Tender For Certain Repairs/ Maintenance Of Roads Including Road Furniture, Road Marking And Road Sign Boards Etc At Nagrota, Transit C Under Aor Of Ge Nagrota And Sila Garrison Under Aor Of Ge Nagrota
Tender Value
69.99 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
0 days left
EMD
1.29 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagrota → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repairs/ Maintenance Of Roads Including Road Furniture, Road Marking And Road Sign Boards Etc At Nagrota, Transit C Under Aor Of Ge Nagrota And Sila Garrison Under Aor Of Ge Nagrota
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Jun-2026 | corrigendum | BOQ | 10-Jul-2026 |
| 2 | 10-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-Jul-2026 |
| 3 | 17-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. and sweeping with brooms and finally fanning cleaned surfaces with gunny bags to remove all loose dirts etc and applying priming / tack coat with bituminous primer ( Paving bitumen of Viscosity Grade VG-10) @ 5Kg per 10 Sqm on black top surface complete all as specified and directed by Engr-in-Charge. |
| 2 | Premixed bituminious macadam with 4% of binder content by weight of total mix using paving bitumen of Viscosity Grade VG-30 laid with self propelling mechanical paver rolled and compacted to required gradient and camber (consolidated tthickness up to maximum 75mm) to make good the cut edges of roads etc complete all as specified and directed by Engr-in-Charge. |
| 3 | Bituminous premix semi dense asphaltic concrete 30mm consolidated compacted thickness with 5.5% binder content (using paving bitumen of Viscosity Grade VG-30) ) by weight of total mix, laid with self propelling mechanical paver rolled and compacted to required gradient and camber with power roller complete all as specified and directed by Engr-in-Charge. |
| 4 | Repair to pot holes any depth not exc 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads path etc. cutting around edges to at least 25mm in depth making good by filling in screened and graded road metal, watering and well ramming including supply of road metal complete all as specified and directed. |
| 5 | Repair to pot holes any depth not exc 5 Sqm each including sweeping free from dust and mud or water scoring sunken sufaces in roads, path etc including cutting around edges to at least 25 mm in depth and making good by applying tack coat @ 5 Kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm, blinded with 0.09 Cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). Depth of potholes exc 30 mm complete all as specified and directed. |
| 6 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 Sqm exc 50 mm deep and not exc 100 mm deep complete all as specified and directed |
| 7 | Hot thermo plastic imported road marking material strips conforming to British specification 3762 with 20% glass beads having reflective index of 1.5mm 75% spherical with indigenous or for foundation plan having sufficient strength to withstand heavy load without deformation and having softening point 25 to 30 of area in width of not exc 15 cm & 2.5mm thick strip in white colour according to IRC35-1970, complete all as specified and directed by Engr-in-Charge.Note: Thermo plastic road marking paint shall be of make: ASIAN/ STP Ltd. |
| 8 | Solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc fixed in repairs, complete all as specified and directed by Engr-in-Charge.Note: Greenlite/ Dark Eye/ Sinor. |
| 9 | Cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions fixed in repairs, complete all as specified and directed by Engr-in-Charge.Note: Greenlite/ Dark Eye/ Sinor. |
| 10 | Metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.Note: Greenlite/ Dark Eye/ Sinor. |
| 11 | Safety Mirror 32 Inches/80 cms Polycarbonate Traffic Mirror Unbreakable Round Wide-Angle Driveway Front Convex Mirror, With Adjustable Brackets and Nuts Bolts For Installation including fixing on stainless steel Pipe complete all as specified and directed by Engr-in-Charge. |
| 12 | Pre-fabricated modular PVC speed breaker, 50 mm high and 350-400 mm wide in black and yellow segments, fixed with suitable galvanized bolts and nuts, including drilling in the road surface, cleaning, tightening, complete all as specified and directed by the Engineer-in-Charge.Note: Greenlite/ Dark Eye/ Sinor. |
| 13 | Retro reflective Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25mm x 25mm x 3mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50mm x 50mm x 6mm welded with base plate of size 100mm x 100mm x 5mm at the bottom endand including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. |
| 14 | Retro reflective Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25mm x 25mm x 3mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50mm x 50mm x 6mm welded with base plate of size 100mm x 100mm x 5mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. |
| 15 | Retro-reflective sign board (rectangular) made of 2.0 mm thick aluminium sheet, fully covered with HIP retro-reflective sheeting (Type IV / Type XI), fixed with pressure-sensitive adhesive as per manufacturer’s specifications. Legends, letters, numerals and symbols in contrasting colour conforming to IRC:67-2012. The board shall be mounted on MS angle frame 25mm x 25mm x 3mm and supported on two MS angle posts (minimum 50×50×6 mm) with necessary bracing, nuts, bolts and welding complete. All steel work painted with red oxide primer and two coats synthetic enamel paint. Posts embedded in PCC M-15 (45cm x 45cm x 60cm each) including excavation and curing. The sign board shall be fixed with minimum bottom height 1.5 m above ground or height as decided by Engr-in-Charge, complete all as specified and directed by Engineer-in-Charge. |
| 16 | Cat eye (road stud) made out of ABS plastic body heavy duty with two sides fixed with high intensity grade reflective sheeting in Red/ Yellow colour including fixing with suitable adhesive, fixed in repairs, complete all as specified and directed.Note: Greenlite/ Dark Eye/ Sinor. |
| 17 | Road safety convex mirror of 60 cm dia polycarbonate convex mirror with 130 degree + actual viewing angle, equipped with adjusting swivel and mounting for infinite adjustements, fixed in repairs, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 10, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 17, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 22, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender