Tender For special Repair For Replacement Of Joinery Along With Associated Wk In Offrs/Jcos/Ors Md Accn At Ratnuchak Mil Stn Under Ge Kaluchak
Tender Value
37.86 Lakhs
Estimated cost
Bid Submission
09 Jul 2026
0 days left
EMD
75700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kaluchak → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair For Replacement Of Joinery Along With Associated Wk In Offrs/Jcos/Ors Md Accn At Ratnuchak Mil Stn Under Ge Kaluchak
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Jun-2026 | Corrigendum No 1 | BOQ | 02-Jul-2026 |
| 2 | 02-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames (without taking off shutters from the frame) exceeding 1.5 Square Meter but not exceeding 4 Square Meter each and removing from site complete all as specified.( The distrubed surface during taking down shall be made good by the contractor without any extra cost for fixing new one of any description. No extra cost is permissible for the material and labour for making good the disturbed surface) complete all as specified and directed. |
| 2 | Taking down chowkhats or frames ( without taking down shutters from the frame) not exceeding 1.5 Square Meter each and removing from site complete all as specified.( The distrubed surface during taking down shall be made good by the contractor without any extra cost for fixing new one of any description. No extra cost is permissble for the material and labour for making good the disturbed surface) complete all as specified and directed. |
| 3 | Taking down shutter of any description, exceeding 1 square metre and not exceeding 2 square metre each, all as specified and directed. |
| 4 | Taking down shutter of any description, not exceeding 1 square metre each, all as specified and directed. |
| 5 | S&F 30mm thick, flush shutters, soild core construction, with block board core and plywood face panels commerical type both faces with lipping/frame to match complete all as specified & directed. |
| 6 | S&F Solid PVC door/cup board frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening complete all as specified & directed. |
| 7 | S&F Factory made solid panel PVC door/cup board shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, suippling and fixing in the frame at site as per specification in SSR Part-I complete all as specified and directed. |
| 8 | S&F for 125x 65 mm Factory made wood polymer composite (WPC) solid door /window/ceosetory windows and other frames or Chowkats comprising of vergin PVC polymer of K value 58-60 (Suspension grade),calcium carbonate and natural fibers ( wood powder /rice husk/wheat husk and non toxic additieves (maximum toxicity index of 12 for 100 grams fa bricated with miter joints after applying PVC solvent cement and screwed with fullbody threaded star headed SS screws having minimum frame density of 750 kg /cum/ screw withdrawal strength of 2200 N (face) and 1100 N (Edge) minimum compressieve strength of 58 N/mm^2, modules of elasticity 900 N/mm^2 and resistance to spread of flame of class A catogary with property of being termite /borer proof ,water/ moisture proof and fire retardent and fixed in position with MS hold fast /lugs /SS dash fasterners of required dia and length complete all as specified and directed.Note:- For WPC solid door /window frames (-) 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable, but no extra payment on this account shall be made. |
| 9 | S&F single extruded Factory made WPC wood (polymer composite) solid door flush door shutter comprising of vergin PVC polymer of K value 58-60 (Suspension grade),calcium carbonate and natural fibers ( wood powder /rice husk/wheat husk and non toxic additieves (maximum toxicity index of 12 for 100 grams) hacing minimum density of 650 Kg/Cum screw withdrawal strength of 1800 N (face) and 900 N (Edge) minimum compressieve strength of 50 N/mm^2, modulus of elasticity 850 N/mm^2 and resistance to spread of flame of class A catogary with property of being termite /borer proof ,water/ moisture proof and fire retardent and fixed in position with stainless Steel butt hinges of required size with necesassary threaded counter sunk S.S Screws all as per direction of Engr -In-Charge. |
| 10 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified and directed. |
| 11 | S&F Pressed steel frames (factory made) made out of 1.25 mm thick black MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete size of frame 125x60mm incl bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side complete all as specified and directed. |
| 12 | S&F Pressed steel frames (factory made) made out of 1.25 mm thick black MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete size of frame 105x60mm incl bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side complete all as specified and directed. |
| 13 | S&F pressed steel frame of size 60X40mm for cupboard doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed |
| 14 | M&L PCC (1:3:6) type C-0 (12.5 mm graded aggregate) filling back of chowkats complete all as specified & directed. |
| 15 | S&F Box type steel windows for desert coolers comprised of tubular frame and shutters made out of 1.25 mm thick MS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes will be measured and paid seperately) with side hung shutters with MS handles and MS peg stay dovetailed or welded incl 02 Nos, MS Tower bolts 150 mm long for each leaf and 10 mm square bar grill / guard bars at spacing as shown on Drg welded to MS flat iron frame work ,including other fittings ,hinges ,MS handles ,tarred hold fasts ,PCC blocks for hold fasts etc all as shown on Drg No CEPZ/C-TD /032/13 sheet 1/2 to 2/2, complete all as specified and directed. |
| 16 | S&F Box type steel windows comprising of tubular frame and shutters made out of 1.25mm thick MS steel tube, factory made, with double side shutters wire gauged shutter and glass glazed shutter (wire and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to F1 frame work, including other fittings, hinges, handles tarred hold fasts PCC blocks etc all as shown on Drawing No CEPZ/TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed. |
| 17 | S & F steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, including10 mm square grill complete all as specified and directed. |
| 18 | S&F Factory made glazed and skeleton shutters 35mm thick, of second class hard wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed. |
| 19 | S&F Aluminium handles cast type, anodised, 150mm size complete, complete all as specified and directed. |
| 20 | S&F Aluminium alloy, anodised, sliding door bolt 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy , complete all as specified & directed. |
| 21 | S&F Aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, complete all as specified & directed. |
| 22 | S& F Mild steel stove enameled helical door spring 150 mm size fixed to pressed steel frame/MS frame/wooden chowkhats including necessary welding work etc (if required) complete all as specified directed. |
| 23 | S&F Butt Hinges medium weight cold rolled mild steel of size 100 mm all as specified and directed. |
| 24 | S & F stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples including fixing with new nut bolts or screws complete all as specified and directed. |
| 25 | S&F in repair 150mm dia Floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 26 | Supply & fix in repairs stainless steel peg set of five with chromium plated back plate 304 grade, 40mm wide fixed with chromium plated screw complete all as specified and directed. |
| 27 | S&F in repairs 40 mm dia, cupboard knobs fixed with nut, screw and washer of stainless steel, bright finished complete all as specified and directed. |
| 28 | S&F 19/20mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber framed work as in cup board shutters, shelves, pelmet box, cabinet etc., fixed in repairs, complete all as specified & directed. |
| 29 | S&F in repair magnetic catcher and striking plate including letting in and fixed complete all as specified and directed. |
| 30 | S&F Continuous (PIANO) hinges, mild steel, bright finish or electrogalvanised 30 mm width of flaps (when open) complete all as specified as directed. |
| 31 | S & F Aluminium (Die Cast) Body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 32 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and fixed complete all as specified and directed. |
| 33 | Supply and fix 3mm thick ordinary quality plain sheet glass glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 34 | Supply and fix 3mm thick figured glass, pin headed and glazing with oil putty in square not exc 0.50 sqm each pane complete all as specified and directed. |
| 35 | S & F in repairs 150mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 36 | S & F in repairs Mild steel Drawers handles, projections drop (50mm to 65mm) on screwed plate complete all as specified and directed. |
| 37 | Taking down aluminium chowkats with shutters of any size/description including glass panes, rubber packing, snap beading, particle/partition board etc, complete all as specified & directed. |
| 38 | M & L for anodised aluminium powder coated frame for doors, windows, ventilators with on e or more rebates including cleats for fixing etc complete all as specified and directed. |
| 39 | M & L forAnodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 40 | M 7 L for anodised aluminium grill (anodised transparents or dyed to required shade according to IS 1868 with minimum anodic coated of grade AC-15) of approved design/pattern with approved standerd sections and fixed to the existing window frame with CP brass/stainless steel screws @200mm centre to centre , including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standerd section around the opening , complete all as specified and directed. |
| 41 | Aluminium anodized three track window shutters consisting of two Nos glazed shutters and one gauzed shutter including, aluminium handle, tower bolt hinges all made of aluminium section, powder coated, of adequate number and size and all member of window of size 44.45mm x 44.45mm (window) and jointing cleats. All aluminium members shall be made out of 1.60mm thick aluminium sheet/section) complete all as specified and directed.Note : Glass panes / wire mesh shall be measured and paid for separately. |
| 42 | M & L for 5mm thick coloured or tinted glass glazing as in aluminium door/ window/ ventilator with aluminium hollow beading/ glazing clip (included with shutters) size 19mm x 17mm made out of 0.70mm thick hollow section weighing not less than 0.97 Kgs/RM including rubber gasket, complete all as specified & directed. |
| 43 | M&L for preparing of new or previously untreated surfaces of wood of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.. |
| 44 | M&L for preparation of new or previously untreated steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red-oxide primer complete all as specified and directed.. |
| 45 | S & F of Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repairs, complete all as specified & directed. |
| 46 | S & F mortice lock 4 lever vertical type size 100 mm long complete all as specified and fixed in repair complete all as specified and directed. |
| 47 | S&F in repairs Door seal (Snake guard) with Aluminium frame powder coated up to 900 to 1000mm door opening complete all as specified and directed. |
| 48 | Dismantling wall floor or hearth tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified and directed. |
| 49 | Demolition of stone slabs and tiles of any description or thickness in floors etc laid, bedded and painted in any mortar complete all as specified and directed. |
| 50 | M& L for Coloured glazed ceramic tiles as in vertical surfaces 450 x 300 x 7 mm thick set over and including 10mm thick including backing coat in CM 1:4 and jointed in neat cement slurry and pointed in white or colored cement to match complete all as specified and directed. |
| 51 | M&L Granite (of any type) stone slab 18 to 20 mm thick in floors or on cooking platforms etc, set , jointed pointed with grey cement slurry mixed with pigments to match the shade of the slabs including rubbing & polishing laid over and including 15 mm thick screed bed in CM 1: 6 complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 02, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 09, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender