|
| 1 | E & M Division Items |
| 2 | Taking Down LT panel/Distribution boxes of any type , any size and any capacity from their existing place and further disposal all as specified and directed by Engr-in-charge. |
| 3 | Taking Down existing LT panel any type , any size and any capacity from their existing place and Refixing the same one in other place including making good the disturbed surface whatever required(as per the existing condition) all as specified and directed by Engr-in-charge.Note-Connecting item like cables, lugs, joints are paid seperatly on heir respecive item of this schedule |
| 4 | Excavation in trenches in soft / loose soil not exceeding 1.5 Mtr in wide and not exc. 1.5m in depth for taking out / laying of under ground cable in trenches or cable ducts all complete all as specified. |
| 5 | Returning, filling in including spreading, levelling, watering and well ramming in layers, not exceeding 25 cm thick in soil after repairing / jointing and laying and testing of cables complete all as specified |
| 6 | Removing surplus soil to a distance not exceeding 50 Mtr and deposited at a level not exceeding 1.5 mtr above from the starting point complete all as specified |
| 7 | M&L natural river sand as cushioning for cables including spreading and punning down complete all as specified. Note : Punned thickness shall be measured for payment purpose |
| 8 | Supply and laying burnt bricks of sub-class 'B' of size 230 X 115 X 75mm laid in trenches for cable protection complete all as specified and as directed |
| 9 | M&L for brick work with sub class \\"B\\" bricks, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed. |
| 10 | Material and labour for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick masonry or concrete surface, finished the surfaces even and smooth with using extra cement complete all as specified. |
| 11 | M&L for cutting existing road / PCC drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with PCC 1:3:6 type CI using 20mm graded aggregates complete all as specified |
| 12 | M&L for 50mm dia GI pipe medium grade galvanised for cable protection and sealing both ends including taking out old pipe complete all as specifie. |
| 13 | M&L for 80mm dia GI pipe medium grade galvanised for cable protection and sealing both ends including taking out old pipe complete all as specified. |
| 14 | M&L for 100mm dia GI pipe medium grade galvanised for cable protection and sealing both ends including taking out old pipe complete all as specified. |
| 15 | Supply, Laying & Jointing LT XLPE PVC insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 16 sqmm 4 core including necessary cable lugs, glands, insulation tape complete all as directed and specified. |
| 16 | Supply, Laying & Jointing LT XLPE PVC insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 50 sqmm 3.5 core including necessary cable lugs, glands, insulation tape complete all as directed and specified. |
| 17 | Supply, Laying & Jointing LT XLPE PVC insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 70 sqmm 3.5 core including necessary cable lugs, glands, insulation tape complete all as directed and specified. |
| 18 | Supply, Laying & Jointing LT XLPE PVC insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 95 sqmm 3.5 core including necessary cable lugs, glands, insulation tape complete all as directed and specified. |
| 19 | Supply, Laying & Jointing LT XLPE PVC insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 120 sqmm 3.5 core including necessary cable lugs, glands, insulation tape complete all as directed and specified. |
| 20 | Supply, Laying & Jointing LT XLPE PVC insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 185 sqmm 3.5 core including necessary cable lugs, glands, insulation tape complete all as directed and specified. |
| 21 | Supply, Laying & Jointing LT XLPE PVC insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 240 sqmm 3.5 core including necessary cable lugs, glands, insulation tape complete all as directed and specified. |
| 22 | M & L straight through joint (Heat Shrinkable) for under ground PVC insulated and PVC sheathed armoured heavy duty XLPE cables with aluminium conductor including jointing kit, including making joints for the cable of size 10/16 sqmm X 2/4 core cables including testing and commissioining complete all as specified. |
| 23 | M & L straight through joint (Heat Shrinkable) for under ground PVC insulated and PVC sheathed armoured heavy duty XLPE cables with aluminium conductor including jointing kit, including making joints for the cable of size 25 to 50 sqmm x 3.5 / 4 core cables including testing and commissioining complete all as specified. |
| 24 | M & L straight through joint (Heat Shrinkable) for under ground PVC insulated and PVC sheathed armoured heavy duty XLPE cables with aluminium conductor including jointing kit, including making joints for the cable of size 70 to 120 sqmm x 3.5 / 4 core cables including testing and commissioining complete all as specified. |
| 25 | M & L straight through joint (Heat Shrinkable) for under ground PVC insulated and PVC sheathed armoured heavy duty XLPE cables with aluminium conductor including jointing kit, including making joints for the cable of size 150 to 185 sqmm x 3.5 / 4 core cables including testing and commissioining complete all as specified. |
| 26 | M & L straight through joint (Heat Shrinkable) for under ground PVC insulated and PVC sheathed armoured heavy duty XLPE cables with aluminium conductor including jointing kit, including making joints for the cable of size 240 to 400 sqmm x 3.5 / 4 core cables including testing and commissioining complete all as specified. |
| 27 | Supply & fix in replacement 400A 4 Pole MCCB, 50 KA, 415V, 50 Hz, AC supply, Ics=100% Icu, adjustable Overload 80-100%, thermal megnatic release mechanism including necessary cable lugs & wire etc complete all as specified and directed. |
| 28 | Supply & fix in replacement 250A 4 Pole MCCB, 36 KA, 415V, 50 Hz, AC supply, Ics=100% Icu, adjustable Overload 80-100%, thermal megnatic release mechanism including necessary cable lugs & wire etc complete all as specified and directed. |
| 29 | Supply & fix in replacement 250A 3 Pole MCCB, 25 KA, 415V, 50 Hz, AC supply, Ics=100% Icu, adjustable Overload 80-100%, thermal megnatic release mechanism including necessary cable lugs & wire etc complete all as specified and directed. |
| 30 | Supply & fix in replacement 200A 3 Pole MCCB, 25 KA, 415V, 50 Hz, AC supply, Ics=100% Icu, adjustable Overload 80-100%, thermal megnatic release mechanism including necessary cable lugs & wire etc complete all as specified and directed. |
| 31 | Supply & fix in replacement 200A 4 Pole MCCB, 25 KA, 415V, 50 Hz, AC supply, Ics=100% Icu, adjustable Overload 80-100%, thermal megnatic release mechanism including necessary cable lugs & wire etc complete all as specified and directed. |
| 32 | Supply & fix in replacement 125A 4 Pole MCCB, 25 KA, 415V, 50 Hz, AC supply, Ics=100% Icu, adjustable Overload 80-100%, thermal megnatic release mechanism including necessary cable lugs & wire etc complete all as specified and directed. |
| 33 | Supply & fix in replacement 63A 4 Pole MCCB, 25 KA, 415V, 50 Hz, AC supply, Ics=100% Icu, adjustable Overload 80-100%, thermal megnatic release mechanism including necessary cable lugs & wire etc complete all as specified and directed. |
| 34 | Supply & fix in replacement 3Ph LED Ammeter CL 1 digital type, 96 X 96 mm square Flush mounted case , Accuracy Class 1.0, with Inbuilt selector switch for 3 phase meters, Input voltage measurement range 50-520 VAC (P-P) , Aux supply 80-300 VAC, with necessary wiring in the panel all complete all as specified and directed. MAKE : ELMEASURE / AE / IMP / MECO / MEI / HPL |
| 35 | Supply & fix in replacement 3Ph LED Voltmeter CL 1, digital type, 0-500V, 96X96 mm square Flush mounted case Accuracy Class 1.0, with Inbuilt selector switch for 3 phase meters, Input voltage measurement range 50-520 VAC (P-P) , Aux supply 80-300 VAC, all complete with necessary wiring as specified and directed MAKE : ELMEASURE/ AE / IMP / MECO / MEI / HPL |
| 36 | Supply & fix in replacement resin cast wound/ring type CT 400A / 5A class 1.0 in 433 Volt LT panel boards after disconnectiong the old ones from site all complete as specified and directed. MAKE : AE / IMP / MECO / MEI / HPL / Crompton |
| 37 | Supply & fix in replacement rotating phase selector switch for voltmeter and ammeter all as specified and directed. Make: C&S/ HPL / AE / L&T |
| 38 | Supply & fix in replacement Copper lugs suitable for 2.5 Sqmm including nuts, bolts and washers complete all as specified and as directed. Make : Sona cable sockets / swastic / Dowells |
| 39 | Supply & fix in replacement Copper lugs suitable for 6 Sqmm including nuts, bolts and washers complete all as specified and as directed. Make : Sona cable sockets / swastic / Dowells |
| 40 | Supply & fix in replacement Copper lugs suitable for 16 Sqmm including nuts, bolts and washers complete all as specified and as directed. Make : Sona cable sockets / swastic / Dowells |
| 41 | Supply & fix in replacement Copper lugs suitable for 25 Sqmm including nuts, bolts and washers complete all as specified and as directed. Make : Sona cable sockets / swastic / Dowells |
| 42 | Supply & fix in replacement Copper lugs suitable for 35 Sqmm including nuts, bolts and washers complete all as specified and as directed. Make : Sona cable sockets / swastic / Dowells |
| 43 | S&F in repair of Control Wiring for voltmeters and Ammeters with 1 Core , 2.5 Sq mm copper cable complete all as specified and as directed. |
| 44 | S&F in repair of Control Wiring for voltmeters and Ammeters with , 6 Sq mm copper cable with proper ferules & appropriate Lugs complete all as specified and as directed. |
| 45 | S&F in repair of Control Wiring for voltmeters and Ammeters with , 16 Sq mm copper cable with proper ferules & appropriate Lugs complete all as specified and as directed. |
| 46 | S&F in repair of Control Wiring for voltmeters and Ammeters with , 25 Sq mm copper cable with proper ferules & appropriate Lugs complete all as specified and as directed. |
| 47 | S&F in repair of Control Wiring for voltmeters and Ammeters with 1 Core , 35 Sq mm copper cable with proper ferules & appropriate Lugs complete all as specified and as directed. |
| 48 | Taking out old existing earthing and M&L for new GI Earthing complete for machinery equipment installed at power house/sub station with copper earth plate electrode 600mm X 600mm X 3.15mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to copper strip 20mm X 3mm main earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron and protected with 40mm dia light grade GI pipe all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) for earth pit with 40 X 40 X 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 40mm dia GI light grade earth lead protection pipe etc complete all as specified and directed. |
| 49 | M&L for repair of LT panels door hinges, mild steel of suitable size including cutting and welding and brazing complete all as specified and directed by Engineer-in-Charge. |
| 50 | M&L for painting of LT panels at site and applying two coat of synthetic enameled grey paint after removing all dust & rust and paint shall confirm to IS 2032 complete all as specified and directed by Engineer-in-Charge. |
| 51 | Supply, fabricated, install, test, and commissioning LT outdoor panel weather proof, dust/vermin proof, made out of 3.15mm thick CRCA sheet double openable door with angle iron frame and locking arrangement , including bus bar suitable for 3 phase 4 wire system, 415v, 50Hz, AC supply wth bus bar aluminium 300 Amps capacity including with PVC sleeves / taps RYB colours for phases indication, confirming to IP-54, and fixed on raised PCC platform with PCC 1:2:4, type B1 (20 mm graded aggregate) raised base with control wiring and compressing cable gland brass, copper/brass lugs etc confirming to CPRI approved manufacture , complete all as specified and directed by the Engineer-in-charge including and accommodating the followings: |
| 52 | (a) MCCB 4 pole 160 Amps 50Hz, 415 V,36 KA -01 nos (for incoming)(b) TPN Bus bar Aluminium 300 Amp-01 (outgoing), mounted on hygroscopic insulator duly colour coded RYB & Green sleeves (c) LED type three Phase indicator with controlling fuses for RYB -01 set(d) 3 Phase Digital panel meter for Amp,Volt,KWH, power factor and other parameter flush mounting of size 96 x96 mm,Current Transformer of suitable rating - Set of three(e) LED type three Phase indicator with controlling fuses for RYB -01 setNote:- All MCCBs are of thermal megnetic release with adjustable type overload protection, short circuit protection. |
| 53 | Supply, fabricated, install, test, and commissioning LT outdoor panel weather proof, dust/vermin proof, made out of 3.15mm thick CRCA sheet double openable door with angle iron frame and locking arrangement , including bus bar suitable for 3 phase 4 wire system, 415v, 50Hz, AC supply wth bus bar aluminium 600 Amps capacity including with PVC sleeves / taps RYB colours for phases indication, confirming to IP-54, and fixed on raised PCC platform with PCC 1:2:4, type B1 (20 mm graded aggregate) raised base with control wiring and compressing cable gland brass, copper/brass lugs etc confirming to CPRI approved manufacture , complete all as specified and directed by the Engineer-in-charge including and accommodating the followings: |
| 54 | (a) MCCB 4 pole 400 Amps 50Hz, 415 V, 36 KA -01 no (for incoming)(b) MCCB 4 pole 250 Amps 50Hz, 415 V, 25 KA -01 no (for Outgoing)(c) MCCB 4 pole 160 Amps 50Hz, 415 V, 25 KA -02 no (for Outgoing)(d) MCCB 4 pole 100 Amps 50Hz, 415 V, 25 KA -02 no (for Outgoing)(e) LED type three Phase indicator with controlling fuses for RYB -01 set(f) 3 Phase Digital panel meter for Amp,Volt,KWH, power factor and other parameter, selector switch flush mounting of size 96 x96 mm,Current Transformer of suitable rating - Set of three(g) Electrolyte Aluminium busbars PVC colour sleeved 600 Amps capacity TPN mounted on hygroscopic insulator duly colour coded RYB & Green sleeves MAKE: L&T/ Milestone/ Advance/ Unilec/ C&S/ Schneider /any CPRI approved manufacturerNote: All MCCBs are of thermal megnetic release withadjustable type overload protection, shortcircuit protection. |
| 55 | Supply, fabricated, install, test, and commissioning LT outdoor panel weather proof, dust/vermin proof, made out of 3.15mm thick CRCA sheet double openable door with angle iron frame and locking arrangement , including bus bar suitable for 3 phase 4 wire system, 415v, 50Hz, AC supply wth bus bar aluminium 500 Amps capacity including with PVC sleeves / taps RYB colours for phases indication, confirming to IP-54, and fixed on raised PCC platform with PCC 1:2:4, type B1 (20 mm graded aggregate) raised base with control wiring and compressing cable gland brass, copper/brass lugs etc confirming to CPRI approved manufacture complete all as specified and directed by the Engineer-in-charge including and accommodating the followings: |
| 56 | (a) MCCB 4 pole 200 Amps 50Hz, 415 V, 36 KA -01 no (for incoming)(b) MCCB 4 pole 100 Amps 50Hz, 415 V, 25 KA -02 no (for Outgoing)(c) MCCB 4 pole 63 Amps 50Hz, 415 V, 25 KA -02 no (for Outgoing)(d) LED type three Phase indicator with controlling fuses for RYB -01 set(e) 3 Phase Digital panel meter for Amp,Volt,KWH, power factor and other parameter,selector switch flush mounting of size 96 x96 mm,Current Transformer of suitable rating - Set of three(f) Electrolyte Aluminium busbars PVC colour sleeved 300 Amps capacity TPN mounted on hygroscopic insulator duly colour coded RYB & Green sleeves (g) Changeover onload type 200 Amps-01 NoNote:- All MCCBs are of thermal megnetic release with adjustable type overload protection, short circuit protection. |
| 57 | Supply, fabricated, install, test, and commissioning LT outdoor panel weather proof, dust/vermin proof, made out of 3.15mm thick CRCA sheet double openable door with angle iron frame and locking arrangement , including bus bar suitable for 3 phase 4 wire system, 415v, 50Hz, AC supply wth bus bar aluminium 300 Amps capacity including with PVC sleeves / taps RYB colours for phases indication, confirming to IP-54, and fixed on raised PCC platform with PCC 1:2:4, type B1 (20 mm graded aggregate) raised base with control wiring and compressing cable gland brass, copper/brass lugs etc confirming to CPRI approved manufacture ,complete all as specified and directed by the Engineer-in-charge including and accommodating the followings: |
| 58 | (a) MCCB 4 pole 350 Amps 50Hz, 415 V, 36 KA -01 no (for incoming)(b) MCCB 4 pole 100 Amps 50Hz, 415 V, 25 KA -02 no (for Outgoing)(c) MCCB 4 pole 63 Amps 50Hz, 415 V, 25 KA -02 no (for Outgoing)(d) LED type three Phase indicator with controlling fuses for RYB -01 set(e) 3 Phase Digital panel meter for Amp,Volt,KWH, power factor and other parameter, selector switch flush mounting of size 96 X 96 mm,Current Transformer of suitable rating - Set of three(f) Electrolyte Aluminium busbars PVC colour sleeved 500 Amps capacity TPN and mounted on hygroscopic insulator duly colour coded RYB & Green sleeves Note: All MCCBs are of thermal megnetic release withadjustable type overload protection, short circuit protection. |
| 59 | Supply, fabricated, install, test, and commissioning LT outdoor panel weather proof, dust/vermin proof, made out of 3.15mm thick CRCA sheet double openable door with angle iron frame and locking arrangement , including bus bar suitable for 3 phase 4 wire system, 415v, 50Hz, AC supply wth bus bar aluminium 300 Amps capacity including with PVC sleeves / taps RYB colours for phases indication, confirming to IP-54, and fixed on raised PCC platform with PCC 1:2:4, type B1 (20 mm graded aggregate) raised base with control wiring and compressing cable gland brass, copper/brass lugs etc confirming to CPRI approved manufacture ,complete all as specified and directed by the Engineer-in-charge including and accommodating the followings: |
| 60 | (a) MCCB 4 pole 100 Amps 50Hz, 415 V, 36 KA -01 no (for incoming)(b) MCCB 4 pole 63 Amps 50Hz, 415 V, 25 KA -02 no (for Outgoing)(d) LED type three Phase indicator with controlling fuses for RYB -01 set(e) 3 Phase Digital panel meter for Amp,Volt,KWH, power factor and other parameter, selector switch flush mounting of size 96 x96 mm,Current Transformer of suitable rating - Set of three(f) Electrolyte Aluminium busbars PVC colour sleeved 300 Amps capacity TPN mounted on hygroscopic insulator duly colour coded RYB & Green sleeves Note: All MCCBs are of thermal megnetic release with adjustable type overload protection, short circuit protection. |
| 61 | Supply, fabricated, install, test, and commissioning LT outdoor panel weather proof, dust/vermin proof, made out of 3.15mm thick CRCA sheet double openable door with angle iron frame and locking arrangement , including bus bar suitable for 3 phase 4 wire system, 415v, 50Hz, AC supply wth bus bar aluminium 600 Amps capacity including with PVC sleeves / taps RYB colours for phases indication, confirming to IP-54, and fixed on raised PCC platform with PCC 1:2:4, type B1 (20 mm graded aggregate) raised base with control wiring and compressing cable gland brass, copper/brass lugs etc confirming to CPRI approved manufacture , complete all as specified and directed by the Engineer-in-charge including and accommodating the followings: |
| 62 | (a) MCCB 4 pole 250 Amps 50Hz, 415 V, 36 KA -01 no (for incoming)(b) MCCB 4 pole 160 Amps 50Hz, 415 V, 36 KA -01 no (for Outgoing)(c) MCCB 4 pole 100 Amps 50Hz, 415 V, 25 KA -01 no (for Outgoing)(d) MCCB 4 pole 63 Amps 50Hz, 415 V, 25 KA -02 no (for Outgoing)(e) LED type three Phase indicator with controlling fuses for RYB -01 set(f) 3 Phase Digital panel meter for Amp,Volt,KWH, power factor and other parameter flush mounting of size 96 x96 mm,Current Transformer of suitable rating - Set of three(g) Electrolyte Aluminium busbars PVC colour sleeved 400 Amps capacity TPN mounted on hygroscopic insulator duly colour coded RYB & Green sleeves Note: All MCCBs are of thermal megnetic release with adjustable type overload protection, short circuit protection. |
| 63 | Supply & fix in replacement spreder terminal suitable for up to 4 pole 400 amps including nuts, bolts and washers complete all as specified and as directed. |
| 64 | M&L in replacement door latches for LT panels of suitable size including cutting and welding and brazing complete all as specified and directed by Engineer-in-Charge. |
| 65 | Supply and fixing copper strip 20mm X 3.15 mm with fixing screws for conductors/ earth lead including brazing and nut bolts jointing at all joints for building/ equipment laid through pipe/ trench/ surface including taking down old one complete all as specified and directed. |
| 66 | S & F in repairs Anodised aluminium bus bar of required size as per site, after making necessary modifications in existing feeder pillar, change over switch, etc. with necessary lugs complete all as specified and as directed Please Enable Macros to View BoQ information |
