|
| 1 | Oiling, Greasing work of gate parts like Headstock, Headstock parts, Roller Assembly, Operating Rod, Sealing Frame, Guide Tee with all labour tools and tackles etc. and materials for vertical lift sliding type fix wheel gates. for gates size up to 1.0 m x 1.0 m |
| 2 | Oiling, Greasing work of gate parts like Headstock, Headstock parts, Roller Assembly, Operating Rod, Sealing Frame, Guide Tee with all labour tools and tackles etc. and materials for vertical lift sliding type fix wheel gates. for gates size above 1.0 m x 1.0 m |
| 3 | Providing, fabrication, machining with straightening work of Guide Tee, Track, Sealing frame, Leaf frame or any part of gate's, complete as per drawing with testing, including cost of all materials, with machinery, labour, tools and tackles cutting, aligning, welding, finishing, cleaning, etc., applying one coat of zinc rich epoxy primer and two coats of cold applied coal tar epoxy paint, etc., complete as per specifications and approved drawings with all lead and lifts, including packing and forwarding, transportation charges for structural steel components and other materials.Rate of work without material frame angle (50x50x6mm, 4.5 kg/m) For Imlidhana tank gate 1 (1.2mx 2sidex 2+1.2m)x 4.5 kg/m = 27 kg , gate leaf (8mm thik, 62.8kg/sqm) = 1.2x1.2x62.8 kg= 90.432 kg, For gate no. 02 (0.6m x2x2+0.6) x 4.5kg/m= 13.5 kg, total = 130.932 kg say = 131kg |
| 4 | Providing fabrication and fitting work of stainless steel flat on embedded parts (on departmental section, only MS section given by department) of gates with testing, including cost of all materials (SS flat and welding rods etc.), machinery, tools and tackles, labour, cutting, aligning, welding, finishing, cleaning, applying two coat of cement primer etc., complete as per specifications and approved drawings, including packing and forwarding, transportation charges for structural steel components and other materials. for imlidhana tank gate no. 01 ss flat (50x6mm, 2.4 kg/m) 1.2x2x2side+1.2x2 =7.2 mtr x 2.4 kg/m = 17.28 kg say 18 kg |
| 5 | Providing, fabrication, threading (Square and V threading as required), machining, straightening of MS Round bar complete as per drawing with testing, including cost of all materials, with machinery, labour, cutting, aligning, welding, finishing, cleaning, etc., complete as per specifications and approved drawings with all lead and lifts, including packing and forwarding transportation charges for structural steel components and other materials.Rate for single start square threading/straightening for 56 mm dia/50 mm dia /45 mm dia round bar without materials. 45mm dia rod of imlidhana tank gate size 0.6mx0.6m up to 6m |
| 6 | Providing and fixing work of head stock chuck nut of required size (for M70/M75/S36 type headstock) complete work at site. for imlidhana gate no. 02- 1 no. |
| 7 | Providing of gate operating handle for screw Jack hoisting complete work at site. for imlidhana tank gate- 1 no. |
| 8 | providing, fabrication, machining and fixing work of structural Steel component such as I beam, MS channel, MS angle, shaft, chequered plate etc) for repair work of gate leaf, frame, hoist bridge, embedded parts at site as required including all material at site. angle size (65x65x6mm, 5.8 kg/m) for frame support 0.6x2x2x5.8=13.92 kg say 14 kg |
| 9 | welding and machining work of any parts of gate as required on site or as directed by site incharge including transportation charges T&P (welding machine, generator set) labour charges ( 1 welder, 1 formen, 2 helper) etc complete work at site. |
| 10 | providing and fixing work of heavy duty gate pin of required size for connecting spindle rod to the gate complete work at site for imlidhana tank gate - 1 no. Please Enable Macros to View BoQ information |
