Tender For Providing Of 01 No Type-Vi Accn At Timarpur Under Ge (I) R&D Delhi
Tender Value
1.24 Crore
Estimated cost
Bid Submission
16 Jul 2026
9 days left
EMD
1.99 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of 01 No Type-Vi Accn At Timarpur Under Ge (I) R&D Delhi
BOQ
| Sl. No. | Item Description |
| 1 | Lump Sum BoQ_Ver4.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: HQ CHIEF ENGINEER (R&D) DELHI Name of Work: PROVN OF 01 NO TYPE-VI ACCN AT TIMARPUR UNDER GE (I) R&D DELHI Contract No: CE R&D/DLI-08/DLI/2026-2027 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE (GENERAL SUMMARY)(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Items Item Code / Make Quantity Units Estimated Cost Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures including all taxes & cesses to be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT INCLUDING ALL TAXES AND CESSES TOTAL AMOUNT In Words Represent (%) having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES |
| 2 | Schedule 'A' Section-I under Ser No. 2.00 prepriced by MES on DSR - 2023 |
| 3 | Lump sum price worked out by the Contractor for \\"BUILDING WORK\\" as listed in Schedule 'A' Section-I. |
| 4 | Lump sum price worked out by the Contractor for “SITE CLEARANCE, EXCAVATION AND EARTH WORK” as listed in Schedule ‘A’ Section-II. |
| 5 | Lump sum price worked out by the Contractor for “HARDSTANDING” as listed in Schedule ‘A’ Section-III. |
| 6 | Lump sum price worked out by the Contractor for “SEWAGE DISPOSAL” as listed in Schedule ‘A’ Section-IV. |
| 7 | Lump sum price worked out by the Contractor for “AREA DRAINAGE” as listed in Schedule ‘A’ Section-V. |
| 8 | Lump sum price worked out by the Contractor for “COMPOUNDWALL” as listed in Schedule ‘A’ Section-VI. |
| 9 | Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Section-VII. |
| 10 | Lump sum price worked out by the Contractor for “EXTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Section-VIII. |
| 11 | Lump sum price worked out by the Contractor for “INTERNAL ELECTRIFICATION\\" as listed in Schedule ‘A’ Section-IX. |
| 12 | Lump sum price worked out by the Contractor for “GEYSER (HOT WATER SUPPLY)” as listed in Schedule ‘A’ Section-X. |
| 13 | Lump sum price worked out by the Contractor for “EXTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Section-XI |
| 14 | Lump sum price worked out by the Contractor for “DEMOLITION” as listed in Schedule ‘A’ Section-XII. |
| 15 | SCHEDULE `A' SECTION - XIII MISC ITEMS Ser No. 14.00 to 47.00 (Not are prepriced by MES ) |
| 16 | SEWAGE DISPOSALProviding and laying DWCPE OD 200 MM (SN-8) Over prepared bed complete all as specified and directed by Engr-in-charge. |
| 17 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 150 mm diameter, 1.8 m long With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 complete all as specified and directed complete as per standard design and drawing |
| 18 | RCC Septic tank conventional tyoe designed for 50 users to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter complete all as specified and directed as per drawing |
| 19 | COMPOUNDWALLM&L Wall cladding ceramic tiles (outdoor type) n exc 0.36 Sqm stone series on exterior wall surface design and size as approved by GE as in vertical surfaces of walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement plaster (In fine sand) 15 mm thick in CM 1:4 (1 cement: 4 fine sand) complete all as specified and directed. |
| 20 | Providing and fixing concertina coil fencing with punched tape concertina coil 900 mm dia 10 metre openable length having 50 nos rounds per 6 metre length, placed on upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart all complete as per direction of Engineer-in-charge. |
| 21 | Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 6 mm nominal size ), 50mm thick, reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits |
| 22 | INTERNAL WATER SUPPLYProviding and fixing chrome plated bathroom shower mixer set premium variant consisting of wall mounted concealed body with single lever operation and 3-way diverter complete with exposed lever and button assembly, wall flange, seals and concealed body for switching between overhead shower/hand shower/spout, chrome finish, brass body, complete all with necessary fittings and accessories, tested and commissioned as per direction of Engineer in Charge. |
| 23 | Providing and fixing Single lever 2-way hot & cold water diverter suitable for WHB assembly with concealed body of approved make, chrome plated brass body ,high flow including all necessary wall flange, seals, fittings, nuts , washer, connection pipe, cp flanges and concealed body for switching between hot and cold water all tested and commissioned as per direction of Engineer in Charge. |
| 24 | Providing and fixing chrome plated brass body kitchen sink mixer premium variant with single lever operation for hot and cold water, swivel/ gooseneck spout, cartridges, aerator, powder coated flexible inlet hoses, complete all with necessary fittings and accessories, tested and commissioned as per direction of Engineer in Charge. |
| 25 | Providing and fixing Soap dish, chrome plated brass with frosted glass dish, complete with wall mounted brackets, concealed screws, rawl plugs, fasteners, omplete all with necessary fittings and accessories as per direction of Engineer in Charge. |
| 26 | Providing and fixing Towel rail, chrome plated brass body with length 450mm , complete with wall mounted brackets, concealed screws, rawl plugs, fasteners, complete all with necessary fittings and accessories as per direction of Engineer in Charge. |
| 27 | Providing and fixing Towel ring, high quality chrome plated brass body with 170 to 180 mm inner dia, complete with wall mounted brackets, concealed screws, rawl plugs, fasteners, complete all with necessary fittings and accessories as per direction of Engineer in Charge. |
| 28 | Providing and fixing towel rack, wall mounted type, fabricated from high quality brass tubing with chrome plated finish, of approved size 600 mm long or as required with top shelf and bottom hanging rail, including concealed mounting brackets, screws, rawl plugs, fasteners and all necessary accessories, fixed in position and making good the wall surface complete in all respects as directed by the Engineer-in-Charge |
| 29 | Providing and fixing fancy type wall mounted looking mirror with LED light of size 600x800mm made of high quality float glass mirror of minimum 5mm thickness with polished edges , mounted on moisture resistant backing board, complete with inbuilt LED strip lighting, diffuser, driver, wiring , necessary electrical connections complete all with necessary fittings and accessories as per direction of Engineer in Charge. |
| 30 | Providing and fixing SS304 ,100mm dia round floor drain with dome type grating, sealing , embedding in floor including cutting and making good the floor as per direction of Engineer in Charge. |
| 31 | Providing and fixing premium quality overhead shower rose, round / square type, size 200mm of approved make made of high quality stainless steel / brass with chrome plated finish, complete with swivel joint, rubber nozzles (anti-clog), connection to shower arm, necessary fittings and accessories, fixed in position, tested and commissioned complete in all respects as directed by the Engineer-in-Charge. |
| 32 | Providing and fixing 3-tier corner shelf of approved design, made of toughened glass minimum 8 mm thick with stainless steel / chrome plated brass brackets, suitable for bathroom use, including wall mounting hardware, screws, rawl plugs, sealing and making good the wall surface, complete in all respects as directed by the Engineer-in-Charge. |
| 33 | Providing and fixing PVC braided flexible connector 15 mm nominal bore of 60 cm length suitable for hot and cold water supply, with stainless steel outer braiding and high quality inner PVC tube with brass threaded end fittings with brass unions complete as per direction of Engineer in Charge. |
| 34 | Providing and fixing toilet paper holder of approved make, manufactured from high quality brass with superior chrome plated finish, wall mounted type with concealed fixing arrangement, complete with mounting brackets, screws, rawl plugs, fasteners and all necessary accessories, fixed in position and making good the wall surface complete in all respects as directed by the Engineer-in-Charge. |
| 35 | Providing and fixing central hole basin mixer, single lever type, made of high quality brass with chrome plated finish, suitable for hot and cold water supply, complete with ceramic cartridge, aerator, flexible inlet connections, nuts, washers, mounting hardware and all necessary fittings, fixed in position, tested and commissioned complete in all respects as directed by the Engineer-in-Charge |
| 36 | EXTERNAL ELECTRIFICATIONSupply, Fixing & testing LED Street light fitting, 90 watt with lumen efficiency > 130 lm/watt, comprising of corrosion free high pressure die cast aluminium housing with smooth finish poer coated and heat sink extrunded aluminium diffuser and polycarbonate optics/lense with toughened glass in as separate driver Input voltage: 140-270 Volt AC, frequency 50 hz, Operating temp range - 5°C to 50°C internal surge protection of 5 KV, Driver efficiency > 85% THD < 10%, P .F. >0.95. IP-66,IK-08, CRI > 85 under voltage and over voltage protection, suitable to fit in up to 65mm dia pipe, life time of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM 79 & LM80 report, CCT 3000°K 4000 /5700/6500 deg . Maximum power consumption should not more than the specified rating with Minimum 5 year OEM warranty complete all as specified and directed. |
| 37 | S&F bollard light cone series Tulip type act as an imposing street furniture a silient observed, diffuser at the upper portion adds functional value with IP-65 with in built 9 watt LED, 5700K and connected with all fixing accessories including foundation, nuts bolts etc complete all as specified and directed. |
| 38 | Boring holes under road, pavemnet, hard standing by trencheless technology using ultra sound technique and necessary machine icluding HDPE pipe of 0.4 mpa working pressure suitable upto 80mm dia GI/DI/CI pipe Crossing complete all as specified and directed. |
| 39 | M&L for Cutting of existing road/PCC/RCC/hard standing for laying of pipe upto 80mm dia including making good the disturbed surface to match with the adjoining surface with PCC 1:3:6 C2 complete all as specified directed. |
| 40 | Supply and erection of steel tubular swaged poles 9 mtr long type 410SP-31, made out of MS with base plate single arm swan neck bracket (1.5 mtr long) confirming to IS- 2713-1980 duly painting with two coat of silver white aluminium paint over a coat of black bituminus primer throughout internally and externally and marking pole number, size of number shall be as approved by EIC including taking down old rusted pole any size complete all as specified and as directed. |
| 41 | Supply. fixing and testing tamper proof,weather proof,shock proof,dust and vermin proof street light pole SMC/FRP junction box (KIOSK) with IP-66 protection of size 300x200x105 mm duly fitted with copper terminal connector 100A 4 pole and MCB SP 6 Amps, 'c' curvE 01 No suitable for in and out connection of 4 core cable fixed on pole with GI clamps 02 Nos, GI nuts,bolts and washers complete all as specified and directed. |
| 42 | Supply, installation testing and commissioning in replacement of outdoor type LT Panel of size 600x600x450mm (appx) factory made CRCA sheet 3.15 mm thick (shock proof, rust free, corrosion free, dust proof, acid and chemical resistant, fire retardant, having high impact, made of halogen and silica free, recyclabel material ) UV resistant, having high grade gasket made of polyurethane, should withstand glow wire test at 96ºC should be flame retardant. The LT panel should be as per CPRI certification IP-67 with switchgear assemblies as per IEC 60439 Part-1 & 2. The LT Panel mounted on angle iron frame of size 50 mmx 50 mmx6mm thick including 60 CM height from Ground Level and necessary PCC work 1:2:4 are deemed to be included in the quoted rate complete with multifunctional meter, Phase indicator LED Lamp for RYB phase having front opening Door with padlock and suitable to accommodate the following :- (a) Main incommer : MCCB 125 Amps 4 pole with thermal megnetic release based,100% ICS=100% ICU, 36 KA, -01 No. (b) All Busbar 250 A 4pole with colour coated Heatshrink sleeve with DMC insulator -01 Set(c) Outgoing : MCCB 100 Amps 4 pole with thermal megnetic release based,100% ICS=100% ICU, 16 KA, -02 No(d) Outgoing : MCB 63 Amps, 'C' curve, TPN -02 No(e) Astronomical/digital timer switch, 3phase, 415 V, 50 Hz-01 NOs (f) Indicator RYB LED type.(g) Power Contactor 3 Pole 415 Volts MNX 70A-03 Nos(h) Auto mannual selector switch - 03 No.(j) Danger notice Plate duly rivetted on front - 01 No(k) Panel internal wiring for control circuit with copper cable 2.5 Sqmm FRLH.(l) Earth terminal - 02 Nos Note - Before fabrication of panels the contractor shall be submit detailed general arrangement drawing and single line diagram of all panel for approval. The drgs shall also show foundation details, list of components in the manufacturer's reference & bill of materials. |
| 43 | Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for 4x16 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required complete all as specified and directed. |
| 44 | Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 66/67 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed. |
| 45 | Supplying and laying unreinforced precast concrete cable cover class LV type I flat of size 250x150x40mm for protection of cable in trench to be laid width wise complete all as specified and directed. |
| 46 | GEYSER (HOT WATER SUPPLYSupply and fix modular metal enclosure with 20A SP MCB, 'C' curve, 230volt, 50Hz box & unbreakable heavy duty with ISI plug top recessed in wall complete all as specified and directed |
| 47 | Supply, fixing and commissioning water heater storage type 25 litres capacity, BEE 5 star and 8 bar pressure rated, with feroglass coated inner container energy saving high density PUF insulation vertical, Adjustable knob for setting the temprature ,shock safe plug to prevent electric shocks by cutting off the power in case of current leakage,2000 watt rating grouting of studs in wall in cement mortar (1:3) nuts, washers, provision of two numbers PVC braided connection 450 mm long heavy duty with brass nuts and two numbers brass chromium plated angular valve with wall flange suitable for 15mm bore pipe for water supply connection complete all as specified and directed. |
| 48 | EXTERNAL WATER SUPPLY M&L for boring of holes under road, pavement, hard standing by trenchless techonology using ultra sound technique /mannually/ mechanically and necessary machine including supply and laying of 100mm dia HDPE/GI pipe complete all as specified and directed. Total in Figures 0.0 0.0 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender