|
| 1 | Erection of following different type Main and auxiliary structur, columns, beams, peaks, masts ets. Suitable for placing of KV equipments. |
| 2 | Main Structure & Auxiliary Structure. |
| 3 | Erection of following equipments as per Instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily. |
| 4 | 36KV V.C.B. |
| 5 | 36KV BI |
| 6 | 36KV LI |
| 7 | 36KV CT |
| 8 | CT Junction Box |
| 9 | Cutting. strenghtening. Bending. Laying 700mm. Below in side ground and above ground og following size of MS Flat for earthing of main and auxiliary structure. Equipment structure T/F body and its material etc. Including Welding with main earth mat and with object to be earthing / excavation of trenches its back filling. |
| 10 | 75x10mm MS Flat |
| 11 | 50x6mm MS Flat |
| 12 | 25x10mm MS Flat |
| 13 | Provinig, fixing & installation of Glow sign board (As per sample) of size 8ft x 6ft for updated substation Single line diagram duly checked & verified by concerned AE, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of UPPTCL, the glow sign board illumminated using LED tube light in sufficient quantity. The Board shall be made of Acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall. |
| 14 | Interconnection of equipments and bus bar including cutting. Bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn. |
| 15 | Equipment Jumper with 1xMoose,< 10Mtr, 33KV |
| 16 | Bus Bar Jumper with 1xMoose,< 10Mtr, 33 KV, 6M |
| 17 | Laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and JB etc. In switchyard as per cable schedule. |
| 18 | 2C X 2.5 Sq mm. unarmoured. |
| 19 | 4C X 2.5 Sq mm. unarmoured. |
| 20 | 6C X 2.5 Sq mm. unarmoured. |
| 21 | Termination of 2Cx2.5 Sq.MM Unarm.Ctrl.Cable at Both end. as per cable schedule. |
| 22 | Termination of 4Cx2.5 Sq.MM Unarm.Ctrl.Cable at Both end. as per cable schedule. |
| 23 | Termination of 6Cx2.5 Sq.MM Unarm.Ctrl.Cable at Both end. as per cable schedule. |
| 24 | Preparation of cable schedule and case interconnection diagram in between relevant panel,CB,CT,PT,etc.. |
| 25 | Providing and Fixing of LED street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 NOM on 9 Mtr. Long STP/Substation main Structure Column with G.1. pipe bracket complete in all respect Cat. 'A' Philimps Bajaj/ Crompton/Havells or equivalent make including cost of G.1. pipe Brackets and all related accessories. |
| 26 | Supply |
| 27 | Supply of Single Tension Fitting suitable for ACSR Moose as per sample |
| 28 | Supply of Single Suspension Fitting suitable for ACSR Moose as per sample |
| 29 | Supply of 33KV CT clamps suitable for ACSR Moose as per sample |
| 30 | Supply of 36KV isolator jaw as per sample |
| 31 | Supply of Copper Bond 16x500mm |
| 32 | Supply of 33 KV Isolator Clamps suitable for ACSR Moose as per sample |
| 33 | Intregration & Remote Gateway work |
| 34 | Supply of required material with installation and intregration of new 33 KV line control & relay panel with IEC -61850 compliant IED with existing automation system and addition of bay into remote gateway & data validation work. Please Enable Macros to View BoQ information |
