|
| 1 | S&F in repairs Galvanised. 2 strand, mild steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed. |
| 2 | Dismantling fencing wire mesh, chain link any type and any size etc complete all as specified and directed. |
| 3 | Supply only GI chain link fencing of size 50 x 50mm or 75 x 75mm and 3 mm dia complete all as specified and directed. Note: Board of officer convey by GE to check the size with dia and weight per Sqm. |
| 4 | Fixing only G I chain link fencing of any mesh, size and to any type fixing with flat iron and nut bolts etc complete all as specified and directed.Note :- Flat iron, nut bold, round bars etc will be measured and paid separately. |
| 5 | S&F of Mild steel round bars Fe 290 (Gde - E-165)10 mm dia and over, cut to length, bent to shape required, including cranking, bending hooking ends and binding and fixed with flat iron alongwith fixing with chain linkfencing etc complete all as specified and directed. |
| 6 | S&F screw bolts (machine made) with hexagonal or sqare heads at one end and screwed the other each screw to be fitted with one washers and one hexagonal or square nut length of bolts n exc 50mm and dia of shank 5 to 10 mm dia etc complete all as specified & directed. |
| 7 | Demolition of Reinforcement Concrete of any description and in any position etc all as specified & directed. |
| 8 | M&L providing precast cement concrete 1:2:4 Type B1 (20mm graded aggregate) (nominal mix) for cover slab for manhole, drain and similar articals with plane faces including necessary form work complete all as specified and directed |
| 9 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified & directed. |
| 10 | Excavating in post holes (or similar holes) each n exc 0.5 cu.m in soft/loose soil, getting out, returning, filling and removal of extra soil complete all as specified and directed. |
| 11 | Dismantling of wooden / PCC fencing post of any description etc complete all as specified & directed. |
| 12 | S&F angle iron as in post and struts in fencing embeding in concrete, cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., simillar work confirming to Fe-290 Gde E-165 complete all as specified & directed. |
| 13 | M&L for two coats of synthetic enamel paint over one coat of red oxide primer on new steel Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint including preperation of surface all as specified and directed. |
| 14 | M&L for two coats of synthetic enamel paint over one coat of red oxide primer on new steel surfaces of any description ,over 10cm in width or girth not otherwise described including preperation of surface all as specified and directed. |
| 15 | M&L for one coat of synthetic enamel paint on previously treated/ untreated old steel surfaces of any description ,over 10cm in width or girth not otherwise described including preperation of surface all as specified and directed. |
| 16 | Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc including removal of spoil etc complete from drain. (No extra payment shall be claimed on this account) |
| 17 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified & directed. |
| 18 | M&L for brick work with subclass B bricks old size straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 19 | All as per item no 18 above but except brick (using old brick) |
| 20 | M&L for washed stone grit plaster on exterior walls in two layers , under layer 12mm th cement plaster 1:4 ( 1 cement : 4 coarse sand ) furrowing the under layer with scratching tool , applying cement slurry on the under layer @ 3 Kg of cement per sqm , top layer 15 mm th cement plaster 1 :1 / 2 :2 ( 1 cement : 1/2 coarse sand : 2 stone chipping 10 mm nominal size ) in panels with groove all arround as per approved pattern incl. scrubbing and washing the top layer with brushes and water to expose the stone shipping complete all as specified etc all as specified and directed. |
| 21 | Forming groove of uniform size 15 mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens nailed to the under layer incl. removal of wooden battens , repair to the edges of panels and finishing the groove complete all as specified & directed. |
| 22 | M&L, rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surface and finishing surface fair and smooth complete all as specified and directed. |
| 23 | M&L for two coat of cement base paint on new plastered surfaces of wall over one coat of alkali resistant primer including preparation of surfaces complete all as specified and directed. |
| 24 | M&L for preparation of newly plastered surfaces of walls and applying three coat of white wash complete all as specified and directed. |
| 25 | M&L for two coat of cement base paint on old surfaces of wall including preparation of surfaces complete all as specified and directed. |
| 26 | M&L for single coat of apex paint of approved colour on surfaces of pillar/band etc width n exc 0.45 m including preparation of old surfaces complete all as specified and directed. |
| 27 | M&L for preparation of old plastered surfaces of wall and apply two coat of white wash complete as specified and directed. |
| 28 | Demolition of cement concrete of any description and any position etc all as specified & directed. |
| 29 | M&L for PCC 1:3:6 type B2 (using 40mm graded Agg) as in surface channel and drains manhole etc all as specified and directed. |
| 30 | M&L for PCC 1:2:4 Type B1 ( using 20 mm graded stone aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in eight, copings, kneelers, apex stones bed plates, kerbs chajjas , water troughs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating, fixing of chain link fencing etcall as directed incl necessary formwork etc complete all as specified and directed. |
| 31 | M&L for cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 32 | Dismantling of structural steel work incl. doors , gates etc complete all as specified & directed. |
| 33 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces incl. pintle hinges , stops hand made sliding bolts etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing completeall as specified and directed. |
| 34 | All as per item no 33 above but ornamental type gate etc complete all as specified and directed. |
| 35 | M&L for 1.00 mm thick mild steel black sheet as in manhole cover / steel gate or similar works cut to size, holes punched including round headed screw welded etc complete as specified and as directed. |
| 36 | Dismantling of stone slab of any description or thickness in floor ,step, riser etc laid bedded and pointed all as specified & directed. |
| 37 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platformsand like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and as directed. |
| 38 | M&L for 75 mm thick Cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing finishing surface even and rough using broom finish complete all as specified and directed. |
| 39 | M&L for Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified & directed. |
| 40 | M&L for Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified & directed. |
| 41 | M&L 25 mm thick PCC (1:2:4) type B1 (using 12.50 mm graded stone aggregate) as in sub base of floor to receive tiles complete all as specified. |
| 42 | M&L for machine pressed coloured rubber moulded chequered tiles 30 cm x 30 cm x 20 to 22 mm thick set, jointed & pointed in neat cement slurry in floors over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 43 | Dismantling asbestos cement (corrugated, semi corrugated sheet/ North light curve, Ridge etc.) sheets in roof coverings complete all as specified and directed. |
| 44 | S&F of Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 45 | S&F of Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridge/roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 46 | M&L structural steel framed work as in of roof truss purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, wind tie,channel or flat sections) including distance pieces, cleats etc Fe 410 -W (GdeE- 250) quality A complete all as specified and directed. |
| 47 | M&L for cleaning of Roof of Bldg (upto G+2) area exc 300 sqm but n exc 450 sqm by broom including removal of debris material from MOD Land etc complete all as specified and directed. |
| 48 | M&L for cleaning of Roof of Bldg (upto G+1) area exc 100 sqm but n exc 250 sqm by broom including removal of debris material from MOD Land etc complete all as specified and directed. Please Enable Macros to View BoQ information |
