|
| 1 | Pre cleaning of Redial gate & Gantry crane components & Hoisting parts, removing of honeycombs, removing sand and dust particles from gear system and gate parts, removing & cleaning of old grease & cleaning of gate arm, beam, trunion,lifting Beam and other parts from animal remains etc., degreasing of de-rusting of gate motor, gate parts and hoisting including material required,Transportation, T & P etc. and labour complete for work. for Pre Cleaning Work {4 Labour ( 2 semiskilled &2 unskilled) |
| 2 | Providing and fitting/replacing gear oil of approved quality up to the required gauge level for reduction gear unit of hosts/gantry cranes including cost of all materials, machinery, labour etc complete.320 NO. |
| 3 | Providing and applying grease of approved quality to gate and hoist components requiring greasing as part of annual maintenance using grease gun wherever necessary including cost of all materials, machinery, labour, scaffolding etc. complete.SERVO Grease |
| 4 | Providing and applying cardium compound of approved quality to wire ropes of hoists/ gantry cranes as part of annual maintenance including cost of all materials, machinery, labour etc. complete.Lubrication On Wire Rope Of Radial Crest Gate By Ca.R.Dium Compound Servo Super Coat 140 Grade. |
| 5 | Providing and supplying of De-greasing / de-rusting phosphate coating Chemical (for parasdoh gates ) |
| 6 | Zinc rich ( zinc content : 85 -90%) epoxy primer paint |
| 7 | Epoxy Thiner for Industrial paints-(Berger -844 or equivalent) |
| 8 | Black bituminous Black paint Berger or equivalent. |
| 9 | Post cleaning work after oiling, Greasing and compounding work of radial crest gates , gantry crane, lifting beam etc. work Includes cost of materials. Labour. Transportation, T & P. for Radial gates {6 Labour ( 2skilled 2 semiskilled &2 unskilled) |
| 10 | Welding by gas or electric plant including transportation of plant at site etc. complete. |
| 11 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 13 | painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. |
| 14 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: One or more coats on old work. |
| 15 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 16 | Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete : 100x75x3.50 mm |
| 17 | Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 125 mm |
| 18 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: 300x16 mm |
| 19 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm |
| 20 | Providing and Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. 1.0 mm thick. |
| 21 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x5mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece. |
| 22 | Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 23 | Welding by gas or electric plant including transportation of plant at site etc. complete. |
| 24 | Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge. 10x60 mm |
| 25 | Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S. Flat 15x3mm and nuts and bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. |
| 26 | Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete. With 4.0 mm thick glass panes |
| 27 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 28 | Wall painting by any mechanical or manual means with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade. |
| 29 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 30 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required. (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) |
| 31 | Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5 mm depth and 5 mm width . |
| 32 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) |
| 33 | Providing and fixing 50 micron thick reflective one way type heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in- charge of approved brand and make. |
| 34 | Coupling to be manufactured as per sample/specimen. This includes fabrication,fitting, machining, supply, erection, testing of floating shaft Flange Coupling with Key for Drum Lifter as per relevant IS Codes, etc., complete including cost of all materials, machinery, labour, cutting, aligning, welding, finishing, cleaning, tools and tackle along with all accessories for operating gates, application of two coats of Zinc Chromate Red Oxide primer and three coats of approved synthetic enamel paint etc., as per specifications and approved drawings, including packing and forwarding, transportation charges for all materials, and providing and fixing bolts with nuts and washers of required sizes. |
| 35 | Providing and fitting of worm reduction Gear unit oil seal (1 no.) and oil level indicator at dam site. as per required size and standard of worm reduction gear unit.And removing of old /dameged oil seal (1 no.) and oil level indicator.Rates including cost of all materials, machinery, labour, cutting, aligning, finishing, cleaning, tools, and tackles. and also include opening and fitting of Gear unit parts and whole assmbly as required complete the work as per specifications and approved drawings, including packing & forwarding, transportation charges for all materials. |
| 36 | providing and fitting of electromagnetic brake unit brake shoe lining/pads at dam site.and removing of old lining/pads. as per required size of electromagnetic brake unit.To make brake shoe lining/pads perfect Engage and disengage in working condition etc. including cost of all materials, machinery, labour, cutting, aligning, finishing, cleaning, tools and tackles.complete the work as per specifications and approved drawings, including packing & forwarding, transportation charges for all materials.(2 no.shoe lining/pads =1 unit) |
| 37 | Providing of High tensile MS Nut Bolts of required size and type, as per specifications with testing, including all lead and lifts, packing and forwarding transportation charges for all components. |
| 38 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil |
| 39 | Providing and laying in position specified grade of reinforced cement concrete (nominal / design mix with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : M-15 Grade Concrete |
| 40 | Providing and fixing ISI marked 85x42mm oxidised M.S. pull bolt lock conforming to IS: 7534 with necessary screws bolts, nut and washers etc. complete |
| 41 | scrap material Please Enable Macros to View BoQ information |
