|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All Kinds of soil |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering ,lead up to 50 m and lift upto 1.5 m. |
| 3 | Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.Ali kinds of soil. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 5 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 6 | Centering and shuttering including strutting, proping etc. and removal of form work for:Foundations, footings, bases for columns |
| 7 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level Concrete of M30 grade with minimum cement content of 350 kg /cum |
| 8 | Add for using extra cement in the items of design mix over and above the specified cement content therein. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns, etc. for mass concrete. |
| 10 | Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 11 | Extra for shuttering in circular work (20% of respective centering and shuttering items)Columns |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 13 | 6MTR DECORATIVE POLE WITH DOUBLE ARM UPRT BRACKET (without Light Fixture) Made out of GI Pipe & Cast iron as per customer Drawing with Base Plate Size 400X400x16mm, CI Base & CI barcket with trident Laser cut design & Control Box at the bottom of the pole for space for Housing MCB & Terminal strip etc. Specification of Pole Sections: 1st Section - CI Base & Ø114mm 2nd Section - Combination of CI piller, middle decorative part & GI pipe Ø114mm with Double Arm upright cast iron Bracket with matal fabricated design, With Polyurthane Painted as per your given color shade, The GI pole should be provided with an in built junction box to fix 63A connectors and 6A MCB, at the bottom - the inbuilt box should have a flush door of suitable size. Pole & it's part are painted in 3 layer coating in which 1st layer with etch primar, 2nd layer with epoxy primer & 3rd final layer with PU paint make: Jaquar/Twinkle/K-Lite or equivalent and per direction of in engineer incharge |
| 14 | Supply of Decorative Post Top, Top Mounting Light decorative luminaire, body made out of Cast & Spun Aluminium having 310X310mm and height 650mm with IP 65 optical compartment, lower bowl in UV stablised frosted acrylic but in CONICAL SHAPE , integral control gear having BIS approved Fulham make electronic constant crrent driver and LM80 complianed SEOUL/BRIDGELUX make LED module street light in 50W complete with PTTURAIFD050WWT0 all accessories, top mouning,suitable for 48mm ID pole n pipe.fixture made of pressure die cast/Aluminum Spun housing with front opening PC diffuser having IP65 protection, PF>.90 , Lumen-70/w with High Efficiency LED, THD-10%, potted driver with 4/6kva surge Protection |
| 15 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 16 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. |
| 17 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 18 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centring, shuttering, finishing and reinforcement as per direction of the engineer-in charge; Concrete of M25 grade with minimum cement content of 330 kg /cumAll works up to plinth level |
| 19 | Centring and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete |
| 20 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 21 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 22 | Steel work in built up tubular (round, square or rectangularhollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approvedsteel primer, including welding and bolted with specialshaped washers etc. complete. Hot finished seamless typetubes |
| 23 | Stone work (CNC carved as per detail) moulded or sunk and moulded upto floor five level as dry cladding using SS cramps of weight not less than 260 grams including pointing/jointing with matching pigment+admixture - Red sand stone |
| 24 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 16 mm dia x 160 mm long double threaded 6.8 grade , Nut-Bolt head, comprising of 16 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. |
| 25 | Applying breathable, non-reactive, antifungal, and water repellant Silane/Siloxane chemical as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacture, diluted with solvent mineral Turpentine oil in the ratio of 1:12 (One part of approved chemical :12 Part of Turpentine oil), on the existing sand stone masonry surface with two or morecoats to give uniform application of chemical on the surface, all complete as per direction of Engineer-In-charge |
| 26 | Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. - 40 mm dia |
| 27 | Supplying, Installation, Testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. 2 output per phase and suitable for single phase supply |
| 28 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required |
| 29 | Supplying and Laying of 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with nut, bolt, spring, washer etc. as required.( jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 30 | Supplying and Laying of 6 SWG G.I wire at 0.50 metre below ground level for conductor earth electrode, including connection / terminating with G.I. thimble etc. as required. |
| 31 | Supply, laying, testing and commissioning of 1.1 kV grade, XLPE insulated, PVC sheathed, aluminum conductor, steel armoured cable, with all required accessories, including excavation of trench, sand cushioning, backfilling, clamping onwall/pole/tray, and termination at both ends with suitable cable glands, lugs and ferrules as required for proper completion of work :- Make :- Polycab,Havells,KEI,Gloster, Finecab or equivalent4CX 10 Sq.mm |
| 32 | 2CX 6 Sq.mm |
| 33 | 4CX35 Sq.mm |
| 34 | Supply, installation, testing and commissioning of outdoor type, IP-65 rated feeder pillar panel fabricated from 14/16 SWG CRCA sheet steel, dust and vermin proof, suitable for 415V, 3-phase, 4-wire, 50Hz AC supply system, comprising 1 No. 63A TPN MCCB (C type) as incomer and 3 Nos. 25A TPN MCBs as outgoing feeders, mounted on suitable angle ironframe/pedestal with proper earthing, cable termination, interconnections,timer,contactor,indication lamp, and all necessary accessories complete as required for proper functioning. |
| 35 | Supply, installation, testing and commissioning of outdoor type, IP-65 rated feeder pillar panel fabricated from 14/16 SWG CRCA sheet steel, dust and vermin proof, suitable for 415V, 3-phase, 4-wire, 50Hz AC supply system, comprising 1 No. 32A TPN MCCB (C type) as incomer and 3 Nos. 16A TPN MCBs as outgoing feeders, mounted on suitable angle ironframe/pedestal with proper earthing, cable termination, interconnections,timer,contactor,indication lamp, and all necessary accessories complete as required for proper functioning. |
| 36 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 37 | POST TOP Lamp 40W for STONE LIGHT Supply of Decorative Post Top Lamp, Top Mounting Light decorative luminaire, body made out of Aluminium Spun & Acrylic Difuser having 600mm Dia with IP 65 optical compartment, having BIS approved and LM80 complianed SEOUL/BRIDGELUX make LED module street light in 40W complete with all accessories, top mouning,diffuser having IP65 protection, PF>.90 , Lumen-70/w with High Efficiency LED, THD-10%, potted driver with 4/6kva surge Protection. Make: Jaquar Please Enable Macros to View BoQ information |
