|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE(I) Kanpur Name of Work : REPAIR/MAINT OF STEEL FURNITURE AND UPHOLSTERY OF SOFA SET AND PATTERN TRADE UNDER GE (I) KANPUR Contract No : GE(I)/KAN/T-38 OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Items/Works Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Almirah Steel med Steel/Almirah Med 1/2 H 1/2S (FD 67/1032)S&F following components of Almirah steel med including dismantling unservicable one complete all as specified and directed.(a) Lock with duplicate keys (Make of Lock- LICO/RINA) |
| 3 | (b) Handle 100 mm size chromium plated |
| 4 | (c) 3 way locking device with necessary fittings and painted with two coats of synthetic enamel paint of olive green/smoke grey shade of approved quality over and including a coat of primer. |
| 5 | (d) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with two coats of synthetic emamel paint of olive green/smoke grey shade of approved quality over and including a coat of primer. |
| 6 | (e) Supply and fix door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green/smoke grey/red or any shade as approved over and including a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing.(Note for steel painting;- All steel surface shall be done with spray painting)(Make of Lock-LICO/RINA) |
| 7 | (f) Supply and fix shelves made of 1mm thick CRCA sheet welded/riveted and painted with two coats of synthetic emamel paint of olive green/smoke grey/any shade as approved over and including a coat of primer. |
| 8 | (g) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required and applying two coats of (spray painting)synthetic enamel paint of olive green/Smoke Grey/ any shade of approved quality both inside and outside including dents/bends complete all as specified and as directed. |
| 9 | Almirah steel large/ Almirah steel large 1/2H 1/2S (FD-67/1031)S&F following components of Almirah steel med including dismantling unservicable one complete all as specified and directed.(a) Lock duplicate keys (Make of Lock-LICO/RINA) |
| 10 | (b) Handle 100 mm size chromium plated |
| 11 | (c) 3 way locking device with necessary fittings and painted with two coats of synthetic enamel paint of olive green/smoke grey/ any shade as approved over and including a coat of primer. |
| 12 | (d) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with two coats of synthetic emamel paint of olive green/smoke grey/ any shadeas approved over and including a coat of primer. |
| 13 | (e) Supply and fix door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with lock with duplicate keys- 01 No, key hole and painting with two coats of synthetic enamel paint of olive green/smoke grey/ any shade as approved over and including a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing (Make of Lock-LICO/RINA) |
| 14 | (f) Supply and fix shelves made of 1mm thick CRCA sheet welded/riveted and painted with two coats of synthetic emamel paint of olive green/smoke grey/ any shade of approved quality over and including a coat of primer. |
| 15 | (g) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty primer wherever required and applying two coats of synthetic enamel paint of olive green/Smoke Grey/ any shade as approved both inside and outside complete including dents/bends complete all as specified and as directed. |
| 16 | Locker Bed Side steel (FD-1029)S&F following components of Locker steel including dismantling unservicable one complete all as specified and directed.(a) Handle 100 mm size chromium plated |
| 17 | (b) Hasp & staple 100mm chromium plated |
| 18 | (c) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with two coats of synthetic emamel paint of olive green/smoke grey/ any shade of approved quality over and including a coat of primer. |
| 19 | (d) S&F door shutters made of 1mm thick CRCA sheet including chromium plated handle 100mm size -01 No, chromium plated hasp & stapple of approved quality and painting with two coats of synthetic enamel paint of olive green/smoke grey/ any shade of approved quality over and including a coat of primer both inside and outside after preparation of surface complete all as specified and as directed. |
| 20 | (e) S&F new curtain rod SS of size 20mm dia of 1.6mm wall thickness of locker steel |
| 21 | (f) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required and applying two coats of synthetic enamel paint of olive green shade/Smoke Grey/ any shade of approved quality both inside and outside complete including dents/bends complete all as specified and as directed. |
| 22 | Table dining 900x 900 mm steel (FD-1009)S&F following components of Table dinning 900x900 mm steel including dismantling unservicable one complete all as specified and directed.(a) Leg/stiffener 25 x 25 x 1.6 mm thick MS squire pipe duly welded to the frame including minor repairs to the table and painting the replaced portion. |
| 23 | (b) Table top made of pre-laminated MDF board exterior grade 18mm thick post-formed with 0.6 mm thick laminated in Mohigni/Walnut colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine and all as shwon on drawing complete all as specified and directed.. |
| 24 | (c) Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying two coats of synthetic enamel paint of olive green shade of approved quality. |
| 25 | (d) PVC shoe |
| 26 | Table office officer/clerk steel (FD-84/1003,1004 )S&F following components of Table office/clerk steel including dismantling unservicable one complete all as specified and directed..(a) Drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of olive green shade of approved quality over and including a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 6 lever to top drawer. |
| 27 | (b) Leg/stiffener 25 x 25 x 1.6mm thick MS square pipe duly welded to the frame and painted with two coat of synthetic enamel paint over and including a coat of primer. |
| 28 | (c) Lock with duplicate keys (Make- Lico/Rina) |
| 29 | (d) Complete box comprising of 03 drawers made of 1mm CRCA sheet including locking arrangement/accessories and painting with two coats of synthetic enamel paint of olive green shade of approved quality over and including a coat of primer/putty ofTable office Officer/Clerk Steel. |
| 30 | (e) Top of table office officer steel shall be made of pre-laminated MDF board exterior grade 18mm thick post-formed with 0.6 mm thick laminated in Mohigni/Walnut colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine and all as shwon on drawing complete all as specified and directed.. |
| 31 | (f) Top of Table Office Clerk Steel shall be made of pre-laminated MDF board exterior grade 18mm thick post-formed with 0.6 mm thick laminated in Mohigni/Walnut colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine and all as shwon on drawing complete all as specified and directed. |
| 32 | (g) PVC shoe |
| 33 | (h) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying two coats of synthetic enamel paint of olive green/Smoke Grey/any shade as approved both inside and outside complete all as specified and as directed for Table office officer steel. |
| 34 | (j) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying two coats of synthetic enamel paint of olive green/Smoke Grey/ any shade of approved both inside and outside complete all as specified and as directed for Table office clerk Steel. |
| 35 | Chair steel tubular with/ without arms (FD-75 M)S&F following components of Chair steel tubular with/ without arms made out of shisham wood french polished duly plastic canned in 'Godrej' pattern with plastic cane 2mm width and borders with 4mm wide plastic cane fixed with screws 4 Nos and nuts to the chair frame complete all as per drawing. including dismantling unservicable one complete all as specified and directed..(a) Seat frame |
| 36 | (b) Back frame |
| 37 | (c) Handle made of shisham wood duly french polished and fixed to the chair tubular with arms with screws of suitable size. |
| 38 | (d) MS Flat size 25 x 25 x 4mm thick welded at corner at bottom of the seat only to support and screwed with the seat . |
| 39 | (e) Preparation of surfaces and painting with two coats of synthetic enamel paint OG colour to chair steel tubular with/without arms including 4 Nos of PVC bushes to the bottom of the chair frame and 2 Nos of PVC caps on the top of the frame. |
| 40 | Table Dining ORs (FD-165) Removing of old unserviceable top of table dining ORs and S&F new top made of pre-laminated MDF board exterior grade 18mm thick post-formed with 0.6 mm thick laminated in Mohigni/Walnut colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine and all as shwon on drawing complete all as specified and directed. |
| 41 | Taking out of unserviceable stiffner and S&F new stiffner of mild steel square tube as per existing shape and size of Table dining ORs. |
| 42 | Preparation of old painted steel sufaces of table dining ORs by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coats of olive green/black colur/shade of approved synthetic enamel paint including fixing of four Nos of PVC shoes to each leg. |
| 43 | Chair Verandah(FD-256) Preparation of steel tubular frame surfaces with emery paper and applying two coats of synthetic enamel paint of white colour of approved quality and recaning the chair fully both seat and back with new plastic cane, white, half round of size 4mm wide including providing new suitable 04 Nos PVC shoes to the each leg of approved quality. |
| 44 | Teapoy Varandah (FD-255/383)Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coats of white synthetic enamel paint including four Nos PVC shoes. |
| 45 | (b) Removing old U/s table top and S/F top made of pre-laminated MDF board exterior grade 18mm thick post-formed with 0.6 mm thick laminated in Mohigni/Walnut colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine and all as shwon on drawing complete all as specified and directed.. |
| 46 | Table 3'x2' with/without drawer steel FD-283, 1008, 223, 310, 1007 S&F following components of Table dinning 900x900 mm steel including dismantling unservicable one complete all as specified and directed..(a) Leg/stiffener 25 x 25 x 1.6mm thick MS square pipe duly welded to the frame including minor repairs to the table and painting the replaced portion. |
| 47 | (b) Table top made of pre-laminated MDF board exterior grade 18mm thick post-formed with 0.6 mm thick laminated in Mohigni/Walnut colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine and all as shwon on drawing complete all as specified and directed.. |
| 48 | (c) Taking out of unserviceable drawer and S&F of new drawer of mild steel square tube 25mm as per existing shape and size complete all as per Drg. |
| 49 | (d) Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of olive green/smoke grey/ any shade of approved quality. |
| 50 | (e) PVC shoe |
| 51 | Chair visitors /Chair Writing MAP Trade Pattern(a) Chair visitors of different Make and Model (SEAT & BACK) and re-upholstering with new tapestry/ (approved quality) including dismantling of old one complete all as specified and dircted. |
| 52 | (b) Supply and Fix New SEAT & back (Cushion,tapestry & ply) 50mm thick cushion complete (approved quality) of different make and model including dismantling of old one complete all as specified and dircted. |
| 53 | (c) Supply and fix handle of chair visitors of (soft/PV) suitable size and design as per original Pattern of different Make and Model including dismantling of old one complete all as specified and as directed. |
| 54 | (d) M&L for painting two coats of synthetic enamel paint to be match as per old/existing colure in Iron frame of Chair visitor of various Make & Models including scraping old painted/rusted parts by emery paper all as specified and as directed. |
| 55 | Chair Revolving executives High Back TP Trade Pattern(a) Chair Revolving of different Make and Model (SEAT & BACK) and re-upholstering with new tapestry/ (approved quality) including dismantling of old one complete all as specified and dircted. |
| 56 | (b) Supply and Fix New SEAT & back (Cushion,tapestry & ply) 50mm thick cushion complete (approved quality) of different make and model including dismantling of old one complete all as specified and dircted. |
| 57 | (c) Supply and Fix New high quality caster wheel as per sample approved by Engr-in-Charge for chair revolving high back including dismantling of old one complete all as specified and dircted. |
| 58 | (d) Supply and Fix New hydraulic as per sample approved by Engr-in-Charge for chair revolving high back including dismantling of old one complete all as specified and dircted. |
| 59 | (e) Supply and Fix New seat base plate as per sample approved by Engr-in-Charge for chair revolving high back including dismantling of old one complete all as specified and dircted. |
| 60 | (f) Supply and fix handle of chair revolving high back of (soft/PV) suitable size and design as per original Pattern of different Make and Model including dismantling of old one complete all as specified and as directed. |
| 61 | (g) M&L for painting two coats of synthetic enamel paint to be match as per old/existing colure in Iron frame of Chair revolving high back of various Make & Models including scraping old painted/rusted parts by emery paper all as specified and as directed. |
| 62 | REPAIR OF SOFA SET FD-281M&L for removing old unserviceable/ wornout cushion and tapestry cloth from sofa set 5 seater (Set consisting of 10 pieces of cushion) and supply of new cushion of size 580x 530x 100 mm thick make : sleep Well/Kurl-on/Duroflex with 40 density as approved by GE and cushion covered with tapestry cloth of approved shade & quality over a cover of lining cloth duly covered and streeched over the cushions complete in all as specified and as directed by Engr-in-Charge. (Cost of the tapestry cloth incorporated in the work shall be of not less than Rs. 400/- per meter) FD-281 |
| 63 | All as per item No. 61 above but sofa set 4 seater (consisting of 8 pieces of cushion). FD-281 |
| 64 | M&L for taking down decayed wooden long rail of sofa set three seater and S&F new long rail of same size made out of 2nd class HW (Shisham) and all as shwon on drawing complete all as specified and directed. FD-281 |
| 65 | M&L for taking down decayed wooden short rail of sofa set three seater and Single seater and S&F new short rail of same size made out of 2nd class HW (Shisham) and all as shwon on drawing complete all as specified and directed. FD-281 |
| 66 | M&L for taking out unserviceable legs of sofa set, three seater and single seater and S&F new leg made out of 2nd class HW (Shisham) and all as shwon on drawing complete all as specified and directed. FD-281 |
| 67 | M&L for taking down decayed wooden front/side rail of sofa set single seater and S&F new front/side rail of same size made out of 2nd class HW (Shisham) and all as shwon on drawing complete all as specified and directed. FD-281 |
| 68 | M&L for taking out unserviceable side rail of sofa set three seater and S&F new side rail made out of 2nd class HW (Shisham) and all as shwon on drawing complete all as specified and directed. FD-281 |
| 69 | M&L for taking out unserviceable Arms of sofa set three seater and single seater and S&F new arm made out of 2nd class HW (Shisham) and all as shwon on drawing complete all as specified and directed. FD-281 |
| 70 | M&L for taking down decayed wooden front supporting long rail of sofa set single seater and S&F new long rail of same size made out of 2nd class HW (Shisham) and all as shwon on drawing complete all as specified and directed. FD-281 |
| 71 | M&L for taking down decayed wooden bottom / rear supporting rail of sofa set single seater and S&F new bottom/rear supporting rail of same size made out of 2nd class HW (Shisham) and all as shwon on drawing complete all as specified and directed. FD-281 |
| 72 | M&L for taking down decayed wooden bottom / rear supporting rail of sofa set three seater and S&F new of same size made out of 2nd class HW (Shisham) and all as shwon on drawing complete all as specified and directed. FD-281 |
| 73 | M&L for preparation of wooden surfaces of the following furniture by scraping with sand paper, redusting and apply putty whereever required and polishing the surfaces with french polish to get glossy finish for Sofa set 05 seater complete all as specified and directed. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
