|
| 1 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).(A) In 10-12 Micron thickness Annodizing filmNatural whiteFixed partitions. (Unsupported length of vertical member upto 1.5 mtr. Height of both ends of vertical member restrained but panels within 0.9 sq.m.) i ) Top , bottom & side member. |
| 2 | ii) Intermediate member. |
| 3 | iii) Glazing clip. |
| 4 | Movable door shutteri) Shutter i) Top rail |
| 5 | ii) Bottom rail. |
| 6 | iii) Lock rail |
| 7 | (iv) Door vertical. |
| 8 | Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge. For sliding windows U' shaped EPDM gasket for frames. |
| 9 | Providing and fixing interior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the eriphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating) |
| 10 | Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:-. Partly glazed and partly panelled partition or fixed glazing made of extruded and anodised alloy aluminium sections, fabrications after cutting to proper shape and size, drilling and aligning fitted with inbuilt locking arrangement cutting the glass / board (prelaminated / particle / block) to requisite shape and size moulding the edges fitted and fixed glazing clips and dry set neoprine /EPDM gasket, along with all other necessary Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:-. arrangements for fixing the partition to walls, floors, beams, columns polysulphide sealant for water proofing if necessary complete in all respect as per drawing and specifications and direction of the Engineer in charge. The rate includes the hire charge of all tools and plants, adhesive, joineries such as screw, fastener but excluding the cost of extruded aluminium sections, EPDM gasket, glass, board, glazing clips, locking arrangement, etc. For partitions using section of size: 63.50 mm x 38.10 mm |
| 11 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. 5mm thick Coloured/Tinted/Smoke glass |
| 12 | Supplying aluminium flat angle , cutting floor, cuttimg plaster etc. |
| 13 | Supplying 4 lever mortice lock or any approved make and brand as perdirection of the Engineer- in -Charge. i) 150 mm. |
| 14 | Supplying 125 mm. Dia acrylic handle for aluminium door as per approved make & brand. Natural Colour |
| 15 | Add GST @ 18% (Eighteen Percentage) over item no. 1 to 09=Rs. |
| 16 | Add Labour Welfare Cess @ 01% (One Percentage) over item no. 1 to 10=Rs. Please Enable Macros to View BoQ information |
