|
| 1 | Resecuring or easing of door shutters for easy closing / opening, end tightening of butt hinges in position, adjustment of butt hinges in position, adjustment of existing iron mongry exc 1 Sqm and n.exc 2 Sqm each, complete all as specified and directed. |
| 2 | Taking down door shutters and changing of unserviceable existing butt hinges and re-fixing in same opening including welding etc exc 1 Sqm and n.exc 2 Sqm complete all as specified and directed. |
| 3 | S&F in repair 300mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and directed. |
| 4 | S&F in repair 150mm long aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 5 | S&F in repair 150 mm long extruded Aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 6 | S&F in repair 100 mm long extruded Aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 7 | S&F in repair 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed as in repairs including taking down the unserviceable existing, complete all as specified and directed. |
| 8 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed as in repair including taking down the unserviceable existing, complete all as specified and directed. |
| 9 | Hacking out old broken glass (any thickness) size quality etc from any frames fixed with pin, beading or oil putty, complete all as specified and directed. |
| 10 | Supply and fixing of 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty or beading in square n.exc 0.5 Sqm in each panes, complete all as specified and directed. |
| 11 | All as per item No.10 above but Frosted on one side glass 4 mm thick, complete all as specified and directed. |
| 12 | S&F in repair curtain rods 20 mm bore, mild steel, chromium plated with fixing brackets, stops, rollers, knobs/finials etc, complete all as specified and directed. |
| 13 | S&F in repair 20 mm dia stainless steel of grade 304 drapery rod cut to size and fixed in position including brackets, end Knobs, and knobs fixed to wall, complete all as specified and directed. |
| 14 | Material and labour in reapair for rubber bead/seal 40mm wide and 3-4mm thick to cover doors/window gap fixed with nails and make good to doors as in repair, complete all as specified and directed. |
| 15 | S&F in repair 100mm size Butt hinges, medium weight, cold rolled mild steel, and fixed including welding if reqd, complete all as specified and directed. |
| 16 | S&F in repair 75mm size Butt hinges, medium weight, cold rolled mild steel, and fixed including welding if reqd, complete all as specified and directed. |
| 17 | M&L in repairs 100 mm long mild steel handle for steel window, complete all as specified and directed. |
| 18 | Taking down existing aluminium door and re-fixing the same after replacement of rubber beads, lock, door stoper, Handles etc and minor repairs in Hydrolic door stoper or adjustments and refixing the taken glass etc, complete all as specified and directed. |
| 19 | S&F in repair for 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed. |
| 20 | S&F in repair 32mm dia PVC flush pipe for low level flushing cistern long type, complete all as specified and directed. |
| 21 | S&F in repair 15 mm bore (concealed) stop cock ISI marked, cast copper alloy, screwed down, high pressure, fancy type, chromium plated handle screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. |
| 22 | S&F in repair Brass chromium plated shower rose 125mm size with shower arm including Nipple, socket and other fittings etc, complete all as specified and directed. |
| 23 | M&L for 15mm dia pillar taps CP brass with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed as in repair including taking out the existing pillar tap, complete all as specified and directed. |
| 24 | S&F in repair 15mm dia Bib taps chromium plated fancy type cast copper, with crutch or butterfly handle screwed down, screwed for Iron pipe or for brass ferrule, complete all as specified and directed. |
| 25 | S&F in repair 15mm dia stope valves/angle cock fancy type chromium plated with long shank and cup cast copper alloy screwed down, high pressure withcrutch or butter fly handle screwed both ends for iron pipe, complete all as specified and directed. |
| 26 | S&F in repair 15 mm bore central hole basin mixer with 450mm braided connection pipe (without popup), complete all as specified and directed. |
| 27 | S&F in repair 15 mm bore Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed. |
| 28 | S&F in repairs bath room cabinet mirror of hard thermosetting plastic size 625 x 625 mm fitted with superior quality distortion free 4 mm thick mirror, complete all as specified and as directed. |
| 29 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete in all respect as specified. |
| 30 | S&F in repair towel rail 600 mm long and 20mm dia of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed. |
| 31 | S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms), complete all as specified and directed. |
| 32 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 33 | S&F in repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 34 | S&F in repair 25mm bore flush cock half turn brass chrominium plated with adjustable flange, complete all as specified and directed. |
| 35 | S&F in repair PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete all as specified and directed. |
| 36 | S&F in repair 15mm dia PVC connection of length 450mm fixed as in repair including taking out the existing unserviceable, complete all as specified and directed. |
| 37 | S&F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as speified and directed. |
| 38 | S&F in repair of PVC waste pipe 32mm dia, 90 cm long for wash hand basin/sink/urinal, complete all as specified and directed. |
| 39 | S&F in repair of PVC waste pipe 40mm dia, 90 cm long for wash hand basin/ sink/ urinal, complete all as specified and directed. |
| 40 | S&F in repair waste coupling of PTMT (half or full thread), 32mm dia with minimum weight 45 gm, complete all as specified and directed. |
| 41 | S&F in repair waste coupling of PTMT (half or full thread), 40mm dia with minimum weight 60 gm, complete all as specified and directed. |
| 42 | S&F in repair mild steel angle iron bracket with 25x25x3mm angle iron for WHB including steel painting and making good disturbed surface, complete all as specified and directed. |
| 43 | Supply & Fixing in repair PVC Syphon kit suitable for PVC Cistern, complete all as specified and directed. |
| 44 | S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug,CP weast cuppling, washers waste pipe, cast iron cantilever brackets, connecting union overall size 914mmx460mm with bowl size 405mm x 354mm x 203mm, complete all as specified and directed. |
| 45 | S & F in repair Stainless steel plate rack of size 600x750x250mm. 1 mm thick sheet for kitchen, complete all as specified and directed. |
| 46 | S&F in repair 20 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight-210gms, complete all as specified and directed. |
| 47 | S&F in repair PVC cover (Lid) for OHT of capacity 500/1000 Ltr, complete all as specified and directed. |
| 48 | Repairing only for Leakage of Rotational moulded polythene three layer water storage tanks position 500ltrs capacity including disconnecting the tank with rapair the leakage portion using M seal, 2Nos of 20 to 25mm GI union and checked nut etc, complete all as specified and directed. |
| 49 | S&Fof Rotational moulded polythene water storage tanks , hoisted and fixed in position 1000ltrs capacity includin GI union, checked nut and 20mm PTMT float Valve, complete all as specified and directed including taking down old PVC tank. |
| 50 | S&F Rotational moulded polythene water storage tanks, hoisted and fixed in position 500ltrs capacity including GI union, checked nut and 20mm PTMT float Valve, complete all as specified and directed including Dismantling of old PVC tank and removing to store. |
| 51 | Labour only opening of air lock in toilets/ bath and kitchen but excluding fittings, complete all as specified and directed. |
| 52 | M&L for 15mm dia GI tubing medium grade with all fittings, fixed as in repair to walls, ceiling or laid under floors including taking down unserviceable existing line, complete all as specified and directed. |
| 53 | All as per item No 52 here-in-before but, 20 mm dia, complete all as specified and directed. |
| 54 | S&F in repair Grating doom 100mm dia of CP, complete all as specified and directed. |
| 55 | Repair only to CP long body bib taps , pillar tab,bib tap, etc of any make by replacing spindle, nipple, washer, knob etc. at any size etc, complete all as specified and directed. |
| 56 | Taking down soil, waste and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks, bends etc., complete all as specified and directed. |
| 57 | S & F for 110 mm dia PVC (SWR) pipes, single socketed, fixed to walls with and including MS clamps, complete all as specified and directed. |
| 58 | S & F for 75mm dia PVC (SWR) pipes, single socketed, fixed to walls with and including MS clamps, complete all as specified and directed. |
| 59 | S & F for 75mm dia PVC (SWR) pipes, single socketed, laid in trenches or in floors with and including demolition of existing PCC or floor required, complete all as specified and directed. |
| 60 | Supply and fixing in repair 110mm PVC (SWR) bends or elbow of any radius, complete all as specified and directed |
| 61 | Supply and fixing in repair 75mm PVC (SWR) bends or elbow of any radius, complete all as specified and directed |
| 62 | Supply and fixing in repair 110mm PVC (SWR) Junction single, single (T)equal or unequal, complete all as specified and directed |
| 63 | M&L for filling white cement on floor/wall tiles joints including removing old fillings etc, complete all as specified and directed. |
| 64 | S& F in repair PVC flushing cistern, flushing pipe including all fittings etc, complete all as specified and directed. |
| 65 | S&F in repair stainless steel sink of any size with coupling including white cementing along wall side etc, complete all as specified and directed. |
| 66 | Dismantling floor hearth or wall tilling including cement mortar bedding , removing serviceable tiles to stack and rubbish off the premises, complete all as specified and directed. |
| 67 | M&L for Non Skid ceramic tiles coloured 300mmx300mmx 7 to 8 mm thick (square/ rectagular) area of each in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed layer in CM (1:6) for lying floor finish etc, complete all as specified and directed.. |
| 68 | M&L for Glazed ceramic coloured tiles in vertical surface 450x 300x7 mm thick tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile over and inclduing 10mm thick rendering in CM (1:4) complete etc, complete all as specified and directed. |
| 69 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 70 | M&L for 18-20 mm thick granite work table rubbed and polished in steps jambs pillars window cills, cooking platform and like in cement mortar 1:4 thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 71 | S&F Mild steel framed work as in grills, grating etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, conforming to Fe-290 gde E165, complete all as specified and directed. |
| 72 | M&L for sunken portion incl demolition of existing PCC,WC,P/S Trap and removing the material out side MD land.& (a) preparation of RCC surface of sunken slab (floor) by brushing and cleaning throughly with water (b) application of two coats of poly urethane based chemical treatment (as per manufracture instruction DR FIXIT/FOSROC/CICO/STP) (c) 15 mm thick (1:4) plaster over chemical coating incl finished even & smooth without using extra cement, complete all as specified and directed.Note:- 1. continuty with cementitious water treatmentbeyond sunken portion in toilet shall be maintaned. |
| 73 | M&L for taking down cement plaster incl tile etc and removing the material out side MD land.& (a) preparation of RCC surface of sunken slab (side) by brushing and cleaning throughly with water (b) application of two coats of poly urethane based chemical treatment (as per manufracture instruction DR FIXIT/FOSROC/CICO/STP) (c) 15 mm thick (1:4) plaster over chemical coating incl finished even & smooth without using extra cement, complete all as specified and directed.Note:- 1. continuty with cementitious water treatmentbeyond sunken portion in toilet shall be maintaned. |
| 74 | M & L for cement concrete type E2 1:5:10 (40mm graded crushed stone aggregate) as lean concrete in filling / Mass concrete, complete all as specified and directed |
| 75 | M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded crushed stone aggregate), complete all as specified and directed. |
| 76 | Supply and fixing in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, (excluding flushing cistern & flush pipe fixed including connection to trap and to flushing pipe,anti sphonage pipe etc.) making good the disturbed surfaces and to match with existing surface and taking out the existing pan, complete all as specified and directed. |
| 77 | Supply and fixing (in Repair) vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) and P or S trap including connection to drain (or outgoing pipe) and to flushing pipe anti-syphonage pipe etc complete all as specified and directed. including plastic water closetseat closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device, complete all as specified and directed. |
| 78 | Supply and fixing (in Repair) vitreous china wash hand basin, white, flat back, size 580 x 450mm excluding taps, waste, chain and plug and porcelain stopper but including pvc connection pipe of 450mm length, waste coupling of 32mm dia of PTMT, MS brackets including cutting for and pining in ends of brackets, complete all as specified and directed. |
| 79 | S & F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete incl providing and fixing plugs,bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and incl 60 mm long brass screws,pointing around urinal back in cement, fixing flush pipe, complete all as specified and directed. |
| 80 | M&L for brooming down plastered/unplastered old decorated surface of wall incl cornice etc and applying two coat of white wash, complete all as specified and directed. |
| 81 | All as per item No 80 here-in-before but, on ceiling, complete all as specified and directed. |
| 82 | M&L for Preparation of old decorated surface of wall incl cornice etc and applying one coat of oil bound distemper in any colour, complete all as specified and directed. |
| 83 | All as per item No 82 here-in-before but, two coats of oil bound distemper in any colour on wall, complete all as specified and directed. |
| 84 | Taking down Chowkats or frames with shutter not exceeding 1.5 Sqm each (without taking off shutters from the frames), complete all as specified and directed. |
| 85 | Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each, complete all as specified and directed. |
| 86 | S & F of solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing, complete all as specified and as directed by the Engineer-in-Charge. |
| 87 | S & F of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supply & fixing in the frame at site as per specification & drawing, complete all as specified and as directed by the Engineer-in-Charge. |
| 88 | S&F of 35 mm thick 2nd class Hard wood of Glazed and skelton shutters, open rebated and prepared to receive glass, gauze,etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing class etc, size of me-mbers of shutters as specified in SSR Part-I, complete all as specified and directed. |
| 89 | S&F of Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed as in repair including taking down the unserviceable existing, complete all as specified and directed. |
| 90 | S&F of 35 mm Flush shutters, solid construction, with block board core and playwood face panels, commercial type on both side, complete all as specified and directed. |
| 91 | S & F of 100 mm But Hinges, medium weight cold rolled mild steel and fixed, complete all as specified and directed. |
| 92 | S & F of 250 mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and directed. |
| 93 | S & F of 150mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 94 | S & F of 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 95 | M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 96 | M&L for preparing new or previously untreated surfaces of steel materials of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 97 | S&F for 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed. |
| 98 | S&F for 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed. |
| 99 | Taking down Chowkats or frames with shutter exceeding1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frames), complete all as specified and directed. |
| 100 | Taking down shutters of any description not exceeding 1 Sqm each, complete all as specified and directed. |
| 101 | Refixing of shutter in the same opening of any description n exceeding 1 sqm each, complete all as specified and directed. |
| 102 | Refixing of shutter in the same opening of any description exceeding 1 sqm but n exc 2 sqm each, complete all as specified and directed. |
| 103 | S&F for Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 104 | S&F for Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 105 | S&F of 35 mm thick factory made shutters, 2nd class Hard woodwood rail and style, plain framed,panelled shutter with interloking rail with one panel of 9mm BWP Commercial ply or 12mm veneered particle board with commercial face veneers on both faces. The size of rail and stileas per SSR Part-I, kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 106 | S&F of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging of Fe-410-W(Gde-E250 quality B) also fastening and fixing, omplete all as specified and directed. |
| 107 | S&F for steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded etc, complete all as specifed and directed. |
| 108 | S&F for steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded etc, complete all as specifed and directed. |
| 109 | S&F for Steel ventilator with top hung shutter including hinges, steel peg stay etc, complete all as specifed and directed. |
| 110 | M&L for Mild steel work in bands straps,including bolts as in holdfasts and similar articles conforming to Fe-310-0,Fe-410-0, complete all as specified and directed. |
| 111 | M&L for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0. (in Repair), complete all as specifed and directed. |
| 112 | S & F of 100mm Stainless steel Butt hinges, complete all as specifed and directed. |
| 113 | S & F of 200 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specifed and directed. |
| 114 | S&F of 18-19 mm thick block board grade 2 quality interior grade quality, decorative type with decorative face veneer on one face as in cupboard shutters,shelves and pelmet boxes fixed with screw to timber frame work, complete all as specifed and directed. |
| 115 | S&F of 12 mm thick block board grade 2 quality interior grade quality, decorative type with as in cupboard shutters,shelves and pelmet boxes fixed with screw to timber frame work, complete all as specifed and directed. |
| 116 | S&F of 125 mm Hasp and staple,aluminum anodised and fixed with screw, complete all as specifed and directed. |
| 117 | S & F of Continous (piano) hinges, mild steel bright finished or electro qalvanized, width of flaps(When open) 30mm, complete all as specifed and directed. |
| 118 | S&F for PVC cabinet frame of size 18mm x75mm made out of 18mm thick PVC board wood grain colour and frame shall be fixed with 50mm long steel screw inside using drilling machine and plastic fasteners Make : Rajshree or equivalent, complete all as specified and directed. |
| 119 | S&F of PVC cabinet box and shutter made out of 18 mm thick one side PVC prelaminated wood grain board and shutter will be fixed on the PVC frame with auto hinges and steel screw including fancy type stainless steel handles, magenetic catcher etc complete all as specified and directed. Size of cabinet not more than 90 cm wide, complete all as specified and directed. |
| 120 | S & F of 0.56 mm thick plain aluminium sheeting alloy 31000 H4 ridges hips, valley gutter, drip, and straight flashing fixed to doors, complete all as specified and directed. |
| 121 | S&F for powder coating aluminium frame for doors, windows, ventilators ,partion etc with one or more rebates including joining cleat for fixing etc. complete all as specified. (minimum thickness of powder coating 50 micron), complete all as specified and directed. |
| 122 | S&F for 3 mm thick Aluminium composite panel cladding using aluminium composite panel sheet 3mm thick (Vita 25mm aluminium foil with PVDF coating) at ht of 4-5 mtr (ACP will be fixed over aluminum framed works) and filling the gap with silicon, sealant and other materials of approved quality etc, complete in all respect as specified and directed. |
| 123 | Supply & fixing of 4.8mm thick sheet glass ordinary quality any size and in any type of frame and glazing with rubber beading in square n.exc 0.5 Sqm in each panes, complete all as specified and directed. |
| 124 | All as per item No. 123 above but 4.8mm thick glass in square exc 0.5 Sqm in each, complete all as specified and directed. |
| 125 | S & F Aluminium (powder coated) sliding glazed shutter/casment shutter of suitable size with necessary joining cleats, glazing clips, rubber gasket, aluminium snap beading and locking arrangement at both end, complete all as specified and directed. Notes : (i) Frame and Glass filling in panels to windows shall be measured and paid for separately under respective item. (ii) Thickness of powder (epoxy polyster) coating shall not be less than 50 Micron(iii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE. (iv) Aluminium section shall be as per drg No. CE/ALD/TD-194 sheet No. 1/2 & 2/2 |
| 126 | S & F Aluminium powder coated door shutters type with top rail lock rail, bottom rail, styles etc including joining cleats, glazing clip, gasket, beading with locking arrangemen, complete all as specified and directed.Notes : (i) Frame, glass and particle board panel shall be measured and paid for separately under respective item of schedule 'A' part V.(ii) Frame floor spring, builder hardware shall be measured under of schedule 'A' part IV.(iii) Aluminium section of shutter shall be as per Drg No. CE/ALD/TD-224 sheet No. 1/1. |
| 127 | Taking down existing aluminium windows and re-fixing the same after minor repairs replacement of rubber beading , aluminium strips and windows shutter side locking arrangement etc, complete all as specified and directed. |
| 128 | M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty and fixed including Taking down existing floor spring if required, complete all as specified and directed. |
| 129 | S&F in repair Aluminium)die cast body)Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed. |
| 130 | Supply only 3mm thick figured glass pin head type glazing with oil putty on metal frame or wooden beads in square n exc 0.5 Sqm in each pane, complete all as specified and directed. |
| 131 | S&F 3mm thick sheet glass ordinary quality glazing with oil putty on metal frame or wooden beads in square n exc 0.5 Sqm in each pane, complete all as specified and directed. |
| 132 | M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate for fixing holdfast and coping including all necessary form work, complete all as specified and directed. |
| 133 | M&L for preparing old surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint etc, complete all as specified and directed. |
| 134 | M&L for preparing old or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint etc, complete all as specified and directed. |
| 135 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking, complete all as specified and directed. |
| 136 | M&L rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished fair and even, complete all as specified and directed. |
| 137 | M&L for rendering 15 mm thick on fair faces of brick work in CM in 1:4 finished even and fair and mixing with water proofing liquid as per manufacturer instruction (but excluding the cost of water proofing liquid ) external surface, complete all as specified and directed. |
| 138 | Supply only Liquid water proofing compound of approved make, complete all as specified and directed. |
| 139 | M&L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even, complete all as specified and directed. |
| 140 | M & L applying three coats of white wash on ceiling incl preparation of new plastered surfaces, complete all as specified and directed. |
| 141 | M&L preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted over 1 mm thick wall care putty, complete all as specified and directed. |
| 142 | M&L preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint white or tinted, complete all as specified and directed. |
| 143 | Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. Please Enable Macros to View BoQ information |
