 235 | 11 KV Complete stay set |
| 236 | 11 kvDisc fitting T&C 45 KN |
| 237 | 11 kv Disc insulator T&C 45 KN |
| 238 | Earthing of pole by MS earthing rod of 20x2500 mm. and 6 SWG earthing wire etc. |
| 239 | G.I.Wire 8swg |
| 240 | G.I.Wire 6swg |
| 241 | Aluminium Paint |
| 242 | Bracing set 4.3 x 4.3 Mtr Angle Iron 65x65x6 mm with holding clamp |
| 243 | Clamp for 11 KV \\"V\\" type Cross arm with bolts and nuts |
| 244 | Clamp for 33 KV \\"V\\" type Cross arm with bolts and nuts |
| 245 | Material of Concreting of Support (0.268 CuM) in addition muffing 300 mm |
| 246 | Danger Plate with clamp and Nut & Bolt |
| 247 | Dropper Channel 100x50mm, 3200 mm long |
| 248 | E-bracket for 11 KV |
| 249 | F-Bracket for 11KV |
| 250 | F-Bracket for 33KV |
| 251 | G I Barbed Wire |
| 252 | Holding Clamp for channels |
| 253 | MS Angle 65x65x6 |
| 254 | Holding Clamp for MS angle |
| 255 | Number Plate with clamp and Nut & Bolt |
| 256 | Nut Bolt and washer all sizes |
| 257 | PG Clamp Rabbit |
| 258 | Red Oxide Paint |
| 259 | Stone Pad (300x300x75 mm) |
| 260 | Top Channel 100x50x6 mm, 2400 mm long |
| 261 | Aluminium Jointing sleeves |
| 262 | Neutral cum earth wire |
| 263 | Erection, Fixing, digging of trenches & Laying work of following materials |
| 264 | PART -A 33/11 KV SUB STATION |
| 265 | 33 KV Pin insulators Polymeric |
| 266 | ACSR Panther Conductor |
| 267 | 33 KV line Isolator |
| 268 | 33 KV Bus Isolator |
| 269 | 33 KV post insulators |
| 270 | 33 KV VCB 1250A |
| 271 | 33 KV double T/F Control Panel |
| 272 | 33 KV C.T. 200/100/1-A |
| 273 | 33 KV PT, 33 KV/110V-1 Phase |
| 274 | 33 KV Control pannel single feeder with diff/relay |
| 275 | 33 kv CT 400/200/1A |
| 276 | 33 KV Fuse Set |
| 277 | 33 KV Lightning Arrestors |
| 278 | 11 KV Pin Insulator polymeric |
| 279 | 11 KV VCB (Incoming) 600/300/5A 350 MVA |
| 280 | 11 KV VCB (Out going) 200/100/5A 350 MVA |
| 281 | Bus Coupler, 350 MVA |
| 282 | Laying of 11 kv xlpe cable 3×300 mm2 XLPE |
| 283 | Laying of 11 KV 3×185 mm2 XLPE |
| 284 | Mamking of 11 KV 3×300 mm outdoor jointing kit |
| 285 | Mamking of 11 KV 3×300mm indoor Epoxy Type jointing kit |
| 286 | Mamking of 11 KV 3×185 mm2 outdoor Epoxy Type jointing kit |
| 287 | Mamking of 11 KV 3×185 mm2 indoor Epoxy Type jointing kit |
| 288 | 33 KV Electronic TVM Meter |
| 289 | 24 Volt Battery & Battery Charger with cabinet |
| 290 | 8.5 mtr pcc pole |
| 291 | 11KV 3 Ph DO fuse set |
| 292 | Earthing of pole by MS earthing rod of 20x2500 mm. and 6 SWG earthing wire etc. |
| 293 | 11KV TPMO |
| 294 | 11 KV Disc fitting B&S 70 KN |
| 295 | 11 Kv Disc Insulator B&S 70 KN |
| 296 | Stay set complete |
| 297 | 63 KVA 11/0.4 KV Transformer |
| 298 | L.T.P.V.C. Cable 3½×70 mm2 |
| 299 | Terminal Gantry |
| 300 | Main Bus Bar complete with structure |
| 301 | PG Clamp Panther to Panther Conductor |
| 302 | Structure for LSI & BSI |
| 303 | Structure for 33KV Post Insulator |
| 304 | Structure for 33 KV CT |
| 305 | Structures for 33KV PTs |
| 306 | Plinth & foundation of VCB |
| 307 | Structure for 33KV fuse set |
| 308 | Structure for 33KV LA |
| 309 | 90 Lbs. Rail pieces for T/F Wt. 44.6 Kg/Mtr. @ Rs. 22.10 Per Kg. |
| 310 | M.S. Channel (100×50)mm |
| 311 | Copper Bus Bar size 50×6 mm–2.4 Mtr. long |
| 312 | M.S. Angle (65×65×6)mm |
| 313 | Meter Box for 33 kv TVM |
| 314 | Earth Mat for outdoor equipment |
| 315 | Earth Mat for indoor equipment |
| 316 | Structure for cable suport and L Type Structure for Neutral |
| 317 | Grouting of pole (0.268 CuM) In Addition muffing 300mm |
| 318 | Top channel 100x50x6 mm 2240mm long |
| 319 | Holding clamp for Top/Dropper channel |
| 320 | G.I. pipe 6 inch Dia |
| 321 | Channel 100x50x6mm 2028 mm long for G.I pipe |
| 322 | Holding clamp for channel |
| 323 | Holding clamp for cable |
| 324 | 9 KV LA |
| 325 | Danger board |
| 326 | Number Plate |
| 327 | PG Clamp For Rabbit |
| 328 | Barbed wire |
| 329 | Stone Pad |
| 330 | Nut, Bolt & washer |
| 331 | Dropper channel |
| 332 | E-bracket |
| 333 | MS Angle 75x75x6 mm (T/F base & LTDB) with clamp |
| 334 | LTDB with 2 sets of rewireable type fuse unit |
| 335 | Lighting of outdoor switchyard & approach road lighting |
| 336 | Painting of Sub-Station structure & Equipment |
| 337 | 10' inch exhaust Fan Complete in every respect |
| 338 | T&P of Substation of switchgears as per Annexure - 05 |
| 339 | Construction of Control Cable Trench with all material |
| 340 | Cost of Misc. Items i.e. Rubber Matting Single Line Diagram Board, Tripping Chart Board, S/S Board |
| 341 | Fire Fighting equipments including 02 Nos. 4.5 Kg. Co2 Fire Extinguisher potable type and 02 Nos. Foam type Fire Extinguisher potable type |
| 342 | Substation Furniture (4–Chairs, 1–Table, 1–Bench, 1–Rack, 1–Stool) |
| 343 | Sundries Charges |
| 344 | Capacitor bank 1.98 MVAR (1 Year +3 Year) AMC (Annual Maintinance Contract) as per Annexure - 01 |
| 345 | Plinth & foundation of 5MVA Power T/F |
| 346 | Construction of Fire Wall with material |
| 347 | Construction of SSO's approached road 1.2 Mtr. wide in Switchyard by laying dry brick ballast in 15 cm layer, 115 mm thick brick work 1:4 in both side of edge, providing 10cm thick CC in ratio 1:2:4. The work include proper plastering top & side of road and making groove, leveling & dressing of earth beneath the brick work on edge with material. |
| 348 | Water level Earthing of Neutral, Power T/f, 33 kV VCB, 33 kV LA, 33 kV CT etc with complete all material |
| 349 | Lighting/High mask (Complete) |
| 350 | PART -B 33 KV LINE |
| 351 | 33 KV polymeric pin insulator |
| 352 | 9 meter pcc pole |
| 353 | 11 meter pcc pole |
| 354 | 11 Mtr ST POLE |
| 355 | 13 Mtr ST POLE |
| 356 | 33 KV V-Type Steel Cross Arm |
| 357 | ACSR DOG conductor with 3% sag & wastage due to binding, bridling, jumpering etc. |
| 358 | 33 KV Complete stay set |
| 359 | 33 kvDisc fitting B&S type 70 KN |
| 360 | 33 kv Disc insulator B&S polymeric type 70 KN |
| 361 | Earthing of pole by MS earthing rod of 20x2500 mm. and 6 SWG earthing wire etc. |
| 362 | G.I.Wire 8swg |
| 363 | G.I.Wire 6swg |
| 364 | Aluminium Paint |
| 365 | Bracing set 4.3 x 4.3 Mtr Angle Iron 65x65x6 mm with holding clamp |
| 366 | Clamp for 33 KV \\"V\\" type Cross arm with bolts and nuts |
| 367 | Concreting of Support (0.268 CuM) in addition muffing 300 mm |
| 368 | Danger Plate with clamp and Nut & Bolt |
| 369 | Dropper Channel 100x50mm, 3200 mm long |
| 370 | E-bracket for 33 KV |
| 371 | F-bracket for 33 KV |
| 372 | G I Barbed Wire |
| 373 | Holding Clamps |
| 374 | MS Angle 65x65x6 |
| 375 | Holding Clamp for Guarding angle |
| 376 | Number Plate with clamp and Nut & Bolt |
| 377 | Nut Bolt and washer all sizes |
| 378 | PG Clamp Dog to Dog |
| 379 | Red Oxide Paint |
| 380 | Stone Pad (300x300x75 mm) |
| 381 | Top Channel 125x65 mm, 3200 mm long |
| 382 | M S Channel 100x50 mm 2400 mm Long |
| 383 | Holding clamp for G.I pipe |
| 384 | Holding clamp for cable |
| 385 | Lug for ACSR Dog conductor |
| 386 | Aluminium Jointing Sleeves |
| 387 | Neutral cum earth wire |
| 388 | cable route marker |
| 389 | Making of J/kit |
| 390 | Digging & laying of 33 KV Cable (Double ckt) in trench with sand & brick and back filling |
| 391 | Laying of 33 KV Cable in Air through G.I. Pipe |
| 392 | Tree Cutting Compensation |
| 393 | Gaurding of 33 kV line |
| 394 | Laying of HDPE Pipe PN-6, DN-160mm dia Pipe for laying of 33KV, 3x300Sq.mm, XLPE Cable with HDD (trenchless) method including cable laying. |
| 395 | PART- C 11 KV LINE |
| 396 | 11kv polymeric pin insulator |
| 397 | 33 KV polymeric pin insulator |
| 398 | 8.5 M PCC Pole |
| 399 | 13 meter Stp pole |
| 400 | 11 kV V-Type Steel Cross Arm |
| 401 | 33 KV V-Type Steel Cross Arm |
| 402 | ACSR Rabbit conductor with 3% sag & wastage due to binding, bridling, jumpering etc. |
| 403 | 11 KV Complete stay set |
| 404 | 11 kvDisc fitting T&C 45 KN |
| 405 | 11 kv Disc insulator T&C 45 KN |
| 406 | Earthing of pole by MS earthing rod of 20x2500 mm. and 6 SWG earthing wire etc. |
| 407 | G.I.Wire 8swg |
| 408 | G.I.Wire 6swg |
| 409 | Aluminium Paint |
| 410 | Bracing set 4.3 x 4.3 Mtr Angle Iron 65x65x6 mm with holding clamp |
| 411 | Clamp for 11 KV \\"V\\" type Cross arm with bolts and nuts |
| 412 | Clamp for 33 KV \\"V\\" type Cross arm with bolts and nuts |
| 413 | Concreting of Support (0.268 CuM) in addition muffing 300 mm |
| 414 | Danger Plate with clamp and Nut & Bolt |
| 415 | Dropper Channel 100x50mm, 3200 mm long |
| 416 | E-bracket for 11 KV |
| 417 | F-Bracket for 11KV |
| 418 | F-Bracket for 33KV |
| 419 | G I Barbed Wire |
| 420 | Holding Clamp for channels |
| 421 | MS Angle 65x65x6 |
| 422 | Holding Clamp for MS angle |
| 423 | Number Plate with clamp and Nut & Bolt |
| 424 | Nut Bolt and washer all sizes |
| 425 | PG Clamp Rabbit |
| 426 | Red Oxide Paint |
| 427 | Stone Pad (300x300x75 mm) |
| 428 | Top Channel 100x50x6 mm, 2400 mm long |
| 429 | Aluminium Jointing sleeves |
| 430 | Tree Cutting Compensation |
| 431 | Extra Cost of Road/Communication lines/11 kv lines crossing on each crossing |
| 432 | Survey and lay out of Sub-station |
| 433 | Testing & commissioning charges of Substation. |
| 434 | Neutral cum earth wire |
| 435 | Gaurding of 11 kV line Please Enable Macros to View BoQ information |