|
| 1 | Compehensive annual maintenance/servicing/repairing including replacement of minor parts such as nuts, bolts, washers, oil grease etcother than major parts as mentioned in subsequent items 2.01 to 7.30 for following laundry equipments. complete all as specified directed by Engr-in-charge(a) Washing Machine 50 Kg -01 Nos(b) Sluicing Machine 25 Kg -02 Nos(c) Hydro Extractor Machine 25 Kg - 02 Nos(d) Drying Tumbler Machine 30 Kg -02 Nos(e) Flat Work Ironer 800 mm x 3000 mm -01 Nos(f) Flat bed press 750 mm x 1500 mm -02 Nos(g) Bulk Mattress sterilizer 50 Kg -01 Nos(h) Dry Linen Trolley-02 Nos(j) Wet Linen Trolley-03 Nos(k) Air compressor - 01 Nos(l) Washing Machine with hydro extractor 20 Kg - 05 Nos(m) Drying Tumbler Machine 20 Kg - 05 Nos(n) Air compressor - 01 NosNote:- (i) Make and size of various spare parts if not given shall be as per existing.(ii) Spares required for replacement will be measured and paid seperatly as per actual as listed in Sch-A Section -II for each machine. However laundry will dismanteled in the presence of rep of Engineer-in-Charge. (iii) Ser No (a) to (k) items installed at MH Jodhpur and Ser No (l) to (n) installed at 33 Med Regt Jodhpur near KV No 2 Jodhpur.(iv) Servicing will be carried out by authorise OEM and produce certificate to department. |
| 2 | Sch-A Section -IISupply and fixing in repairs only following spares for Drying Tumbler 20/30Kg for Fabcare Make.complete all as specified directed by Engr-in-Charge |
| 3 | Steam Heating Coils Copper Tube Alu. FINS as suitable for drying tumbler 30Kg |
| 4 | Steam Heating Coils Copper Tube Alu. FINS as suitable for drying tumbler 20Kg |
| 5 | Main Drive V.Belts (No A-2720) Suitable for drying tumbler 20/30Kg |
| 6 | Main Idler V.Belts (No B-2150) Suitable for drying tumbler 20/30Kg |
| 7 | Steam Trape suitable for drying tumbler 20/30Kg |
| 8 | Bye Pass Assembly S.S. Ball valves suitable for drying tumbler 20/30Kg |
| 9 | Automatic Steam inlet valve 50mm Suitable for drying tumbler 20/30Kg of ISI Marked |
| 10 | Main Drive 2 Bearing (No 2213K) + 2 pcs Sleeves Suitable for drying tumbler 30Kg |
| 11 | Main Drive 2 Bearing (No 2213K) + 2 pcs Sleeves Suitable for drying tumbler 20Kg |
| 12 | Main IDLER Bearing (No 2211K) Suitable for drying tumbler 30Kg |
| 13 | Main IDLER Bearing (No 2211K) Suitable for drying tumbler 20Kg |
| 14 | Pneumatic Pipes & Fittings Suitable for drying tumbler 20/30Kg |
| 15 | Alu. Blowers for Suction Suitable for drying tumbler 30Kg |
| 16 | Alu. Blowers for Suction Suitable for drying tumbler 20Kg |
| 17 | Glass with rubber Packing and S.S. screws Suitable for drying tumbler 20/30Kg |
| 18 | Rubber Packing for lint screen suitable for drying tumbler 20/30Kg |
| 19 | Door Latches for lint screen suitable for drying tumbler 20/30Kg |
| 20 | Door Limit Switch Suitable for drying tumbler 20/30Kg |
| 21 | MCB 40AMP TPN |
| 22 | Timer 0 - 60 suitable for drying tumbler 20/30Kg |
| 23 | Timer Rev - Fwd suitable for drying tumbler 20/30Kg |
| 24 | Contactor 40 amp 415V suitable for drying tumbler 20/30Kg |
| 25 | MPD Suitable for drying tumbler 20/30Kg |
| 26 | DTC (Digital Temp. Controller) Suitable for drying tumbler 20/30Kg |
| 27 | Thermo Couple Suitable for drying tumbler 20/30Kg |
| 28 | Push Button Green suitable for drying tumbler 20/30Kg |
| 29 | Ind. Light suitable for drying tumbler 20/30Kg |
| 30 | Red push button suitable for drying tumbler 20/30Kg |
| 31 | Supply and fixing in repairs only following spares for Flat Bed Press 750mm x1500mm for Fabcare Make.complete all as specified directed by Engr-in-Charge |
| 32 | FLOW CONTROL VALVE 1/2\\" suitable for flat bed press 750mm x1500mm |
| 33 | SOLENOID VALVE 1/2\\" suitable for flat bed press 750mm x1500mm |
| 34 | HEATER suitable for flat bed press 750mm x1500mm |
| 35 | SILENCER 1/2\\"suitable for flat bed press 750mm x1500mm |
| 36 | SILENCER WITH FLOW CONTROL suitable for flat bed press 750mm x1500mm |
| 37 | G.I.C. TIMER suitable for flat bed press 750mm x1500mm |
| 38 | SPRING FLAT BED PRESS MAIN FOR FLAT BED PRESS suitable for flat bed press 750mm x1500mm |
| 39 | CONTACT BLOCK 1NO+1NC suitable for flat bed press 750mm x1500mm |
| 40 | CONTACT BLOCK 2NO+2NC suitable for flat bed press 750mm x1500mm |
| 41 | CONTACTOR 9A suitable for flat bed press 750mm x1500mm |
| 42 | CONTACTOR 18A suitable for flat bed press 750mm x1500mm |
| 43 | CONTACTOR 25A suitable for flat bed press 750mm x1500mm |
| 44 | CONTACTOR 32 A suitable for flat bed press 750mm x1500mm |
| 45 | CONTACTOR 40 A suitable for flat bed press 750mm x1500mm |
| 46 | DOOR GAS KIT suitable for flat bed press 750mm x1500mm |
| 47 | FRL 1/4 suitable for flat bed press 750mm x1500mm |
| 48 | FRL 1/2\\" suitable for flat bed press 750mm x1500mm |
| 49 | INDCATING LIGHT suitable for flat bed press 750mm x1500mm |
| 50 | INDCATING LIGHT CLEAR suitable for flat bed press 750mm x1500mm |
| 51 | LIMIT SWITCH suitable for flat bed press 750mm x1500mm |
| 52 | MPD 0-10 suitable for flat bed press 750mm x1500mm |
| 53 | MPD 7-20 suitable for flat bed press 750mm x1500mm |
| 54 | PNEUMATIC ACTUATOR FITTED BUTTER FLY VALVE 2\\" |
| 55 | PRESSURE SWITCH suitable for flat bed press 750mm x1500mm |
| 56 | PUSH BUTTON suitable for flat bed press 750mm x1500mm |
| 57 | REVERSING TIMER ANALOG TYPE suitable for flat bed press 750mm x1500mm |
| 58 | SINGLE SOLENOID VALVE 1/4 suitable for flat bed press 750mm x1500mm |
| 59 | SS CASTING BALL VALVE FOR STEAM INLET 1/2\\" suitable for flat bed press 750mm x1500mm |
| 60 | SS CASTING BALL VALVE FOR STEAM INLET 3/4\\" suitable for flat bed press 750mm x1500mm |
| 61 | TEMPRATURE METER 72 X 72 mm suitable for flat bed press 750mm x1500mm |
| 62 | Thermo Couple 3MTR suitable for flat bed press 750mm x1500mm |
| 63 | Thermo Couple 5MTR suitable for flat bed press 750mm x1500mm |
| 64 | Supply and fixing in repairs only following spares for Flat Work Ironer 800mm x 3000mm for Fabcare Make.complete all as specified directed by Engr-in-Charge |
| 65 | Polyester Padding suitable For flat work ironer 800mm x 3000mm |
| 66 | Flannel Cloth suitable For flat work ironer 800mm x 3000mm |
| 67 | Final Cover suitable For flat work ironer 800mm x 3000mm |
| 68 | Conveyor Belts Imported with hook & pin as spare suitable For flat work ironer 800mm x 3000mm |
| 69 | Guide Tape suitable For flat work ironer 800mm x 3000mm |
| 70 | Main Bearing Set Roller (2 Pcs. = 1 Set) suitable For flat work ironer 800mm x 3000mm |
| 71 | Flexible S.S. Hose Pipes (3 Pcs. = 1 Set) suitable For flat work ironer 800mm x 3000mm |
| 72 | VFD suitable For flat work ironer 800mm x 3000mm |
| 73 | V-Belts suitable For flat work ironer 800mm x 3000mm .ISI Marked |
| 74 | FRL suitable For flat work ironer 800mm x 3000mm |
| 75 | Pneumatic Fitting & Pneumatic Pipe suitable For flat work ironer 800mm x 3000mm |
| 76 | MCB 63AMP TPN |
| 77 | PUSH BUTTON suitable For flat work ironer 800mm x 3000mm |
| 78 | Ind. Light suitable For flat work ironer 800mm x 3000mm |
| 79 | Temp. Meter suitable For flat work ironer 800mm x 3000mm |
| 80 | Thermo Couple suitable For flat work ironer 800mm x 3000mm |
| 81 | Gripper for Duffle Roll suitable For flat work ironer 800mm x 3000mm |
| 82 | Pinion Gear arrangements Big Gear suitable For flat work ironer 800mm x 3000mm |
| 83 | Pinion Gear arrangements Small Gear suitable For flat work ironer 800mm x 3000mm |
| 84 | Chain suitable For flat work ironer 800mm x 3000mm |
| 85 | Sprocket suitable For flat work ironer 800mm x 3000mm |
| 86 | Supply and fixing in repairs only following spares for Hydro Extractor 25Kg.complete all as specified directed by Engr-in-Charge |
| 87 | Brake Set suitable for Hydro Extractor 25Kg |
| 88 | Indicated Light suitable for Hydro Extractor 25Kg |
| 89 | Push Botton Actuator suitable for Hydro Extractor 25Kg |
| 90 | Limit Switch |
| 91 | Rubber Bush suitable for Hydro Extractor 25Kg |
| 92 | Springs suitable for Hydro Extractor 25Kg |
| 93 | Timer 0 - 15 Min. suitable for Hydro Extractor 25Kg |
| 94 | Main Bearing (No 6306) for Motor suitable for Hydro Extractor 25Kg |
| 95 | Main Contactor 16 Amp ISI Marked suitable for Hydro Extractor 25Kg |
| 96 | Brake Contactor 32 Amp suitable for Hydro Extractor 25Kg |
| 97 | GIC Timer suitable for suitable for Hydro Extractor 25Kg |
| 98 | Brake Transformersuitable for Hydro Extractor 25Kg |
| 99 | Supply and fixing in repairs only following spares for Sluicing Machine 25 Kg for Fabcare Make.complete all as specified directed by Engr-in-Charge |
| 100 | BEARING (No 22213K) suitable for sluicing machine 25 kg |
| 101 | BUTTERFLY VALVE suitable for sluicing machine |
| 102 | RUBBER OIL SEAL suitable for sluicing machine |
| 103 | SLEEVE suitable for sluicing machine |
| 104 | TOGGLE CLAMP SS suitable for sluicing machine |
| 105 | GLASS DOOR FOR WASHING MACHINE suitable for sluicing machine |
| 106 | WASHING MACHINE CONTROLLER suitable for sluicing machine |
| 107 | ELECTRIC PANNEL suitable for sluicing machine |
| 108 | CONTACT BLOCK 1NO+1NC suitable for sluicing machine |
| 109 | CONTACT BLOCK 2NO+2NC suitable for sluicing machine |
| 110 | CONTACTOR 40 Amp 415V TPN suitable for sluicing machine |
| 111 | DOOR GASKIT suitable for sluicing machine |
| 112 | FRL 1/4suitable for sluicing machine |
| 113 | FRL 1/2\\"suitable for sluicing machine |
| 114 | HEATERsuitable for sluicing machine |
| 115 | INDCATING LIGHT suitable for sluicing machine 25 kg |
| 116 | INDCATING LIGHT CLEAR suitable for sluicing machine 25 kg |
| 117 | LIMIT SWITCH suitable for sluicing machine 25 kg |
| 118 | MPD 0-10 suitable for sluicing machine |
| 119 | PNEUMATIC ACTUATOR FITTED BUTTER FLY VALVE 2\\" ROTEX suitable for sluicing machine |
| 120 | PRESSURE SWITCH suitable for sluicing machine |
| 121 | PUSH BUTTON suitable for sluicing machine 25 kg |
| 122 | REVERSING TIMER ANALOG TYPE suitable for sluicing machine 25 kg |
| 123 | SINGLE SOLENOID VALVE 1/4 suitable for sluicing machine 25 kg |
| 124 | SS CASTING BALL VALVE FOR STEAM INLET 1\\" suitable for sluicing machine 25 kg |
| 125 | SS CASTING BALL VALVE FOR STEAM INLET 1/2\\" suitable for sluicing machine 25 kg |
| 126 | SS CASTING BALL VALVE FOR STEAM INLET 3/4\\" suitable for sluicing machine 25 kg |
| 127 | TEMPRATURE METER 72 X 72 mm |
| 128 | Thermo Couple 3MTR suitable for sluicing machine |
| 129 | Thermo Couple 5MTR suitable for sluicing machine |
| 130 | Toggle Switch ON - OFF suitable for sluicing machine |
| 131 | Toggle Switch ON - OFF - ON suitable for sluicing machine |
| 132 | Main Motor suitable for sluicing machine 25 kg |
| 133 | Supply and fixing in repairs only following spares for Washing Machine 20/50 Kg.complete all as specified directed by Engr-in-Charge |
| 134 | V Belt (No 2360) - Suitable for washing machine 50 KG |
| 135 | V Belt (No 2360) - Suitable for washing machine 20 KG |
| 136 | V Belt (No 3600) -Suitable for washing machine 50 KG |
| 137 | V Belt (No 3600) -Suitable for washing machine 20 KG |
| 138 | Temp. Controller Suitable for washing machine |
| 139 | Thermo Couple Suitable for washing machine |
| 140 | Reverse Timer Suitable for washing machine |
| 141 | 0 - 60 Timer Suitable for washing machine |
| 142 | Push Button Suitable for washing machine |
| 143 | Indicating Light Suitable for washing machine |
| 144 | Toggle Switch Suitable for washing machine |
| 145 | LIMIT SWITCH Suitable for washing machine |
| 146 | Door Gasket Suitable for washing machine 50 KG |
| 147 | Door Gasket Suitable for washing machine 20KG |
| 148 | Door Glass Suitable for washing machine 50 KG |
| 149 | Door Glass Suitable for washing machine 20 KG |
| 150 | CONTACTOR 25 Amp 415V TPN Suitable for washing machine |
| 151 | MPD (HUMOTICS DT x 6) Suitable for washing machine |
| 152 | Drain Valve Electric Operated Suitable for washing machine |
| 153 | Water Inlet Valve Electric Operated Suitable for washing machine |
| 154 | Steam Inlet Valve Electric Operated Suitable for washing machine |
| 155 | Main Bearing Suitable for washing machine 50 KG |
| 156 | Main Bearing Suitable for washing machine 20 KG |
| 157 | Sleeve for Main Bearing (No 2211K) Suitable for washing machine 50KG |
| 158 | Sleeve for Main Bearing (No 2211K) Suitable for washing machine 20KG |
| 159 | Idler Bearing (2213K) Suitable for washing machine 50 KG |
| 160 | Idler Bearing (2213K) Suitable for washing machine 20 KG |
| 161 | Sleeve for Idler Bearing (2213K) Suitable for washing machine 50 KG |
| 162 | Sleeve for Idler Bearing (2213K) Suitable for washing machine 20 KG |
| 163 | Motor Main 3 HP Please Enable Macros to View BoQ information |
| 164 | Motor Main 3 HP Please Enable Macros to View BoQ information |
