|
| 1 | S & F in repairs CP Bib cock (long body) 15mm bore |
| 2 | M & L in repair 15 mm stop valve (concealed cromium plated, screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for unions and fixed complete all as specified. |
| 3 | M & L in repair 20 mm gate valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for unions complete all as specified. |
| 4 | M & L in repair 25 mm gate valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for unions complete all as specified. |
| 5 | S &F in repairs Pillar cock (long nose) chromium plated 15 mm bore complete all as specified. |
| 6 | S &F in repairs Central hole basin mixer (Basin Mixer) brass chromium plated fancy type 15 mm bore complete all as specified. |
| 7 | S &F in repairs PVC connection 15 mm bore of length 600 mm complete all as specified. |
| 8 | S &F in repairs PVC waste pipe 32-40 mm size for Wash Hand Basin / steel sinks/ urinal etc complete all as specified. |
| 9 | S &F in repairs PVC flushing cistern 10 Ltr Capacity including flush pipe complete all as specified. |
| 10 | S &F in repairs CP waste coupling 32 mm size with rubber gasket etc for WHB etc complete all as specifeied |
| 11 | S&F in repair stainless steel towel ring complete all as specified. |
| 12 | S &F in repairs HDPE flush pipe 32 mm dia of flush cistern to WC complete all as specified. |
| 13 | S &F in repairsHealth faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified. |
| 14 | S &F in repairs Two way angle cock 15 mm bore CP complete all as specified. |
| 15 | S &F in repairs Two way Bib cock 15 mm bore CP fancy type complete all as specified. |
| 16 | S&F 600mmx450mm bevelled edge mirror of selected quality glass 5.5 mm thick, mounted on 6mm thick AC/PVC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. |
| 17 | S &F in repairs Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as per sample complete all as specified. |
| 18 | S &F in repairs Sheet glass shelf assembly consisting of 6-8 mm thick sheet glass shelf 10-15cm wide with chromium plated bracket guard and railing 60cm long complete all as specified. |
| 19 | S &F in repairs CP Grating with or without hole (for waste Pipe) 100 mm dia complete all as specified. |
| 20 | S &F in repairs Vitreous China wash hand basin size 550x400 mm size with a pair of brackets, waste pipe, waste coupling complete all as specified. |
| 21 | S &F in repairs Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified. |
| 22 | S &F in repairs sink cock with swan neck , cromium plated for 15 mm bore pipe complete all as specified. |
| 23 | S&F in repairs premium quality vitreous china wash down water closet one piece EWC , snow white/ivory , floor mounted coupled with trap, including connection to drain (or outgoing pipe), with & including WC seat cover closed pattern with flat bottom and cover, vitreous china symphonic action type dual flush system in flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified. |
| 24 | S&F in repairs vitreous china water closet EWC, floor mounted coupled with closet, including connection to drain (or outgoing pipe), including WC seat cover closed pattern with flat bottom and necessary fittings complete all as specified. |
| 25 | S&F in repair Vitreous China bowl urinal flat back, full stall, with grating, spreader, waste pipe and union for discharge pipe complete all as specified |
| 26 | Dismantling of cast iron drain pipes, jointed in cement mortar and taking out of trenches & walls , if required 75/100 mm bore complete all as specified. |
| 27 | Dismentling/taking down waste/ vent pipe fixed to wall with all fitings /accessories 110/75 mm dia pipes complete all as specified. |
| 28 | S & F of PVC (SWR) pipes 110 mm single socketed in any length with rubber ring joints, laid in trenches/ floor or in fixed in wall including securing with clamp & taking down pipe including all fitting etc tee, socket, bend complete all as specified. |
| 29 | S & F of PVC (SWR) pipes 75 mm single socketed in any length with rubber ring joints , laid in trenches/ floor or in fixed in wall including securing with clamp & taking down pipe including all fitting etc tee, socket, bend complete all as specified. |
| 30 | M&L for 75 mm Cast iron soil, sand cast pipe , waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including all fitting etc tee, socket, bend complete all as specified. |
| 31 | M&L for 100 mm Cast iron soil, sand cast pipe ,waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including all fitting etc tee, socket, bend complete all as specified |
| 32 | M&L for 75 mm Cast iron soil, sand cast pipe ,waste and vent pipes in any length with or without ears, with cement joints, fixed in walls including all fitting etc tee, socket, bend complete all as specified |
| 33 | M&L for 100 mm Cast iron soil, sand cast pipe ,waste and vent pipes in any length with or without ears, with cement joints, fixed in walls including all fitting etc tee, socket, bend complete all as specified |
| 34 | S&F in repair PVC SWR bends of 110 mm bore |
| 35 | S&F in repair PVC SWR bends of 75 mm bore |
| 36 | S&F in repair PVC SWR tee of 75 mm bore |
| 37 | S&F in repair Cast iron 100 mm vent cowl |
| 38 | DIismentlingof floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 39 | M&L for coloured glazed ceramic tiles 300mmx450mmx6 -7mm thick as per IS 13712 Grade II(a) over 15mm thick rendering in CM (1:6) set and jointed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dado (colour and pattern as approved by GE) complete all as specified. |
| 40 | M&L for Virified Ceramic double charged tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) complete all as specified. |
| 41 | All item as per Ser No 40.00 above but as in skirting including 10mm thick backing coat in CM 1:4 complete all as specified. |
| 42 | Demolition of Cement concrete in ground floors and pavings n.exc 15 cm thickness below or above ground level) and removing debris out of MOD land complete all as specified. |
| 43 | M&L for 25 mm thick cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) to receive floor finishes etc complete all as specified. |
| 44 | M&L for coloured non skid ceramic tiles 400mmx400mmx6-7 mm thick as per IS 13712 Grade II(a) in floor etc set jointed and pointed in white or coloured cement to match as in floors over and including 15mm thick screed bed in CM (1:6) complete all as specified. |
| 45 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and bedded and pointed in cement mortar complete all as specified. |
| 46 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified. |
| 47 | M&L of 20-25mm thick machine cut KOTA stone slab as in shelves (Single piece) fixed in walls machine cut, laid over cement and jointed with grey cement slurry with pigment to match the shade of the slab, incl rubbing and Mirror polishing complete all as specified. |
| 48 | Machine cut kota stone slab flooring 20-25mm thick over and including 15mm thick screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 49 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed complete all as specified. |
| 50 | M&L 40 mm thick PCC (1:2:4) type B1 using 20mm graded stone aggregate as in floor , hard standing flooring finished even and smooth without using extra cement complete all as specified. |
| 51 | M&L 50 mm thick PCC (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection finished complete including forming joints in 2 mtr interval and filled with bitumen mastic all as specified. |
| 52 | M&L 75 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) complete all as specified. |
| 53 | roviding and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified. |
| 54 | M&L for Chequered cement concrete tiles (rubberised finish) 30cm x 30cm x 25mm thick over and including 20mm thick screed bed in CM 1:6 with grey pigment cement complete all as specified. |
| 55 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 56 | Taking down existing roof treatment in any postion and any thickness on RCC roof slab and debries to be disposed out of MOD land complete all as specified. |
| 57 | M&L for 10mm thick cement mortar 1:4 on roof surfaces and applying two coats of polyurethene (PU) acrylic based water proofing liquid compound over and including a coat of diluted elastomeric self primer and reinforcement fabric sheet as per manufacturer's instruction to stop leakage /seepage from roof/wall complete all as specified and directed by Engineer-In-Charge. Note : (i) Quated rate shall be deemed to be included for the work in building/ structure of any height. (ii) The procurement of material and execution of the work of water proofing treatment shall be got executed from one of the following manufacturers approved by GE : M/S Asian paints Ltd (Damp proof ultra) or equivalent |
| 58 | M&L for carring out water proofing treatment for roof in following stages complete all as specified & as directed by Engineer in charge .:-(1) M&L for rendering 10mm thick in 1:4 mixed with integral water proofing liquid all as per MFGs instructions over concrete surfaces finished even and smooth w/o using extra cement. (II) First coat of bitumen primer confirming to IS 3384 @0.40 Kg/Sqm over plastered surafces (III) Second coat of binding material using blown type bitumen confirming to IS -702 Grade 85/[email protected] kg per Sqm (IV) Third layer of APP modified polymeric membrane centre core of 20 micron HMHDPE , other film 20 micron each thickness 1.5 mm having weight 2.25 Kg/sqm (V) Final coat of binding material using blown type bitumen confirming to IS 702 of Grade 85/25@ 1.2 Kg/Sqm (VI) Final and top most layer of surface which will act as protective layer shall be of M&L for PCC padding 50mm thick in 1:2:4 type B1 (by using 20 mm graded stone aggregate) and making groove 10mm wide x 35mm deep at a distance of 600mm both side and filled with mastic bitumen in ration 1:1 (sand : bitumen) complete all as specified & as directed by Engineer in charge. |
| 59 | M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings,levelling course, kneelers, apex stones, bed plates, kerbs not provided for, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete |
| 60 | Demolition of stone masonry /block walling built in cement mortar complete all as specified. |
| 61 | M&L for squarred rubble walling Jodhpur type regular coursed well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified. |
| 62 | Providing and laying autoclaved aerated cement (AAC) blocks of approved make conforming to relevant IS standards in height above 10 m in cement mortar 1:6 including raking out joints, curing, scaffolding and all necessary leads and lifts complete all as specified. |
| 63 | Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete all as specified. |
| 64 | M&L for 15 mm thick rendering in CM 1:6 cement plaster on brick work/ Concrete surfaces of walls etc finished even & smooth complete all as specified. |
| 65 | Taking down cement plaster from brick walls/ stone walls etc. of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified. |
| 66 | M&L for 15mm thick rendering in cement mortar (1:6) on stone masonary surfaces of wall , finished even and smooth without using extra cement complete all as specified. |
| 67 | M&L for 10mm thick rendering in cement mortar (1:4) on Concrete surfaces of ceiling/chajja/ facia , finished even and smooth without using extra cement complete all as specified. |
| 68 | M&L for 15mm thick rendering in CM 1:4 on stone masonry finished even and smooth without using extra cement all as specified. |
| 69 | M/L two coat of OBD on newly plastered/ unplastered surfaces on wall including preparation of surfaces and 1mm wall care putty complete all as specified. |
| 70 | Preparation of newly plastered surfaces of ceiling & applying three coat of white wash complete all as specified. |
| 71 | M&L for preparation new plastered or unplastered surface of wall and applying two coat of cement base paint on walls complete all as specified. |
| 72 | Preparation of old decorated plastered surfaces of ceiling & applying one coat of white wash complete all as specified. |
| 73 | Preparation of old decorated plastered surfaces of ceiling & applying one coat of OBD complete all as specified. |
| 74 | Preparation of old decorated plastered surfaces of wall & applying one coat of white wash with brush complete all as specified. |
| 75 | Preparation of old decorated plastered surfaces of wall & applying one coat of OBD complete all as specified. |
| 76 | Removing complete existing treatment and M&L for applying two coat of OBD on Old plastered surfaces over and including two coat of wall care putty on walls complete all as specified. |
| 77 | Preparation of old plastered surfaces of wall & applying one coat of cement base paint complete all as specified. |
| 78 | Preparation of old plastered/unplastered surfaces of wall & applying with Acrylic Smooth exterior paint of required shade : (Two or more coat applied @ 0.84 ltr/10 sqm over and including priming coat of exterior primer applied @ 1.10 kg/10 sqm) two coat of exterier emulsion paint complete all as specified. |
| 79 | Preparation of old treated wooden surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified. |
| 80 | Preparation of old steel surfaces of any description, over 10cm width or girth and applyingone coat of synthetic enamel paint complete all as specified. |
| 81 | M & L for preparing old/ New or previously untreated surface of any description over 10cm widht or girth not otherwise described and applying Two coat of Synthetic Enamel paint of 1st grade quality, in one or more tints and pattern (camouflage) as approved complete all as specified. |
| 82 | M&L for 25 to 30mm Jodhpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.5 sqm area fixed with and including one number SS clamps (grade - 202) of flat-30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment complete all as specified. Please Enable Macros to View BoQ information |
