Name of Work:- REPAIR/MAINT OF SOLAR LIGHTS, HIGH MAST LIGHTS, UPS AND CONNECTED ITEMS IN A A BANAR UNDER GE BANAR
Sl. No.
Item Description
1
Taking out old unsv solar light of any cap and supply, fixing Testing and Commissioning of all in one Solar LED Street Light Fixture of 60 Watt in Single Piece Extruded Aluminum Housing IP-65 IK. The All in One Solar LED Street Light Fixture must encases with Solar PV Panel of Capacity 60Wp Mono Crystalline at PSH 4hrs, Battery type and Size - 12.8V-24Ah (LiFePO4), Luminance Efficacy > 150 lumens/Watt , CRI > 70, Dimming Facility With PIR Sensor Which works as Follows - 1st 1 Hrs on motion 100% and without 25% brightness next 4 Hrs on motion 40% and without 25% brightness next 6 Hrs 25% irrespective of motion final 1 Hrs on motion 40% & without 25% (Till Dawn Condition). CCT - 5700 to 6500 K. The Charge controller cum driver Must be MPPT Charge Controller with silicon potted ( Potted Type ) with Efficiency (of the electronics) > 90%, Duty Cycle - Dusk to Dawn (12hours) and other safety features like - External switch (IP-66) to On/Off , Protections for reverse flow of current through the PV Module, Battery Overcharge & deep discharge cut off. Make- Crompton Cat Part No CSOP-835-60-57-HL5-FD-LM-PG or equivalent in Wipro/ Philips/Havells
2
Taking out old unsv solar light of any cap and supply, fixing Testing and Commissioning of all in one Solar LED Street Light Fixture of 40 Watt in Single Piece Extruded Aluminum Housing IP-65 IK. The All in One Solar LED Street Light Fixture must encases with Solar PV Panel of Capacity 60Wp Mono Crystalline at PSH 4hrs, Battery type and Size - 12.8V-24Ah (LiFePO4), Luminance Efficacy > 150 lumens/Watt , CRI > 70, Dimming Facility With PIR Sensor Which works as Follows - 1st 1 Hrs on motion 100% and without 25% brightness next 4 Hrs on motion 40% and without 25% brightness next 6 Hrs 25% irrespective of motion final 1 Hrs on motion 40% & without 25% (Till Dawn Condition). CCT - 5700 to 6500 K. The Charge controller cum driver Must be MPPT Charge Controller with silicon potted ( Potted Type ) with Efficiency (of the electronics) > 90%, Duty Cycle - Dusk to Dawn (12hours) and other safety features like - External switch (IP-66) to On/Off , Protections for reverse flow of current through the PV Module, Battery Overcharge & deep discharge cut off. Make- Crompton Cat Part No CSOP-833-40-57-HL5-FD-LM-PG or equivalent in Wipro/ Philips/Havells
3
Supply & Fixing in replacement of LED flood light fitting 200 watt elegently designed, pressure die cast aluminium housing in power coated finish IP-66, lumen efficancy >= 130 lm/watt and total lumens output must be = 26000 lumens or more, operating voltage range 120- 270, P.F > 0.95, CCT- 5700K, surge protector of 10 KV in/out side fitting, driver of fitting shall be potted type only for vibration proof performance with inbuilt surge protector, over voltage protection. both fixture and driver must have separate BIS marked registration with clearly mentioned on fixture & as well as on driver seperately.The manufacture of the LED fitting shall have in house NABL accrediated LAB & contractor shall furnish same along with LM-79, LM-80, test report etc including making connection with 3 core x 1.5 FRLSH wire, all as per directed by Engr in Charge. Make Crompton Cat Part No EFS-532-200-857-NL-HL2-NS-LM-NTG or equivalent in Phillps/Havells/Wipro Please Enable Macros to View BoQ information
4
Supply & Fixing in replacement of LED flood light fitting 200 watt elegently designed, pressure die cast aluminium housing in power coated finish IP-66, lumen efficancy >= 130 lm/watt and total lumens output must be = 26000 lumens or more, operating voltage range 120- 270, P.F > 0.95, CCT- 5700K, surge protector of 10 KV in/out side fitting, driver of fitting shall be potted type only for vibration proof performance with inbuilt surge protector, over voltage protection. both fixture and driver must have separate BIS marked registration with clearly mentioned on fixture & as well as on driver seperately.The manufacture of the LED fitting shall have in house NABL accrediated LAB & contractor shall furnish same along with LM-79, LM-80, test report etc including making connection with 3 core x 1.5 FRLSH wire, all as per directed by Engr in Charge. Make Crompton Cat Part No EFS-532-200-857-NL-HL2-NS-LM-NTG or equivalent in Phillps/Havells/Wipro Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
