|
| 1 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead asper direction of Engineer-in-Charge. DSR 2023 16.83 (RATE-131.75) |
| 2 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. DSR 2023 S I No 15.25 (Rate 266.45) |
| 3 | Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). DSR 2023 S I No 16.84 (Rate 402.95) |
| 4 | Providing and laying OF 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources DSR 4.1.8/2023 (Rate 6812.00/Cum) |
| 5 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern.. DSR 2023 16.91.2 (RATE-1091.50) |
| 6 | Construction of Granular Sub-Base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 By Mix in Place Method |
| 7 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of he slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick DSR 2023/11.26.1 (Rate 1948.25/Sqm) |
| 8 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc.complete DSR2023/13.88(RATE-19.75) |
| 9 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping groundwithin 50 metres lead.DSR 2023 15.56 (RATE-54.65) |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work DSR 2023/13.61 (Rate 155.90) |
| 11 | 12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand) DSR 2023 13.4.1 (RATE-357.35) |
| 12 | Providing and applying white cement based putty of averag thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.DSR 2023 13.46.1 (RATE-156.05) |
| 13 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm DSR 2023/13.80 (Rate 193.70) |
| 14 | Finishing walls with Acrylic Smooth exterior paint of required shade :13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (Rate 160.60) |
| 15 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushin cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests .DSR 2023 17.1.1(RATE- 6767.40) |
| 16 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flus bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lidDSR 2023 17.3.1 (RATE-8006.60) |
| 17 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms15 mm nominal bore.DSR 2023 18.51.1(RATE-798.95) |
| 18 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore. SOR 18.52.1(RATE-670.45). |
| 19 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore.DSR 2023 18.53.1(RATE-574.30) |
| 20 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. DSR 2023 17.31 (RATE-1607.95) |
| 21 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete 32 mm dia.DSR 2023 17.28.2.1(RATE-119.55) |
| 22 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore DSR 2023/18.17.1(RATE-622.40) |
| 23 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore DSR2023/18.18.3(RATE-464.05) |
| 24 | Providing and fixing wash basin with C.I. brackets, 16 mm C.P. brass pillar taps, 32 mm C.P, brass waste of standard pattern, including painting of fillings and brackets, culling and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. DSR No. 17.7.1 2023 (RATE-2648.85) |
| 25 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal dia Pipes DSR No. 18.7.1 2023 (RATE-286.80) |
| 26 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge20 mm nominal dia Pipes-DSR No. 18.7.2 2023 (RATE-335.00) |
| 27 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Internal work Exposed on wall 25 mm nominal dia Pipes DSR No. 18.7.3 2023(RATE-401.55) |
| 28 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 litre white P.V.C. automatic flushing cistern. DSR No. 17.4.1 2023(RATE-6258.75) |
| 29 | Rubbing and polishing of Red sand stone cladding on boundary wall including hand grinder labour and T&P etc required for proper completion of work as per direction of E/I (Analyses attached) (Rate 152.11/Sqm) |
| 30 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade DSR-2023/8.31(Rate 1267.95/sqm) |
| 31 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm DsR 2023/11.41.2 (1553.45/sqm) |
| 32 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm dsr2023/15.23.2(rate-113.35) |
| 33 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. DSR 2023/2.8.1 (Rate 260.30) |
| 34 | Brick work with class 150 class bricks of designation 15 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) (AS per DAR) OR DSR S.I.No. 6.1.1/2023 (Rate 7846.30) |
| 35 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR/2023 S I No 5.1.2 (Rate 9045.75) |
| 36 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR2023/5.3(RATE-11505.50) |
| 37 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more DSR 5.22A.6 |
| 38 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.0mm thickness (weight not less than 10kg/sqm) and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item): DSR2023/21.3.2(RATE-1505.25) |
| 39 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete dsr 2023/ 5.9.1(rate-392.15) |
| 40 | same as item no.38 as above but for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc dsr 2023/ 5.9.2(rate-842.50) |
| 41 | same as item no. 38 as above but for Suspended floors, roofs, landings, balconies and access platform dsr 2023/ 5.9.3, Rate (rate-927.25) |
| 42 | Same as item N0 38 but for Columns, Pillars, Piers, Abutments, Posts and Struts dsr 2023/ 5.9.6 (Rate 961.30) |
| 43 | Supplying and fixing suitable size GI box with modular plate & cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amodular socket outlet and 15/16A modular swithc. connection etc. as required DSR(1.32)/2022A- 100X100X65MM(159/2018) |
| 44 | B- 175X100X65MM(SOR No 161)/2018 |
| 45 | C- 250X200X65MM(Sor-162/2018) |
| 46 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC Insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required 2x1.5 sqmm+1x1.5 sqmm earth wire DSR 2022 (1.14.1) |
| 47 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required 2x2.5+ sqmm +1x2.5 sqmm earth wire DSR 2022 (1.14.2) |
| 48 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire. DSR 2022 (1.14.3) |
| 49 | Supply and fixing of power plug with 20A/250 V flush type modular switch and 5 Pin 20 A/250 Volt flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T & P etc required for proper completion of work. SOR 2018 SI No. cat A 1139 |
| 50 | S/F of surface/Flush mounting 8 way distribution board without MCB complete in all respect as per direction of E/I SOR 2018 S.I. No. cat 1024 |
| 51 | S/F of 6 Amp to 32 Amp SPMCB (10KA) C curve SOR 2018 S.I. No. cat 1002 |
| 52 | Supply and laying 160mm internal dia ISI mared P.V.C. pipe of with all fitting as socket, bend, Tee, Cross etc. complete and including supply of all materials, labour and T&P etc. required for proper completion of the work.(Analyses Attached) |
| 53 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red DSR 2023/11.56.2(RATE-3071.05) |
| 54 | Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete.50 mm long DSR 2023/8.24.4 (29.75 each) |
| 55 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Red sand stone - exposed face fine dressed with rough backing. 30 mm thick DSR 2023/8.14.1.5 (Rate 5295.90 /Sqm) |
| 56 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.DSR 2023 18.48 (RATE-11.00) |
| 57 | Wiring for light point/ fan point/exhaust fan point/ call bell point with 15 sq.mm FRIS PVC insulated copper conductor single core cable in surface recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required Group DSR 2022 (1.10.2) (Rate 1182.00) Please Enable Macros to View BoQ information |
