|
| 1 | Supplying, Installation, Testing and Commissioning of Air Cooled Hi Wall Split Type Air Conditioners, complete with Indoor unit (IDU), Out door unit (ODU), surface/concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section ) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU ) including drain pipe R-32/R-410/R-407 Green Refrigerant, wireless, Remote control, suitable for working between 180-260V with low & high voltage cutoff and 50 hz, 1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll/rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply: Electrical cable IS 694 or IS 9968 temperature sensing control IS/International Electrotechnical Commission (IEC) 60730, hermetic compressor IS10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS : 12615. Complete as per CPWD specification and IS: 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature). |
| 2 | Inverter Type - Cooling Only |
| 3 | 1.5 TR with 5 star BEE Rating |
| 4 | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making onnections, etc. as required. |
| 5 | 32 A TP&N |
| 6 | Wiring for light/ power plug with 2X4 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required |
| 7 | Manufacturing, Supplying and fixing of MS stand ( Powder Coated ) for Outdoor Unit of Split Type / Cassette Type Air Conditioner including grouting complete to the satisfaction of EIC. |
| 8 | Providing and fixing of UPVC pipe of size 20mm Class 5 for condensate drain including cutting, jointing costing of solvent complete |
| 9 | Providing and fixing of 22 Guage soft/ hard copper piping 3/8\\" & 5/8\\" or as per, OEM Specification. for liquid and sunction sides, between indoor & outdoor units with 6 mm thick nitrile rubber insulation & protective covering for exposed weather including cost of chasing brick wall/RCC wall & repairing to original condition. (The rate per metre includes cost of 1 metre each of both 3/8\\" & 5/8\\" with insulation and other works total line etc.) |
| 10 | Providing and laying of Multicore flexible cable PVC Insulated with Bare Copper Conductor as per IS marked complete including making connection to the satisfaction of EICMake : Havells, Polycab, Finolex or as per approved make list |
| 11 | 2.5 sqmm x 3 Core |
| 12 | Providing and fixing of Voltage Stablizer suitable for 1.5 TR AC Unit 15 Ampere capacity working range 150 VAC to 285 VAC with low and high voltage cut off protection , built in thermal overload protection, digital / analog display for input / output voltage, wall mouted type, with metal cabinet complete of make V-Guard model VND 400 or equivalent model of Deol, Luminous, Microtech |
| 13 | 4 KVA |
| 14 | Providing and fixing PVC channel to cover copper pipe Drain pipe and wire in case of exposed in the wall size 100X50 mm |
| 15 | Supply installation testing and commissioning of surface mounted switch socke box including 3 pin top of rating 16 AMP. Please Enable Macros to View BoQ information |
