|
| 1 | Supplying & installation of required capacity of single phase,50Hz,220V, deepwell submersible pump stainless steelbody, as per IS of approved make, suitablefor4\\"/6\\" tubewell with control panel startersuitable for submersible pump with dry run protection, connections, including clamp, borecapetc. as requiredasper specificationsbut excluding pipe, SS/Nylon wire rope and connection cable. 2HPwith20-22stages,headmetre147-42,dischargeLPM15-55pwd sor no. 39.1.12/101 |
| 2 | Supplying and laying of submersibleflatcable ISI marked3 corecopperwireof suitablesizewithproper clamping of approved make. 2.5 sq.mm multi strandpwd sor no. 39.3/102 |
| 3 | Supplying and laying of approved make nylonrope12mm thick complete with binding for support of pump and motor.pwd sor no. 39.5/103 |
| 4 | Supplying and laying of approved make HDPE pipe as per IS:4984 and IS:14333 with latest amendment for installation of submersible pump with necessary connection, socket/couplings, tees, etc. as required(PE-63& working pressure 6 kgf/sq cm)32 mm Outer Diapwd sor no. 39.4/102 |
| 5 | Dismantling of cement concrete pavement i/c breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead upto 1000 meter, stacking serviceable and unserviceable materials separately and as per relevant clauses of section-200. UADD SOR VOL. - I 2nd Aug. 202118.12/229 |
| 6 | Earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom, dressing of sides, disposal of excavated earth including of all lift and lead upto 50m. Disposed earth to be levelled and neatly dressed All kinds of ordinary soil18.2.1/P-227 |
| 7 | Filling by available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.18.2.8/P-228 |
| 8 | Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate 18.14.3/P-229 |
| 9 | Providing laying and jointing of galvanised Iron Pipes with specials (such as bends, elbows, tees etc) class light, medium & heavy including testing of joints, cost of pipes, specials and jointing materials all complete./Medium6.1/P-88 |
| 10 | 15mm dia |
| 11 | 50mm dia |
| 12 | Providing and fixing full way gate valves tested to 21.00 kg/sq.cm./Screwed6.3/P-88 |
| 13 | 15mm dia |
| 14 | 50mm dia |
| 15 | Providing and fixing class-I Globe wheel valves, tested to 21.09 kg/sq.cm./Screwed6.5/P-89 |
| 16 | 15mm dia |
| 17 | 50mm dia |
| 18 | Providing and fixing gun metal/ brass check (non-return) valves Class-II, female ends, tested to 21.09 kg/sq.cm./Screwed6.8/P-90 |
| 19 | 15mm dia |
| 20 | 50mm dia |
| 21 | Providing & fixing water taps/Stainless Steel 15mm dia6.17.1/P-92 |
| 22 | Providing and fixing G.I. Union in G.I. pipe line including cutting and threading the pipe and making long screws etc complete (new work) :6.22/P-93 |
| 23 | 15 mm diameter pipe. |
| 24 | 50 mm diameter pipe. |
| 25 | Providing and fixing G. I. socket in G.I. Pipe line i/c cutting threading testing etc. complete (Old work)6.25/P-94 |
| 26 | 15mm dia |
| 27 | 50mm dia |
| 28 | Providing and fixing G. I. Bend 90 degree in G.I. Pipe line i/c cutting threading testing etc. complete (Old work)6.27/P-95 |
| 29 | 15mm dia |
| 30 | 50mm dia |
| 31 | Providing and fixing G. I. Tee in G.I. Pipe line i/c cutting threading testing etc. complete (Old work)6.29/P-96 |
| 32 | 15mm dia |
| 33 | 50mm dia |
| 34 | Providing and fixing G. I. Elbow in G.I. Pipe line i/c cutting threading testing etc. complete (Old work)6.31/P-96 |
| 35 | 15mm dia |
| 36 | 50mm dia |
| 37 | Providing and fixing G. I. Nipple of minimum length 100mm in G.I. Pipe line i/c cutting, threading, testing and carriage etc. complete (Old work)6.33/P-97 |
| 38 | 15mm dia |
| 39 | 50mm dia |
| 40 | Providing and fixing wrought steel Cap Plug with threading in G.I. Pipe line testing etc. complete (New & Old Work)6.35/P-98 |
| 41 | 15mm dia |
| 42 | 50mm dia |
| 43 | Providing and fixing G. I. Cross with outer threading in G.I. Pipe line i/c cutting threading testing etc. complete6.37/P-98 |
| 44 | 15mm dia |
| 45 | 50mm dia Please Enable Macros to View BoQ information |
