|
| 1 | Refixing shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws, complete all as specified and directed. |
| 2 | S&F in repair extruded aluminium alloy handles ISI Marked, fabricated type, anodised, 150 mm size, complete all as specified and directed. |
| 3 | S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 4 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames, glazed with putty or fixed with beads, complete all as specified and directed. |
| 5 | S&F of sheet glass 4.8 mm, ordinary quality and glazing with oil putty n. exc 0.5 Sqm each pane in square & fixed with rubber beeding, complete all as specified and directed. |
| 6 | M&L for sheet glass ordinary quality 3.0 mm thick and glazing with oil putty not exe 0.50 sqm in each pane, complete all as specified and directed. |
| 7 | S&F in repair fancy type glass corner shelf with CP brackets etc, complete all as specifed and directed. |
| 8 | S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed. |
| 9 | S&F in repair curtain rods 25 mm bore, stainless/mild steel, chromium plated with fixing brackets, stops, rollers, knobs/finials etc, complete all as specified and directed. |
| 10 | Material and labour in repair for rubber bead/seal 40mm wide and 3-4mm thick to cover doors/window gap fixed with nails and make good to doors as in repair, complete all as specified and directed. |
| 11 | Taking down existing aluminium windows exc. 1.50 Sqm and not exc. 2.0 Sqm and re-fixing the same after minor repairs etc. replacement of rubber beading and aluminium strips etc, complete all as specified and directed. |
| 12 | S&F in repair floor door stopper 140mm, of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed. |
| 13 | Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each, complete all as specified and directed. |
| 14 | S&F of flush shutters 30 mm thick, solid core construction, with block board core and polished teak, ply wood face panels, commercial type on both sides, complete all as specified and directed. |
| 15 | S&F butt hinges, medium weight, cold rolled mild steel, 150mm size, complete all as specified and directed. |
| 16 | S&F of aluminium alloy, anodised, sliding door bolt 250 mm long, ISI Markedwith hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed. |
| 17 | S&F of Aluminium anodised barrel tower bolts of extruded section, 150 mm long, complete all as specified and directed. |
| 18 | S&F in repair 300 mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate, complete all as specified and directed. |
| 19 | S&F in repair brass mortice lock, vertical type, size 100 mm, 4 levers, complete all as specified and directed. |
| 20 | S & F in Repair of 18 mm thick Celuka ply both side plain colour fixed with screws/ solvent cement/adhesive to make kitchen cabinet sides, top and bottom and shelves inside the cabinets complete as per specifications and as directed. (Note: Fabrication and installation work to be carried out by authorised Fabricator only.) |
| 21 | S & F in Repair of 18 mm thick Celuka ply one side prelam/rigid laminated and other side plain white colour to make kitchen cabinet Shutter/drawer front shutter, complete as per specifications and as directed. (Note: Fabrication and installation work to be carried out by authorised Fabricator only.) |
| 22 | S&F in repair venation blinds vertical type, level or ultima 100mm width of strip with necessary pulling threads aluminium channel along with all arrangement fixed to wall, complete all as specified and directed. ( Make : Vista or equvalent). |
| 23 | S&F in repair of powder coated aluminium frame for partition with 4.5mm thick glass ordinary quality one or more rebates including joining cleat for fixing etc, complete all as specified and directed. |
| 24 | S&F in repair for powder coated aluminium window three track sliding type weighing not less than 1.35 Kg/RM including 5mm thick glass fixed with rubber gasket. The aluminium member of shutter is 65x40mm alongwith required necessay fittings etc, complete all as specified and directed. |
| 25 | S&F in repair powder coated aluminium anodized door (Partly paneled and partly glazed) with 4.5 mm thick plain glass sheet and 12mm particle board interior grade both side laminated) and aluminium section weight not less than 0.55 kg/RM with all fitting, complete all as specified and directed. |
| 26 | M&L for door single leaf glass with 12 mm thick plain / froasted toughned glass, rail, floor machine, handle with locking device with SS fixtures etc complete supplied and fixed at site including dismantling of existing doors, complete all as specified and directed. |
| 27 | S&F in repair of Stainless steel concealed door closer/over head in floor mounted best quality suitable for door shutters, complete all as specified and directed. |
| 28 | S&F in repair 32 mm dia PVC flush pipe for low level flushing cistern to pedestal/squatting pan including all fittings, complete all as specified and directed. |
| 29 | S&F in repair bib tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore, fancy type (minimum weight 105 gms), complete all as specified and directed. |
| 30 | S&F in repair of toilet paper holder, complete all as specified and directed.(Make Jaquar or equivalent Jaquar cat no:AKP 35753 P as approved by Engr-in-Charge. |
| 31 | S&F in repair Angle cock / value cast copper alloy screwed down with high pressure with crutch or butterfly handle screwed with ends for iron pipe or uinon & fixed of 15 mm dia, complete all as specified and directed. |
| 32 | S&F in repair wash basin mixer 15mm bore, complete all as specified and directed. (Make Jaquaror equivalent). |
| 33 | S&F in repair Hand jet health faucet 15 mm bore with all connected fittings, complete all as specified and directed.Make:- Jaquar and equevilent to Parryware, Hindware, Cera. |
| 34 | S&F in repair bib taps chromium plated cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe of bore 15mm, complete all as specified and directed. Make : Jaquar or equivalent in Cera, Hindware as approved. |
| 35 | S&F in repair Towel rail 600mm, complete all as specified and directed. Make : Jaquar cat No:AKP 35711P or equivlent in Cera, Hindware as approved. |
| 36 | S&F in repair Towel ring, complete all as specified and directed. Make : Jaquar cat No: AKP 35721P or equivlent in Cera, Hindware as approved. |
| 37 | S&F in repair Towel rack with lower hanger 600mm, complete all as specified and directed. Make : Jaquar cat No:AKP 35781P or equivlent in Cera, Hindware as approved. |
| 38 | Repair only to CP long body bib taps , pillar tab etc of any make by replacing spindle,nippule ,washer etc at any size etc, complete all as specified and directed. |
| 39 | S&F in repairs three way wall mixer with provision of over head shower with L bends connecting legs & wall flanges incl nipples, complete all as specified and directed. Make : JAQUAR or equivlent in Cera, Hindware as approved. |
| 40 | S&F in repair 32 mm brass chrome finish bottle trap for Wash hand basin, complete all as specified and directed.Make : Jaquar or equivlent in Cera, Hindware as approved. |
| 41 | Repair only to wall mixer of any make by replacing L-bends, connecting legs& spindle and, nipples etc, complete all as specified and directed. |
| 42 | S&F in repair 150mm Brass Chrome Finish Square Maze Overhead Shower, OHS-1605 with swivel joints, fixed in repairs, complete all as specified and directed. Make: Jaquar or equivlent in Cera, Hindware as approved. |
| 43 | S&F in repair jet spray with flexible pipe and holding screw other fittings etc, complete all as specified and directed. |
| 44 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 45 | S&F in repair PVC waste pipe of 32mm dia suitable for WHB/kitchen sink, complete all as specifed and directed. |
| 46 | S&F in repair Stainless steel plate rack of size 780x900x250mm, 1 mm thick plate, complete all as specified and directed. |
| 47 | Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 250 litres but not exceeding 500 litres and from mouth of circulating pipes, etc, complete all as specified and directed. |
| 48 | Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 500 litres but not exceeding 1000 litres and from mouth of circulating pipes, etc, complete all as specified and directed. |
| 49 | S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 25 mm bore (minimum weight 455 gms), complete all as specified and directed. |
| 50 | S&F in repair PVC cover (Lid) for OHT of capacity 500 Ltr, complete all as specified and directed. |
| 51 | S&F in repair PVC cover (Lid) for OHT of capacity 1000 Ltr, complete all as specified and directed. |
| 52 | Labour only opening of air lock in toilets/ bath and kitchen of GI pipe of any dia but excluding fittings, complete all as specified and directed. |
| 53 | Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed. |
| 54 | Supply and fixing 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc, complete all as specified and directed. |
| 55 | Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed. |
| 56 | Supply and fixing 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc, complete all as specified and directed. |
| 57 | Mild steel chromium plated grating 125 mm dia, fixed in repairs to Nahani traps, complete all as specified and directed. |
| 58 | S&F in repair new beveled edged looking mirror of selected quality glass mounted with SS studs, complete all as specified and directed. |
| 59 | S&F in repair new beveled edged looking mirror of size 600mmx450mm of selected quality glass mounted with SS studs, complete all as specified and directed. |
| 60 | S&F in repair Plastic water closet seat cover, white/ivory colour closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 61 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed. |
| 62 | Supply and fixing (in Repair) Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe), complete in all respect all as specified including plastic water closet seat closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device. |
| 63 | Supply and fixed in repair One piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx35mmx730mm 'white' with soft close seat cover & twin flush fittings, toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etc all as specified in Particular specifications, complete all as specified and directed.Note : Vitreous china wash down water closet (Pedestal Pattern) cat Part No. CURATOR S1013132 S trap 250mm of 'Cera' or equivalent model of make specified in Appendix 'F' to particular specifications. |
| 64 | Supply and fixing in repair vitreous china wall hung wash hand basin with pedestal snow white miniumum size 630mmx450mm including chromium plated brass coupling, chromium plated brass centre hole basin mixer, 450 mm PVC braided connection (two numbers), angular stop cock (valve) (two numbers), complete all as specified in particular specifications. Note : Vitreous china wall hung wash hand basin cat Part No. CONCORD S2040112, Pedestal cat part No S2090107 & chromium plated brass centre hole basin mixer cat part No F2002461 of 'Cera' or equivalent model of make specified in Appendix 'F' to particular specifications. |
| 65 | S&F in repair shower pannel made of anti-finger print stainless steel body, in-built ABS top shower with 60 nozzles+ water fall, 2 movable ABS body top shower with 60 nozzles+water fall, 2 moveable ABS body massage Jet, head shower with flexible hose, shelf, brass faucet body with thermostat mixer and 40 cm stainless steel barbed hose, multifunction water diverter for top shower, 1.5cm stainless steel double locked flexible hoses, complete all as specified and directed. Make : Jaguar Cat No. JPL-SSF-ST88158B or equvalent in Handware, Cera as approved by GE. |
| 66 | S&F in repair PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete all as specified and directed. |
| 67 | Removing and refixing of bottle trap from WHB after cleaning and removing all blockages etc. complete all as specified and directed. |
| 68 | S& F in Repairs PVC Syphon kit suitable for One piece WC Cistern, complete all as specified and directed. |
| 69 | Resecurring of syphon kit by minor adjustment and replaceemnt of syphon washer etc. complete all as specified and directed. |
| 70 | S&F in repair 32mm bore waste fittings of brass CP for glazed ware sinks,basin etc with long screwed shanks , and fly nut flange end bedded in red lead cement and other end fixed, complete all as specified and directed. |
| 71 | Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 72 | M&L for rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, finished fair and even, complete all as specified and directed. |
| 73 | M&L for rendering 10 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even, complete all as specified and directed. |
| 74 | M & L for preparation of old decorated plastered/unplastered surface of walls and applying one coat of plastic emulsion paint, complete all as specified and directed. |
| 75 | M&L for complete removing existing treatment on wall surface and applying two coats of oil bound distemper overover one coat of primer over 1 mm thick wall care putty, complete all as specified and directed by Engr-in-Charge. |
| 76 | M&L for preparation of old painted wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 77 | M&L for preparation of old painted steel sorfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 78 | Material and Labour for preparing newly & Old plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat of Apex ultima protek duralife and top coat of Apex Ultima protek, Make : Asian Paints) over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings from Ground floor upto 04 storeys height of bldgs bldgs, complete all as specified and directed. Make: \\"Apex Ulitima\\" of Asian Paints \\"trucare\\" Primer / \\"Weather coat all Guard\\"of Berger Paints / Dulux weather shield Max of Dulux Paints/Excel top Guard of Nerolac paints as approved by GE complete all as specified and directed. |
| 79 | Prepartaion of wall surface and application of textures panes in following stage :- (i) sanding the surface to make it smooth and applied to 2 mm thick acrylic wall putty allow its to dry for four to six hours after the putty the surface as dried against sanding the surface and applied one coat of deco solvent based primer over the surface. (iii) Again sanding the surface and apply first coat of Royale base coat and second coat of Royle Luxury, Royle shine Emulsion with Proper dillution of water as per procedure recommended by Engr-in-Charge. |
| 80 | M&L preparing old decorated plastered or unplastered surfaces of walls and applying one coat of distemper acrylic emulsion, white or tinted Using Mechanical means, complete all as specified and directed. |
| 81 | As per item No 80 but on ceiling, complete all as specified and directed. |
| 82 | M&L for preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint Using Mechanical means, complete all as specified and directed. |
| 83 | M&L for preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint Using Mechanical means, complete all as specified and directed. |
| 84 | Demolition of brickwork built in cement or cement lime mortar, complete all as specified and directed. |
| 85 | M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6, complete all as specified and directed. |
| 86 | Dismantling of stone slabs, and tiles of any description or thickness in floors aprons etc including cement mortar bedding (but not backing), removing un-serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 87 | M&L for 25mm thick plain cement concrete type B0, 1:2:4 (using 12.5 mm graded crushed stone aggregate) as levelling course, including demolition of Old PCC, complete all as specified and directed. |
| 88 | M & L for non skid Heavy duty Endura tile 400x400x12mm thick coloured joint free in floors etc set and jointed in neat cement slurry and pointed in colored cement to match over and including 15mm thick screed in CM 1:4, complete all as specified and directed. |
| 89 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 90 | Dismantling floor hearth or wall tilling including cement mortar bedding , removing serviceable tiles to stack and rubbish off the premises for minor repair to floor tiles/ nahani traps and repair to concealed stop cock and GI tubing in wall etc in patches, complete all as specified and directed. |
| 91 | M&L for Non Skid ceramic tiles coloured 8 to 10 mm thick(square/ rectagular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed layer in CM (1:6) for lying floor finish etc, complete all as specified and directed. |
| 92 | M&L for double charged Vitrified Ceramic coloured tiles of size of tiles exc 36 Sqm But Not Exc .64 Sqm in each tiles (square/ rectagular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tiles including 15mm thick screed bed layer in CM (1:6), complete all as specified and directed. |
| 93 | All as per Item No 92 but as in skirting set & jointed in neat slurry and pointed in white or colour cement to match the shade tile including 10mm thick rendering in CM (1:4), complete all as specified and directed. |
| 94 | M&L for Glazed ceramic coloured tiles in vertical surface 450x 350x7 mm thick tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile over and inclduing 10mm thick rendering in CM (1:4), complete all as specified and directed. |
| 95 | Taking down PVC soil, waste and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks, bends etc., complete all as specified and directed. |
| 96 | S & F in repair 110 mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including PVC clamps, complete all as specified and directed. |
| 97 | S & F in repair 75 mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including PVC clamps, complete all as specified and directed. |
| 98 | Supply and fixing in repair 110mm PVC (SWR) bends of any radius, complete all as specified and directed. |
| 99 | Supply and fixing in repair 75mm PVC (SWR) bends of any radius, complete all as specified and directed. |
| 100 | Supply and fixing in repair 110mm PVC (SWR) junction single T equal or unequal with acccessible door, complete all as specified and directed. |
| 101 | S&F in repair of Double action floor spring hydraulically regulated made up of minium 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, covering pivot made of brass, other made of mild steel heavy futy and fixed, complete all as specified and directed. |
| 102 | Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern, complete all as specified and directed. |
| 103 | S&F of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensil strength of 550 Mpa as in roof covering to wall fixed with self tapping screws, complete all as specified and directed. |
| 104 | Anti-termite treatment of soil under existing floors using emulsion @ one litre per hole , 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified and directed. |
| 105 | Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm center to center and sealing the same, complete all as specified and directed. |
| 106 | As per item No 103 but plain sheet as in walls, ridges etc, complete all as specified and directed. |
| 107 | S&F in repair of Precast cement concrete louvers and jallies type BO 1:2:4 (12.5 mm Graded aggregate),25 mm thick (measured solid),including all mould-ings but excluding frames set in cement mortor 1:6 (precast frame shall be measureed separately, complete all as specified and directed. |
| 108 | S&F in repair of frame work such as guard bars etc with ends of bars shouldered and or welded or forged into spikes etc and similar works conforming to Fe-310-0, complete all as specified and directed. |
| 109 | Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. Please Enable Macros to View BoQ information |
