|
| 1 | Excavation in foundation and trenches in all type of soil such as pickwork jumper work Kankar, moorum, shingles including decomposed soft and hard rock etcupto all heights stacking the excavated earth not more than 3mtrs clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundations etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth in all leads and lifts as per the direction of Engineer in-charge. |
| 2 | Providing and laying cement concrete 1:6:12 ( 1 cement : 6 sand :12 graded stone aggregate 40 mm nominal size ) and curring complete excluding cost of form work in foundation and plinth in all heights and depths including all leads lifts and carrige of material at site and as directed by the Engineer Incharge. |
| 3 | Random rubble masonry/polygonal rubble masonery (uncoursed/ brought to courses) with hard stone of approved quality in foundation and plinth levelling up with cement concrete 1 : 6 : 12 (1cement : 6 sand : 12 graded stone aggregate 20 mm nominal size) in cement motor 1: 6 (1cement : 6 sand) in foundation and plinth including carriage of material up to all leads and lifts. |
| 4 | Squared rubble masonery coursed with hard stone of approved quality in foundation and plinth in retaining wall/breast wall including racking out joints in cement mortar 1: 6 (1cement : 6 sand) as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts. |
| 5 | Providing and laying Damp proof course 38mm thick with cement concrete 1:2:4 (1 cement 2 sand 4 graded stone aggregate 12.5mm nominal size) at plinth level and curing |
| 6 | Applying a coat of hot bitumen [mexphalt 80/100 or equivelent using 1.70 kg/sqmtrs on damp proof course after cleanig the surfaces with a piece of cloth lightly soaked with kerosene oil. |
| 7 | 2nd class brick work using common burnt clay building bricks in supper structure in cement mortar 1:6 (1cment:6 sand) 2nd Class bricks including all leads,lifts and carriage of material at site and as directed by the Engineer in Charge |
| 8 | Providing wood work in frames of doors , windows, clerestory windowsand other frames , wrought framed and fixed in position.Second class Deodar wood. |
| 9 | Providing 40x3mm flat iron hold fast 40 Cm long including fixing to frames 10mm diameter bolts and nuts and wooden plug and embended in cement concrete block 30x10x15 Cm.In1:3:6 (1 cement :3 sand :6 gradedstone agg. 20mm nominal size) |
| 10 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish. Including centring,shuttering strutting and propping etc. with wooden battens and ballies height of propping and centring below supporting floor to ceiling not exceeding 4mtrs and removal of the same for insitu reinforced concrete and plain concrete work in:- |
| 11 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like, floors etc., up to 200mm in thickness. |
| 12 | Providing and laying cement concrete 1 :1.5:3 ( 1 cement :1.5sand :3 graded stone aggregate 20mm nominal size ) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in lintels, beams, girders, bressumers, and cantilever, up to floor two level including all leads,lifts and carriage of material at site and as directed by the Engineer in Charge. |
| 13 | Providing and laying reinforced cement concrete work 1:2:4 ( 1 cement :2 sand :4 graded stone aggregate 20 mm nominal size ) excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies beams, girders bressumers and cantilevers upto floor two level in all heights and depths includiing all leads lifts and carriage of material at site and as directed by the Engineer Incharge. |
| 14 | Providing tor steel reinforcement for RCC work including bending,binding and placing in position complete upto floor two level.as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts. |
| 15 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with M.S flasts square or rounded bars with rounded headed bolts and nuts or by screws plain grills. including all leads, lifts and carriage of material and as directed by the Engineer Incharge. |
| 16 | Providing and fixing panelled glazed shutters for doors windows including black enamelled iron butts, hings,with necessory screws in 2nd class deodar/kail wood including all leads, lifts and carriage of material at site and as directed by Engineer in Charge. |
| 17 | Applying a priming coat over new steel and steel based surface after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering and knotting, ready mixed paint brushing red lead , red oxide/ zink oxide chrome including all leads, lifts and carriage of material and as directed by the Engineer Incharge. |
| 18 | Painting one coat (excluding priming coat) on new steel and steel based surfaces with ready mixed paint brushing to give an even shade including clearing of all dirt, dust and other foreign matter sand paper and stopping:- with ready mixed paint other than white, including all leads, lifts and carriage of materials and as directed by the Engineer Incharge. |
| 19 | Applying a priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and knotting, ready mixed paint brushing red lead , red oxide/ zink oxide chrome including all leads, lifts and carriage of material and as directed by the Engineer Incharge. |
| 20 | Painting two coat (excluding priming coat) on new wood and wood based surfaces with ready mixed paint brushing to give an even shade including clearing of all dirt, dust and other foreign matter sand paper and knotting ready mixed paint other than white, including all leads, lifts and carriage of materials and as directed by the Engineer Incharge. |
| 21 | Boulder filling under floor hand packed tightly including all leads , lifts and carriage of material at site and as directed by the Enginner Incharge. |
| 22 | Cement concrete flooring 1:2:4 ( 1cement : sand : 4 graded stone aggregate 20mm nominal size) and laid in one layer finished with a floating coat of neat cement, 50mm thick including all leads lifts and carriage of material at site as as per the direction of the Engineer incharge. |
| 23 | 15 mm cement plastering in single coat on rough side of brick/stone masonary for interior plastering up to floor two level including arrises internal rounded angles of brick/stone masonary for interior plastering up to chamfers, and/or rounded angles not exceeding 80mmin in girth and finished even and smooth in C.M.1:6 (1Cement:6 Sand) |
| 24 | 6mm thick cement plaster to ceiling in cement mortar 1:3 ( 1 cement : 3 sand) including all leads , lifts and carriage of material at site and as directed by the Enginner Incharge. |
| 25 | White washing with lime on undecorated wall surface two coat to give an even shade including throughly brooming the surface to remove all dirt dust and other foreign matter including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge. |
| 26 | Distempering Two coats on un decorated wall surface (two coats) to give an even shade including throughly brooming the surface to removeal of oil grease ,dirt dust and other forgin matter including all leads,lifts and carriage of material at site and as directed by the Engineer in Charge. |
| 27 | Providing under layer 75 mm thick unconsolidated bed dry bricks/stone (40 mm nominal size) including finishing the top surfaces including all leads lifts and carriage of material at site and as directed by the Engineer in Charge. |
| 28 | Providing plinth protection 50mm thick in cement concrete 1:3:6 (1cement;3 sand:6 graded stone stone 20mm size) including all leads lifts and carriage of material at site and as directed by the Engineer Incharge. |
| 29 | Providing stone Kharanja drain 45CM wide/i/c 25CM side stone laid in CM 1:6(1cement:6sand) including all leads,lifts and carriage of material at site and as directed by the Engineer in charge. |
| 30 | Providing and fixing oxidized M.S.sliding door bolts with nuts and serews complete including all leads, lifts and carriage of materials and as directed by the Engineer Incharge.:-300x16mm |
| 31 | Providing and fixing oxidized M.S.tower bolts (barrel type) with nuts and serews complete including all leads, lifts and carriage of materials and as directed by the Engineer Incharge.:- |
| 32 | 250x10mm |
| 33 | Providing and fixing oxidized M.S. handles with necessary screws complete including all leads, lifts and carriage of materials and as directed by the Engineer In charge.:- |
| 34 | 100mm |
