|
| 1 | Taking down chowkats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 sqm each complete all as specified and directed. |
| 2 | Taking down shutter of any description exc 1sqm but not exc 2 Sqm each and removing unserviceable materials from site of work complete all as specified and directed. |
| 3 | M&L for factory made Pressed steel frames 125 x 60 x 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock, strike plate,etc complete including PCC (1:3:6) type C-0 (using 12.5 mm graded stone aggregate) as in filling hollow portion of frame complete all as specified and directed. |
| 4 | M&L for factory made Pressed steel frames 105 x 60 x 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock, strike plate,etc complete including PCC (1:3:6) type C-0 (using 12.5 mm graded stone aggregate) as in filling hollow portion of frame complete all as specified and directed. |
| 5 | M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding of hold fast , filling in door frames etc including desterb surfase of existing pogition complete all as specified and directed |
| 6 | M&L for 10 mm thick SmartCare ready mix plaster for Internal surface is a specially designed ready to use cement based plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering on bricks, block, stone walls over a coat of single component polymer as well as concrete surfaces. complete all as specified and directed. |
| 7 | S&F Factory made flush shutter 35 mm thick solid core construction with block board core and plywood face panels commercial type complete all as specified & directed. |
| 8 | S&F 35 mm thick, factory made , llnd class hard wood (Sal) glazed and skeleton shutter open rebated and prepared to receive glass, gauze, etc. (with out sash bars), edges of framing plain, charmfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part l, section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed. |
| 9 | M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width or girth including preparation of new or previously untreated wood surfaces complete all as specified. |
| 10 | M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 11 | S&F 100 mm long stainless steel hinges type B-12 and fixed with screw/ welding complete all as specified and directed. |
| 12 | S&F stain less steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed |
| 13 | S&F 200 mm long stainless steel barrel tower bolt of extruded section complete all as specified & directed. . |
| 14 | S&F 300mm stainless steel Sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections fixed complete all as specified and directed. . |
| 15 | S&F 150 mm long stainless steel handle cast type complete all as specified and directed. . |
| 16 | S&F Floor door stopper 150 mm long of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor complete all specified and directed. . |
| 17 | M&L for door seal not less than100 mm width complete all as specified and directed. |
| 18 | M&L for taking down and refixing in same opening wood shutter exc 1 sqm but not exc 2.00 sqm including easing & adjusting and refixing with same hardware complete all as specified and directed. |
| 19 | Taking down chowkats or frame with shutter (without taking off shutters from the frame) n exc 1.5 Sqm each complete all as specified and directed. |
| 20 | S&F of factory made soild PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube , supplying & fixing in opening as per specification and drawing complete all as specified & directed. . |
| 21 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. . |
| 22 | S&F 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified & directed. . |
| 23 | M&L 100 mm long aluminium anodized handle cast type complete all as specified and directed. . |
| 24 | Eco-4000 Series windows fabricated from roll formed sections made of Galvanized steel colour coated/powder coated (Base steel as per IS 513\\"D\\" quality, galvanized as per IS 277 with finc of 120 gms/ sqm) with total coated thickness of 0.60mm. Sections shoulld be with primer coat of epoxy primer of 5-7 microns, or powder coated with pure polyester powder up to 50-60 microns thick. Section for frame should be of 72mmx50mm, section for mullion should be of 72mm x50mm, section for shutter frame should be of 47mmx20mm, section for fixed glass bead shoulld be of 12mmx12mm and section for fly mesh shoulld be of 40mmx20mm. Each glazed shutter and mesh shutter shoulld be provided with SS pivot hinges-1 set sec color handle and stay. Each glazed shutter and fixed glass portions should be provided with a glass of 5mm plain float glass. Mesh shutter should be provided with stainless steel 32 guage fly mesh of 304 grade with 144 holes per sq.In. Window should be provided with grill made of 10mm sq MS bars welded to at 150mm centre to centre, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws. |
| 25 | Eco-4000 Series Ventilator fabricated from roll formed sections made of Galvanized steel colour coated/powder coated (Base steel as per IS 513\\"D\\" quality, galvanized as per IS 277 with finc of 120 gms/ sqm) with total coated thickness of 0.60mm. Sections shoulld be with primer coat of epoxy primer of 5-7 microns, or powder coated with pure polyester powder up to 50-60 microns thick. Section for frame should be of 72mmx50mm, section for mullion should be of 72mm x50mm, section for shutter frame should be of 47mmx20mm, section for fixed glass bead shoulld be of 12mmx12mm and section for fly mesh shoulld be of 40mmx20mm. Each glazed shutter and mesh shutter shoulld be provided with SS pivot hinges-1 set sec color handle and stay. Each glazed shutter and fixed glass portions should be provided with a glass of 5mm plain float glass. Mesh shutter should be provided with stainless steel 32 guage fly mesh of 304 grade with 144 holes per sq.In. Window should be provided with grill made of 10mm sq MS bars welded to at 100mm centre to centre, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws. |
| 26 | S&F Aluminium powder Coated (minimum thickness of powder coating 50 micron) frames for doors,windows, ventilators and partition with one or more rebates including joining cleats for fixing etc. complete all as specified and directed. |
| 27 | S&F Aluminium powder Coated (minimum thickness of powder coating 50 micron) door , window & ventilator shutters, aluminium section weighing 0.55Kg/m including necessary joining cleats, glazing clips, rubber neoprane packing, handles 2 Nos in each door leaf, hinges,100 mm tower bolt,door stopper, and 75 mm mortice lock, anodised aluminium snap beading screws etc. complete all as specified and directed. |
| 28 | S&F 4mm thick aluminium composite panel one side with decorative choice lamination & other side balancing white lamination, for cup board shelf fixed with screws to aluminium frame, timber frame/welding to steel frame work incl all around aluminium beading with rubber gascut complete all as specified and directed. |
| 29 | S&F 4.8 mm thick sheet glass, ordinary quality and glazing in squares exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 30 | M&L for repair of HDHMR (High Density High Moisure resistent) both side laminated board of thickness 18 mm ,exterior grade, fixed to timber frame/brick/ concrete surface with screws as incupboard ,cupboard shelves,shutters,frames, kitchen cabinets including suitable lipping etc complete all as specified and directed. |
| 31 | S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised,width of flap (when open ) 32 mm complete all as specified and directed. |
| 32 | S&F auto closing hinges 35 mm of 0 crank( KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and directed. |
| 33 | S&F Magnetic Catcher as in ‘Kitchen Cabinets’ Cupboards, Bath Cabinets complete all as specified and directed. |
| 34 | S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 35 | M&L for Welding in repairs n.exc 2.5 cm in length and n. exc 6mm thick complete all as specified & directed. |
| 36 | M&L for Welding in repair exc 2.5 cm but n.exc 5.0 cm length and n exc 6mm thick complete all as specified & directed. |
| 37 | S&F in repairs 3 mm thick sheet glass ordinary quantity and glazing with oil putty in square not exceeding 0.5 Sqm in each panel complete all as specified and directed. |
| 38 | S&F in repairs 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed. |
| 39 | S&F in repairs stinless steel drapery rods, 25mm internal diameter including decorating type domes including rod holders heavy pattern fixing arrangement with drilling holes in walls supported with brackets etc complete all as specified and directed. |
| 40 | S&F in repair Double action Floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main of brass with stainless steel cover, governing pivot made of brass other parts are made of MS heavy duty etc complete all as specified and directed. |
| 41 | S&F in repair 4 mm thick sheet glass, ordinary quality and fixed with aluminum beading and gaskit suitable for aluminum frames in squares not exceeding 0.5 sqm in each pane complete all as specified and directed. |
| 42 | S&F in repairs rubber gasket for aluminium door and window complete all as specified and directed. |
| 43 | S&Fin repairs Brass Mortice latch 75mm length with four levers (vertical type), aluminium anodised body complete all as specified and directed. |
| 44 | Dismantling MS work of any description not otherwise provided for complete all as specified & directed |
| 45 | S&F in repairs Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 |
| 46 | S&F in repair cast iron Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 47 | Taking down and refixing of aluminium shutter in the same position after repairing and making it smooth functional including replacement of unserviceable top pivot and adjustment of floor door stopper (size of shutter n.exc 2.50 sqm each) replacing including provision of unservicable hinge, handle, lock, aluminium plate & floor door stopper complete all as specified and directed. |
| 48 | S&F in repairs 2nd class hard wood plain fillets, square, rectangular in section, sectional area exe 13 sqcm & n. exe 25 sqcm clean sawn, secured with nails or brads complete all as specified. |
| 49 | Dismantling of floor, hearth or wall tiles / terrazo/mozaic/Granite (floor,dado) including cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises, all as specified and directed. |
| 50 | M&L glazed ceramic coloured tiles of size 450x300x7mm thick, as in skirting/dado set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 10mm thick cement screed bed of CM (1:4) complete all as specified & directed. |
| 51 | M&L Non skid coloured Joint free tiles 7 to 8 mm thick ( square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm ,in floors etc.set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed. |
| 52 | M&L vetrified ceramic tiles 10 mm thick (square/rectangular) area of each tile exceeding not exc. 0.36Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed. |
| 53 | M&L vetrified ceramic tiles 10 mm thick (square/rectangular) area of each tile exceeding not exc. 0.36Sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick rendering in CM (1:4) complete all as specified and directed. |
| 54 | Demolition of brick work built in cement or cement lime mortar incl all quoins, arches, pillars etc, complete all as specified & directed |
| 55 | M&L for brick work with sub class ‘B’ brick, straight curved on plan exc 6m mean radius built in cm (1:6) using old size bricks complete all as specified and directed. |
| 56 | Taking down of plaster from wall/ celing and soffits of chajja etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed. |
| 57 | M&L for 10 mm thick SmartCare ready mix plaster for Internal surface is a specially designed ready to use cement based plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering on bricks, block, stone walls over a coat of single component polymer as well as concrete surfaces. complete all as specified and directed. |
| 58 | M&L for 10 mm thick SmartCare ready mix plaster for external surface is a specially designed ready to use cement based plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering on bricks, block, stone walls over a coat of single component polymer as well as concrete surfaces. complete all as specified and directed. |
| 59 | M&L for preparation of newly plastered wall surface and applying two coats oil bound distemper a coat of 2 mm thcik wall interior wall care putty and a coat of primer.complete all as specified and directed. |
| 60 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer at any height (n.Exc 11m )incl necessary scaffolding /Centreing etc complete all as specified and directed. |
| 61 | S&F in repairs Toughned glass 12mm thick incl top pivot, bottom patch, top patch, H type handel and patch lock including cutting to shape, drilling holes required and fixing to wall and make good to wall including selective logo film as directed by GE. |
| 62 | S&F in repair cupboard drawer channel set complete all as specified and directed . |
| 63 | S&F in repair stain less steel peg set of six complete all as specified and directed. |
| 64 | S&F PVC wall lining consisting of 8-10 mm thick wooden grain printed PVC sheet inclusive of solvent cement and fixing channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, at site on wall/ceiling including dismantling all as per specification and complete all as specified and directed. |
| 65 | S&F in repair looking mirror 5.50mm thick of selected quality mounted on PVC frame and back fixed to wall with screw and rawl plugs complete all as specified and directed. |
| 66 | S&F in repair Aluminium alloy, anodised, 300 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 67 | S&F in repair 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed. |
| 68 | S&F in repair 150 mm long aluminium anodized handle cast type complete all as specified and directed. |
| 69 | S&F in repair Aluminium powder Coated (minimum thickness of powder coating 50 micron) frames for partation fixed type with sash bars, aluminium sections weighing 0.55 kg/m including 5mm ACP panel and 5mm thick glass necessary joining cleats, glazing clips, rubber packing, anodised aluminiumsnap beading, screws complete all as specified and directed. |
| 70 | S&F in repair Floor door stopper 150 mm long of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor complete all as specified and directed. Please Enable Macros to View BoQ information |
