|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (Not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up 1.5 m, including getting out the excavated soil and disposal of excavated soil as per direction of site incharge within a lead of 50 m, including all leads and lifts. |
| 2 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 3 | Supplying & filling in plinth with sand under floors, including watering, ramming, consolidation and dressing complete. |
| 4 | Demolishing cement concrete manually by mechanical means including disposal of materail within 50mtr lead as per direction of site incharge. |
| 5 | Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering of ratio 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size). |
| 6 | Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering of ratio 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size). |
| 7 | Providing & filling in position, blown bitumin in expansion joints. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for :Edges of slabs and breaks in floors and walls under 20 cm wide., beams, plinth beams, girders, bressumers and cantilevers |
| 9 | Demolishing brick work manually by mechanical means including stacking of servicabel material and disposal of unservicable materail within 50mtr lead as per direction of site incharge. |
| 10 | Brick work in foundation and plinth of class designation 7.5 in cement mortar ratio 1:4 (1 cement: 4 coarse sand). |
| 11 | Raking out joints in cement mortar and prepairing the surface for re-plasstering including disposal the rubbish upto distance of 50mtr as per direction of site incharge. |
| 12 | 12 mm cement plaster of mix 1:6 (1 Cement : 6 Coarse Sand) |
| 13 | Providing and fixing Galvanized M.S. angle 75x75x6 (3 mtr length 45 pcs), 40x40x5 (250 mtr length) for proper erection 125 meter chain link fencing including cutting, drilling, bending and welding works. |
| 14 | Providing and fixing M.S. flat 75x6 (2 mtr length 45 pcs), 40x5 (250 mtr length) for proper erection 125 meter chain link fencing including cutting, bending and welding works. |
| 15 | Providing & layig 50x6 G.I. M.S. Flate for proper earthing of different equipments installed at 132kV Switchyard. |
| 16 | Providing square M.S pipe size 100x100x4 mm for shade of vehicle parking at 132kV Substation Kotdwar. |
| 17 | Providing square M.S pipe size 25x25x2.5 mm for making structure with fixed corrugated galvanized iron sheet. |
| 18 | Febricating the angle/pipe and flat including cutting, bending, shapping and connecting with existing earthing with welding in proper way for safety of equipments installed at switchyard. |
| 19 | Providing & fixing industrial grade M.S. roofing colour coated sheet (22 gauge) including specified screw/j bolt including cost of labour. |
| 20 | Providing and fixing of chain link febric fencing mesh of size 50x50 mm made of G.I. wire of dia 4 mm. |
| 21 | Properly cleaning rust/corrosion/creeper & other unwanted materials on the angles/flats/mesh with the help of emery paper/wire brush of chain link security fencing appr. height of fencing 2.45 Mtr. |
| 22 | Painting of two coat of synthetic enamelled smoke gray paint of approved quality & branded (Asian/Burger only) on both faces/MS angle/MS flat/Stay/Raiser etc. of security fencing and aluminium paint of approved quality & branded (Asian/Burger only) on complete surface. |
| 23 | Strengthening and repairing of chain link fencing of switch yard including welding work, replacement of damage nut, bolts, strip etc. appr. height fencingof 2.45 Mtr. |
| 24 | Providing & laying factory made chamfered edge cement concrete paver blocks in front of AE office area of required strength, thickness & size/shape made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bad of sand, compacting and proper embadding/laying of inter locking paver blocks in to the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver block in required size & pattern, finishing and sweeping extra sand, complete all as per direction of site incharge.80 mm thick C.C. Paver blocks of M-35 grade with approved colour, design and pattern Please Enable Macros to View BoQ information |
