Name of Work:- PROVIDING AND FIXING GALI NO. BOARD & VILLAGE MAP BOARD IN VILLAGE DHANAS, CHANDIGARH.
Sl. No.
Item Description
1
Providing and fixing guide map board made of size 6'x4' fabricated with a frame of MS rectangular pipe of size 96mmx38mm having 2mm thickness the frame further divided with three number in horizontal and four number in vertical position as shown in drawing two number legs of 75mm dia MS pipe having 3mm thickness and 5'-6\\" length having two anchorage piece 1'-0\\" length of MS angle 35mm x35mm x5mm is to be welded at bottom and one angle length 3'-0\\" is to be welded between the two legs below the ground level. 3mm thick aluminium compound panel sheet is to be fixed on front & back side of the frame with screws & adhesive. The high intensity micro prismatic sheet free from scratches of type IV ASTM standard (brand Nikkalite /3M/A very Dennison ) is to be pasted on one side of board, the cost includes overlay duly printed of guide map of Vill Dhanas, 2mm thick sheet of clear polycarbonate is to be fixed on front side of the frame. The whole structure is to be painted with two coats of special quality paint over one coat steel primer duly embedded in ground with cement concrete 1:2:4 block of size 2'x2'x2½ complete in all respect as per Architectural drawing and to the entire satisfaction of Engineer-in-charge
2
Providing and fixing stainless steel 304 grade Gali No board with 4mm thick ACP sheet on both side covered by reflective sheet in Blue colour prismatic high resolution sheet/tape of type XI both side including house numbers in white colour covered by 1.5mm thick polycarbonate sheet fixed with rivets. The gap between polycarbonate sheet and SS pipe must be filled with silicon paste on both side of frame. The sheet is to be fixed in display frame size of 1'-10\\"x1'-0\\" with arrow formation at one side as per drawing in SS pipe of 25mm outer dia (12 gauge) with internal support of SS flat 30 x 3 mm for ACP sheet with proper welding / fixed with rivets as required. The display frame is to be welded with vertical SS pipe of 40mm outer dia (10 gauge) with height of 3'-4\\" feet above ground level and 1'-0\\" below ground level. The rates also includes cost Pits & of 9\\" long anchorage piece of SS rectangular pipe of size 50 x 28mm (14 gauge) embedded in cement concrete 1:2:4 block size of 1'-0\\" x1'0\\"x1'-3\\" complete in all respect to the entire satisfaction of the Engineer-in-charge. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
