Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dual desk with Seat (Desk size-1060mm x 450mm x 650mm & Seat size - 1060mm x 300mm x 335mm) [Drawing No.- TP] |
| 2 | Removing of old unserviceable top from desk and S & F new top of size 18\\" x 42\\" of desk made out of 18mm thick BWR plywood duly pasted with 1mm laminated sheed, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Mak : Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed. |
| 3 | Removing of old unserviceable front board from desk and S & F new front board of size 12\\" x 42\\" of desk made out of 18mm thick BWR plywood duly post formed, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed. |
| 4 | Removing of old unserviceable seat and S & F new seat of size 15\\" x 42\\" made out of 18mm thick BWR plywood duly post formed, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make - Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed. |
| 5 | Removing of old unserviceable back and S & F new back of size 8\\" x 42\\" made out of 18mm thick BWR plywood duly post formed, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed. |
| 6 | Welding to broken joints of dual desk with Seat complete all as specified and directed. |
| 7 | S&F in replacement PVC shoes to dual desk with Seatcomplete all as shown on drg complete all as specified and directed. |
| 8 | Dual desk with Seat (Desk size - 1060mm x 450mm x 650mm & Seat size - 1060mm x 300mm x 415mm) [Drawing No.- TP] |
| 9 | Removing of old unserviceable top from desk and S & F new top of size 18\\" x 42\\" of desk made out of 18mm thick BWR plywood duly post formed, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed. |
| 10 | Removing of old unserviceable front board from desk and S & F new front board of size 12\\" x 42\\" of desk made out of 18mm thick BWR plywood duly post formed, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed. |
| 11 | Removing of old unserviceable seat and S & F new seat of size 15\\" x 42\\" made out of 18mm thick BWR plywood duly post formed, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed. |
| 12 | Removing of old unserviceable back and S & F new back of size 8\\" x 42\\" made out of 18mm thick BWR plywood duly post formed, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed. |
| 13 | Welding to broken joints of dual desk with Seat complete all as specified and directed |
| 14 | S&F in replacement PVC shoes to dual desk with Seat complete all as shown on drg complete all as specified and directed. |
| 15 | Desk Steel [Drawing No.- FD-1021] |
| 16 | Removing of old unserviceable top from desk and S & F new top of size suitable to desk as shown on drawing made out of 18mm thick Prelaminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at open ends of top complete all as per drawing, as specified and or directed. |
| 17 | Removing of old unserviceable bottom from desk and S & F new bottom of size suitable to desk as shown on drawing made out of 18mm thick Prelaminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at open ends of bottom complete all as per drawing, as specified and or directed. |
| 18 | Removing of old unserviceable back from desk and S & F new back of size suitable to desk as shown on drawing made out of 18mm thick Prelaminated particle board, colour/ shade as approved by GE. Complete all as per drawing, as specified and or directed. |
| 19 | Removing of old unserviceable side from desk and S & F new side of size suitable to desk as shown on drawing made out of 18mm thick Prelaminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at open ends of bottom complete all as per drawing, as specified and or directed. |
| 20 | Welding to broken joints of desk complete all as specified and directed |
| 21 | S & F new front board to cover leg room of size 1270mm x 300mm to desk as shown on drawing made out of 18mm thick Prelaminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at open ends of bottom complete all as per drawing, as specified and or directed. |
| 22 | S&F in replacement PVC shoes to desk complete all as shown on drg complete all as specified and directed |
| 23 | Table 1800 x 1050MM [Drg No. CWE/M/I/27/95 or similar drawings] |
| 24 | Removing of old unserviceable top from table and S & F new top of size suitable to table as shown on drawing made out of 18mm thick Prelaminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at open ends of top complete all as per drawing, as specified and or directed. |
| 25 | Welding to broken joints of table complete all as specified and directed |
| 26 | S&F in replacement PVC shoes to table complete all as shown on drg complete all as specified and directed |
| 27 | Table Steel 1500 x 750MM [Drg No. CWE/M/F/26/95 or similar drawings] |
| 28 | Removing of old unserviceable top from table and S & F new top of size suitable to table as shown on drawing made out of 18mm thick Prelaminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make - Rehau/ Kinex shall be provided with mechanical fixing at open ends of top complete all as per drawing, as specified and or directed. |
| 29 | Welding to broken joints of table complete all as specified and directed |
| 30 | S&F in replacement PVC shoes to table complete all as shown on drg complete all as specified and directed |
| 31 | Side Rack Steel 3/4 Space [Drg No. FD-1023 & Similar drawings] |
| 32 | Welding to broken joints of desk complete all as specified and directed |
| 33 | M&L in repairs to shelves of side rack include tinkering/denting etc. complete all as per drawing, as specified and or directed. |
| 34 | Table 5' x 2'-10'' [Drawing No.- TP/ Similar] |
| 35 | Removing of old unserviceable top from table and S & F new top of size suitable to table as shown on drawing made out of 18mm thick Prelaminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make- Rehau/ Kinex shall be provided with mechanical fixing at open ends of top complete all as per drawing, as specified and or directed. |
| 36 | Welding to broken joints of table complete all as specified and directed |
| 37 | S&F in replacement PVC shoes to table complete all as shown on drg complete all as specified and directed |
| 38 | Table Centre Brass Frame with Glass Top TP [FD-375 & TP/ CWE DRGS] |
| 39 | Removing unserviceable Glass top of Table Centre and Supply and fixing new glass top tinted glass of smoke shade with 10 mm thickness of size 1200mm x 600mm duly grinded edges complete all as per drawing, as specified and or directed. |
| 40 | Removing unserviceable vacuum rubber shoes of Table Centre and Supply and fixing new vacuum rubber shoes for holding glass top complete all as per drawing, as specified and or directed. |
| 41 | Removing unserviceable anodised brass legs of Table Centre and Supply and fixing new anodised brass leg of 40mm dia complete all as per drawing, as specified and or directed. |
| 42 | Removing unserviceable anodised brass long rail of table centre and Supply and fixing new anodised brass long rail of 25mm dia complete all as per drawing, as specified and or directed. |
| 43 | Removing unserviceable anodised brass short rail of table centre and Supply and fixing new anodised brass long rail of 25mm dia complete all as per drawing, as specified and or directed. |
| 44 | S&F in replacement PVC shoes to table centre complete all as shown on drg complete all as specified and directed |
| 45 | Welding to broken joints of table centre brass complete all as specified and directed. |
| 46 | Table 6' x 3' - 6\\" [Drawing No.- TP/ Similar] |
| 47 | Removing of old unserviceable top from table and S & F new top of size suitable to table as shown on drawing made out of 18mm thick Prelaminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make- Rehau/ Kinex shall be provided with mechanical fixing at open ends of top complete all as per drawing, as specified and or directed. |
| 48 | Welding to broken joints of table complete all as specified and directed. |
| 49 | S&F in replacement PVC shoes to table complete all as shown on drg complete all as specified and directed. |
| 50 | TABLE O/OFFICER STEEL [Drg No. FD-1003/Similar] |
| 51 | Removing of old unserviceable top from Table Office Officer Steel and supply and fixing of new top made out of 18mm pre laminated particle board with colour/ shade as approved by Engr-in-Charge/ GE. 2mm thick PVC edge-binding of Make- Rehau/ Kinex shall be provided with mechanical fixing at open ends of top complete all as per drawing, as specified and or directed. |
| 52 | Removing of old unserviceable lock from Table Office Officers steel and S&F new lock with two keys all as shown on drawing and as directed. |
| 53 | Removing of old unserviceable drawer from Table Office Officers steel and supply and fixing the new drawer of same size and shape made out of 1mm thick MS black sheet all as shown on drawing and as directed complete all as specified and directed. |
| 54 | S & F in replacement 120mm long piece of 25 Sqmm MS tube having wall thickness of 1.6mm including welding to Table Office Officers complete all as specified and directed. |
| 55 | S&F in replacement PVC shoes to Table Office Officers steel complete all as shown on drg complete all as specified and directed. |
| 56 | Welding to broken joints of Table office officer's steel with drawer complete all as specified and directed. |
| 57 | TABLE O/CLERK STEEL & TABLE WRITING STEEL S/TOP [Drg No. FD-1004/TP/Similar/CWE SPL DRG] |
| 58 | Removing of old unserviceable top from Table and supply and fixing of new top made out of 18mm thick pre laminated particle board with colour/ shade as approved by Engr-in-Charge/ GE. 2mm thick PVC edge-binding of Make- Rehau/ Kinex shall be provided with mechanical fixing at open ends of top complete all as per drawing, as specified and or directed. |
| 59 | Removing of old unserviceable lock from Table and supply and fixing new lock with two keys all as shown on drawing complete all as specified and directed |
| 60 | Removing of old unserviceable drawer from Table and supply and fixing the new drawer of same size and shape made out of 1mm thick MS black sheet all as shown on drawing complete all as specified and directed. |
| 61 | S & F in replacement 100mm long piece of 25 Sqmm MS tube having wall thickness of 1.6mm including welding to Table steel complete all as specified and directed |
| 62 | S&F in replacement PVC shoes to Table steel complete all as shown on drg complete all as specified and directed |
| 63 | Welding to broken joints of Table steel with drawer all as directed. |
| 64 | TABLE 3' x 2' STEEL WITH DRAWER [Drg No. FD-1008/TP/Similar] |
| 65 | Removing of old unserviceable top from Table 3' x 2' steel with drawer and supply and fixing of new top made out of 18mm thick pre laminated particle board with colour/ shade as approved by Engr-in-Charge/ GE. 2mm thick PVC edge-binding of Make- Rehau/ Kinex shall be provided with mechanical fixing at open ends of top complete all as per drawing, as specified and or directed. |
| 66 | Welding to broken joints of Table 3' x 2' steel with drawer complete all as specified and directed |
| 67 | S&F in replacement PVC shoes to Table 3' x 2' steel with drawer complete all as shown on drg complete all as specified and directed |
| 68 | S & F in replacement 100mm long piece of 25 Sqmm MS tube having wall thickness of 1.6mm including welding to Table 3' x 2' steel with drawer complete all as specified and directed |
| 69 | Removing of old unserviceable lock from Table 3' x 2' steel with drawer and supply and fixing new lock with two keys all as shown on drawing complete all as specified and directed |
| 70 | Removing of old unserviceable drawer from Table 3' x 2' steel with drawer and supply and fixing the new drawer of same size and shape made out of 1mm thick MS black sheet all as shown on drawing and applying one coat of synthetic enamel olive green paint with spray painting (Internally and externally) over a coat of primer after preparation of surfaces complete all as specified and directed |
| 71 | TABLE 3' x 2' STEEL WITHOUT DRAWER [Drg No. FD-1007/TP/Similar] |
| 72 | Removing of old unserviceable top from Table 3' x 2' steel with drawer and supply and fixing of new top made out of 18mm thick thick pre laminated particle board with colour/ shade as approved by Engr-in-Charge/ GE. 2mm thick PVC edge-binding of Make- Rehau/ Kinex shall be provided with mechanical fixing at open ends of top complete all as per drawing, as specified and or directed. |
| 73 | Welding to broken joints of Table 3' x 2' steel without drawer complete all as specified and directed |
| 74 | S&F in replacement PVC shoes to Table 3' x 2' steel without drawer complete all as shown on drg complete all as specified and directed |
| 75 | S & F in replacement 100mm long piece of 25 Sqmm MS tube having wall thickness of 1.6mm including welding to Table 3' x 2' steel without drawer complete all as specified and directed |
| 76 | Table PC Work Station size 900mm x 600mm x 750mm [ Drg No. CWE/M/1/7/94 /TP/Similar] |
| 77 | Removing of old unserviceable top from Table PC Work Station and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make- Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed |
| 78 | Removing of old unserviceable bottom from Table PC Work station and supply and fixing the new bottom of same size made out of 18mm thick exterior grade pre-laminated particle board with allround PVC edging all as shown on drawing and as directed. |
| 79 | All as per srl item No. 14.01 here-in-before but vertical board on side of Table computer. |
| 80 | All as per srl item No. 14.01 here-in-before but keyboard tray of Table computer. |
| 81 | All as per srl item No. 14.01 here-in-before but drawer of Table computer. |
| 82 | All as per srl item No. 14.01 here-in-before but pull out mouse tray of Table computer. |
| 83 | Removing of old unserviceable telescopic channel of key board and supply and fixing new stainless steel telscopic channel to Table computer complete all as specified and directed by Engineer-in-Charge. |
| 84 | S&F new Nylon buffers to Table PC work station all as shown on drawing complete all as specified and directed. |
| 85 | S&F new knobs to Table PC Workstation all as shown on drawing complete all as specified and directed. |
| 86 | Welding to broken joints of table complete all as specified and directed |
| 87 | SOFA CHAIR SINGLE SEATER (TP) |
| 88 | Removing of old unserviceable seat springs and MS Rod of U Shape including old jute/ coir foam from the seat of sofa chair and S & F new Box frame (Top seat, bottom seat, Both Sides in taper shape, front side shall made of 18mm in U shape as suitable to sofa chair be provided) suitable to sofa single seater as shown on drawing and existing, made out of 18mm thick BWR grade plywood, colour/ shade as approved by GE. Complete all as per drawing, as specified and or directed. |
| 89 | Removing of old unserviceable back springs/ MS Rod of U Shape including old jute/ coir foam from the back of sofa chair and S & F new box in taper shape suitable to sofa single seater as shown on drawing and existing, made out of 18mm thick BWR grade plywood, colour/ shade as approved by GE. Complete all as per drawing, as specified and directed. |
| 90 | Removal of tapestry cloth from existing seat of sofa chair single seater and providing new cover of approved shade of Indian make of rate not less than Rs. 450/- per meter duly stitched and fixing all as per drawing and as directed. Complete all as specified and directed by Engr-in-charge (Sample of tapestry cloth shall be approved by the GE). |
| 91 | S & F of new foam of 40 D of size 100mm duly fixed and suitable to seat of sofa chair. Complete all as specified and directed by Engr-in-charge. |
| 92 | Removal of tapestry cloth from existing back of sofa chair single seater and providing new cover with 02 x No. crystal buttons of approved shade of Indian make of rate not less than Rs. 450/- per meter duly stitched and fixing all as per drawing and as directed. Complete all as specified and directed by Engr-in-charge (Sample of tapestry cloth shall be approved by the GE). |
| 93 | Removal of tapestry cloth from existing handle of sofa chair single seater and providing new cover of approved shade of Indian make of rate not less than Rs.450/- per meter duly stitched and fixing all as per drawing and as directed. Complete all as specified and directed by Engr-in-charge (Sample of tapestry cloth shall be approved by the GE). |
| 94 | S & F of new foam of 40 D of size 75mm duly fixed and suitable to back of sofa chair. Complete all as specified and directed by Engr-in-charge. |
| 95 | M&L for repair/ replacement with 12mm BWR plywood for Handle Box Type 'H' fixed to single-seater wooden sofa chair, including new foam pasting and replacement of rectangular handle/ spare parts, Complete all as specified and directed by Engr-in-charge. |
| 96 | S&F new SS legs in replacement old wooden legs to Sofa chair single seater complete all as shown on drg complete all as specified and directed. |
| 97 | BOOK CASE STEEL [FD-1028] |
| 98 | Replacement of damaged broken Glass pane 3mm and S&F with new 3mm thick glass pane as per drg complete all as specified and as directed by Engr-in-Charge. |
| 99 | Replacement of damaged/ unsv handle and S&F with new S/S Handle as per existing size, shape and as directed by Engr-in-Charge. |
| 100 | Replacement of old existing broken/ UNSV locks and in any position with S & F New locks with double keys fixing with suitable nuts including repair of locking device complete all as specified and directed by Engr-in-Charge. All as shown in drg. |
| 101 | LOCKER UNIT OF 10 LOCKERS STEEL CWE/M/F/23-95 |
| 102 | Replacement of old existing broken/ UNSV locks (Locks of size: 230mm high and drawer of size : 100mm high) of chest of drawer and in any position with S & F New locks heavy duty having 6 lever with double keys fixing with suitable nuts including repair of locking device complete all as specified and directed by Engr-in-Charge. All as shown in drg. |
| 103 | Replacement of old existing broken/ Unsv door handles of 100mm long CI chromium plated, complete with nuts & pins all as specified and as directed by Engr-in-Charge. All as shown in drg. |
| 104 | Replacement of old existing UNSV/ Damaged but hinges and Supply and fixing new MS but hinges of 75mm long heavy grade existing size, of approved quality complete all as per drawing and as directed by Engr-in-Charge. |
| 105 | TABLE 3' x 3' STEEL [Drg No. FD-1009/TP/Similar] |
| 106 | Supply & fixing in replacement of top made out of 18mm thick pre laminated particle board with colour/ shade as approved by Engr-in-Charge/ GE. 2mm thick PVC edge-binding of Make- Rehau/ Kinex shall be provided with mechanical fixing at open ends of top complete all as per drawing, as specified and or directed. |
| 107 | Welding to broken joints of Table 3' 3' steel complete all as specified and directed |
| 108 | S&F in replacement PVC shoes to Table 3' x 3' steel complete all as shown on drg complete all as specified and directed. |
| 109 | S & F in replacement 100mm long piece of 25 Sqmm MS tube having wall thickness of 1.6mm including welding to Table 3' x 3' steel complete all as specified and directed. |
| 110 | ALMIRAH MEDIUM STEEL FD-1032 |
| 111 | CP Handle : Removing of old unserviceable handles from Almirah medium steel and S&F new CP steel handle of exisiting size to Almirah medium steel all as shown on drawing complete all as specified and directed |
| 112 | Lock : Removing of old unserviceable lock from Almirah medium steel and S&F new lock of approved make, 06 lever with two keys to Almirah medium steel all as shown on drawing complete all as specified and directed |
| 113 | Locking Device : M&L for locking device and lock bar as required and as directed by Engr-in-Charge to Almirah med steel including making adjustment of door shutter & applying one coat of synthetic enamel paint over a coat of red-oxide primer after preparation of surfaces complete with spray machine all as shown on drawing complete all as specified and directed |
| 114 | Legs : Removing of old unserviceable leg from Almirah med steel and S&F new leg made out of 1mm thick MS black sheet (PBI) of existing size, shape and welding at appropriate points complete all as specified and directed by Enger-in-Charge |
| 115 | All as per srl item No. 19.04 here-in -before but bottom sheet of Almirah medium steel. |
| 116 | All as per srl item No. 19.04 here-in -before but shelf of Almirah medium steel. |
| 117 | Removing of old unserviceable butt hinges of Almirah medium steel and S&F new butt hinges 75mm long and adjusting door by revitting/ welding complete all as shown on drawing complete all as specified and directed |
| 118 | M&L for refixing of loose shelves with mild steel revitting/ spot welding complete all as specified and directed. |
| 119 | ALMIRAH LARGE STEEL 1/2 H, 1/2S FD/E6/MAP/18 |
| 120 | CP Handle : Removing of old unserviceable handles from Almirah large steel 1/2S, 1/2S and S&F new CP steel handle of exisiting size to Almirah medium steel all as shown on drawing complete all as specified and directed. |
| 121 | Lock : Removing of old unserviceable lock from Almirah large steel 1/2S, 1/2S and S&F new lock of approved make, 06 lever with two keys to Almirah medium steel all as shown on drawing complete all as specified and directed |
| 122 | Locking Device : M&L for locking device and lock bar as required and as directed by Engr-in-Charge to Almirah large steel 1/2S, 1/2S including making adjustment of door shutter & applying one coat of synthetic enamel paint over a coat of red-oxide primer after preparation of surfaces complete with spray machine all as shown on drawing complete all as specified and directed |
| 123 | Legs : Removing of old unserviceable leg from Almirah large steel 1/2S, 1/2S and S&F new leg made out of 1mm thick MS black sheet (PBI) of existing size, shape and welding at appropriate points complete all as specified and directed by Enger-in-Charge. |
| 124 | All as per Srl item No. 20.04 here-in -before but bottom sheet of Almirah large steel 1/2H,1/2S. |
| 125 | All as per Srl item No. 20.04 here-in -before but shelf of Almirah large steel 1/2H,1/2S. |
| 126 | Removing of old unserviceable butt hinges of Almirah large steel 1/2H,1/2S and S&F new butt hinges 75mm long and adjusting door by revitting/ welding complete all as shown on drawing complete all as specified and directed. |
| 127 | Replacement of unserviceable conduit pipe with new CP steel conduit pipe of siutable size of 20mm dia having wall thickness 1.25mm to Almirah large steel 1/2H,1/2S complete all as specified and directed |
| 128 | Replacement of unserviceable socket with new Stainless steel socket/ brackets suitable for 20mm dia conduit pipes to Almirah large steel 1/2H,1/2S complete all as specified and directed. |
| 129 | M&L for refixing of loose shelves with mild steel revitting/ spot welding complete all as specified and directed. |
| 130 | S&F 02 Nos of nylon bufferrs at the bottom of each legs with MS bolt complete all as specified and directed. |
| 131 | ALMIRAH LARGE STEEL (FD -1031) |
| 132 | CP Handle : Removing of old unserviceable handles from Almirah large steel and S&F new CP steel handle of exisiting size to Almirah large steel all as shown on drawing complete all as specified and directed |
| 133 | Lock : Removing of old unserviceable lock from Almirah large steel and S&F new lock of approved make, 06 lever with two keys to Almirah large steel all as shown on drawing complete all as specified and directed. |
| 134 | Locking Device : M&L for locking device and lock bar as required and as directed by Engr-in-Charge to Almirah large steel including making adjustment of door shutter & applying one coat of synthetic enamel paint over a coat of red-oxide primer after preparation of surfaces complete with spray machine all as shown on drawing complete all as specified and directed. |
| 135 | Legs : Removing of old unserviceable leg from Almirah large steel and S&F new leg made out of 1mm thick MS black sheet (PBI) of existing size, shape and welding at appropriate points complete all as specified and directed. |
| 136 | All as per Srl item No. 21.04 here-in-before but bottom sheet of Almirah large steel. |
| 137 | All as per Srl item No. 21.04 here-in-before but shelf of Almirah large steel. |
| 138 | Removing of old unserviceable butt hinges of Almirah large steel and S&F new butt hinges 75mm long and adjusting door by revitting/ welding complete all as shown on drawing complete all as specified and directed |
| 139 | M&L for refixing of loose shelves with mild steel revitting/ spot welding complete all as specified and directed |
| 140 | BED HARD STEEL FD/E6/MAP/08 (R) |
| 141 | Removing of old and unserviceable Plytop from Bed Hard and S&F of new 12mm thick plytop of suitable size, ISI marked, BWR plywood of unpolished edging of approved quality all as shown on drawing complete all as specified and directed. |
| 142 | Removing of old unserviceable head board from Bed Hard and S&F new head board made of 18mm thick Prelaminated Particle board with colour/ shade approved by GE/ Engr-in-Chrge. All as per size and design shown on drawing complete all as specified and directed |
| 143 | All as per Srl item No. 22.02 here-in-before but foot board of Bed hard. |
| 144 | S&F in replacement hard rubber shoes at the bottom of leg of Bed hard steel all as shown on drg complete all as specified and directed |
| 145 | Welding to broken joints of bed hard complete all as specified and directed |
| 146 | BED HARD STEEL JCOs CWE/M/TP/06/07 |
| 147 | Removing of old and unserviceable Plytop from Bed Hard and S&F of new 12mm thick plytop of suitable size, ISI marked, BWR plywood of unpolished edging of approved quality all as shown on drawing complete all as specified and directed. |
| 148 | Removing of old unserviceable head board from Bed Hard and S&F new head board made of 18mm thick Prelaminated Particle board with colour/ shade approved by GE/ Engr-in-Chrge. All as per size and design shown on drawing complete all as specified and directed |
| 149 | S&F in replacement hard rubber shoes at the bottom of leg of Bed hard steel all as shown on drg complete all as specified and directed |
| 150 | Welding to broken joints of bed hard complete all as specified and directed |
| 151 | CHAIR VERANDAH FD-359 & 256 |
| 152 | Cutting and removing of old cane from Chair verandah, preparation of surfaces by application of paint remover and grinding machine and applying two coats of synthetic enamel white paint after application of one coat of red oxide steel primer and re-canning with cane plastic 04mm wide of approved quality in Godrej Pattern complete all as shown on drawing complete all as specified and directed by Engr-in-Charge. |
| 153 | Welding to broken joints of Chair varandah complete all as specified and directed |
| 154 | S&F in replacement PVC shoes to Chair Verandah all as shown on drg complete all as specified and directed |
| 155 | CHAIR VERANDAH MAP FD/MAP-II/06, FD/MAP-II/15 |
| 156 | Cutting and removing of old/ unsv PVC Sheet from Chair verandah, preparation of surfaces by application of paint remover and grinding machine and applying two coats of synthetic enamel white paint after application of one coat of red oxide steel primer and re-canning with cane plastic 04mm wide of approved quality in Godrej Pattern complete all as shown on drawing complete all as specified and directed by Engr-in-Charge. |
| 157 | Welding to broken joints of Chair varandah complete all as specified and directed |
| 158 | S&F in replacement PVC shoes to Chair Verandah all as shown on drg complete all as specified and directed |
| 159 | CHAIR WRITING STEEL/ CHAIR VISITOR STEEL/ CHAIR CUSHION WITH HANDLE (Drg No. TP/CWE SPL DRAWING/MAP series/eqvt drgs) |
| 160 | Replacement of old unserviceable/ broken arm rest with new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant of Chair briefing static base complete all as specified and directed by Engineer-in-Charge. |
| 161 | S&F in replacement of old unservicable seat ply with new seat of 12mm thick plywood commercial quality (ISI marked). Seat shall be fixed on frame with screw and including all minor repairs with welding to steel frame etc complete all as specified and as directed by Engineer-in-Charge. |
| 162 | S&F in replacement of old unservicable foam cushion of seat with new 75mm thick PU foam cushion including pasting to hot pressed plywood 12mm complete all as specified and as directed. |
| 163 | S&F in replacement of old unservicable tapestry cloth of seat with new tapestry cloth of approved quality & color with PVC lipping all around complete all as specified and as directed. (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE). |
| 164 | Replacement of unserviceable hessian cloth of seat with new cloth complete all as specified and directed by the Engineer-in-Charge. |
| 165 | S&F in replacement of old unservicable back ply with new seat of 12mm thick plywood commercial quality (ISI marked) back shall be fixed on frame with screw and including all minor repairs with welding to steel frame etc complete all as specified and as directed by Engineer-in-Charge. |
| 166 | S&F in replacement of old unservicable foam cushion of seat with 40mm thick PU foam cushion including pasting to hot pressed plywood 6mm complete all as specified and as directed. |
| 167 | S&F in replacement of old unservicable tapestry cloth of back with new tapestry cloth of approved quality & color with PVC lipping all around complete all as specified and as directed. (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE). |
| 168 | Replacement of unserviceable cloth of back side of chair back with new cloth complete all as specified and directed by the Engineer-in-Charge. |
| 169 | Removing of old/ unserviceable tapestry cloth from seat and back of existing Chair Writing and S&F new tapestry cloth to seat and back of Chair Writing complete all as specified and as directed by Engineer-in-Charge.(Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE). |
| 170 | Welding to broken joints of Chair writng complete all as specified and directed |
| 171 | S&F in replacement hard PVC shoes to Chair writng all as shown on drg complete all as specified and directed |
| 172 | CHAIR COMPUTER/ Chair revolving with arms (Drg No FD/E6/MAP/01, TP & similar drg) |
| 173 | Replacement of old unserviceable/ broken arm rest with new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant of Chair briefing static base complete all as specified and directed by Engineer-in-Charge. |
| 174 | S&F in replacement of old unservicable seat ply with new seat of 12mm thick plywood commercial quality (ISI marked). Seat shall be fixed on frame with screw and including all minor repairs with welding to steel frame etc complete all as specified and as directed by Engineer-in-Charge. |
| 175 | S&F in replacement of old unservicable foam cushion of seat with new 75mm thick PU foam cushion including pasting to hot pressed plywood 12mm complete all as specified and as directed. |
| 176 | S&F in replacement of old unservicable tapestry cloth of seat with new tapestry cloth of approved quality & color with PVC lipping all around complete all as specified and as directed. (Note:- The tapestry cloth of rate ranging between Rs. 175/- per meter as per sample approved by GE). |
| 177 | Replacement of unserviceable hessian cloth of seat with new cloth complete all as specified and directed by the Engineer-in-Charge. |
| 178 | S&F in replacement of old unservicable back ply with new seat of 12mm thick plywood commercial quality (ISI marked) back shall be fixed on frame with screw and including all minor repairs with welding to steel frame etc complete all as specified and as directed by Engineer-in-Charge. |
| 179 | S&F in replacement of old unservicable foam cushion of seat with 40mm thick PU foam cushion including pasting to hot pressed plywood 6mm complete all as specified and as directed. |
| 180 | S&F in replacement of old unservicable tapestry cloth of back with new tapestry cloth of approved quality & color with PVC lipping all around complete all as specified and as directed. (Note:- The tapestry cloth of rate ranging between Rs. 175/- per meter as per sample approved by GE). |
| 181 | Replacement of unserviceable cloth of back side of chair back with new cloth complete all as specified and directed by the Engineer-in-Charge. |
| 182 | Replacement of unserviceable hydraulic system of Chair for the adjustment of height complete all as specified and directed by the Engineer-in-Charge. |
| 183 | Replacement of old, unserviceable/ broken wheel base of Chair complete all as specified and directed by the Engineer-in-Charge. |
| 184 | Removing old/ unservicavle twin castor wheel from chair and S & F new twin wheel castors as per shape and size complete all as specified and directed. |
| 185 | Removing unserviceable synchro tilting mechanism & replacing with new synchro tilting mechanism, complete all as specified and directed by the Engineer-in-Charge. |
| 186 | CHARPOY WITH HARD TOP : FD/MAP-II/01 |
| 187 | Removing of old and unserviceable Plytop from Charpoy with hard top and S&F of new 12mm thick plywood of suitable size, ISI marked, BWR phenol bonded plywood with unpolished edging of approved quality all as shown on drawing and as directed. |
| 188 | Welding to broken joints of Charpoy with hard top complete all as specified and directed |
| 189 | S&F in replacement hard rubber shoes at the bottom of Charpoy with hard top all as shown on drg complete all as specified and directed |
| 190 | LOCKER BED SIDE STEEL :- (FD-257 & Eqvt drawing) |
| 191 | Replacement of old unserviceable hasp and staple with new 100mm long MS chromium plated hasp and staple all as shown drg complete all as specified and directed |
| 192 | Replacement of old unserviceable bow handle with new 100mm long CP steel bow handle all as shown on drg complete all as specified and directed |
| 193 | Replacement of unserviceable conduit pipe with new CP steel conduit pipe of siutable size of 20mm dia having wall thickness 1.25mm to locker steel complete all as specified and directed |
| 194 | Replacement of unserviceable socket with new aluminium socket/ brackets suitable for MS 20mm dia conduit pipes complete all as specified and directed. |
| 195 | Removing of old unserviceable foot rest from locker bed side steel and supply and fixing new foot rest made out of 1mm thick MS black sheet (PBI) of existing size, shape and welding at appropriate points and applying one coat of synthetic enamel olive green paint with spray machine over a coat of primer after preparation of surfaces complete all as specified and directed |
| 196 | All as per Srl item No. 29.05 above here-in -before but bottom sheet of locker bed side steel. |
| 197 | Removing of old unserviceable MS hinges of locker bed side steel and S&F new MS hinges 65mm long with gas welding/ revitting complete all as shown on drawing complete all as specified and directed |
| 198 | M&L for refixing of loose shelves with mild steel revitting/ spot welding complete all as specified and directed |
| 199 | Table Computer FD/E6/MAP/03 & TP Drg Etc |
| 200 | Removing of old unserviceable top from Table Computer and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make- Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed |
| 201 | Removing of old unserviceable bottom from Table Computer and supply and fixing the new bottom of same size made out of 18mm thick exterior grade pre-laminated particle board with allround PVC edging all as shown on drawing and as directed. |
| 202 | All as per srl item No. 30.02 here-in-before but vertical board on side of Table computer. |
| 203 | All as per srl item No. 30.02 here-in-before but keyboard tray of Table computer. |
| 204 | All as per srl item No. 30.02 here-in-before but drawer of Table computer. |
| 205 | All as per srl item No. 30.02 here-in-before but pull out mouse tray of Table computer. |
| 206 | Removing of old unserviceable telescopic channel of key board and supply and fixing new stainless steel telscopic channel to Table computer complete all as specified and directed by Engineer-in-Charge. |
| 207 | S&F new Nylon buffers to Table Computer all as shown on drawing complete all as specified and directed |
| 208 | S&F new knobs to Table Computer all as shown on drawing complete all as specified and directed |
| 209 | TABLE BEDSIDE - (FD/E6/MAP/15(R) and relevent drgs ) |
| 210 | M&L for replacement of existing unserviceable Top of Table bedside with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading all round table top, complete all as directed by Engineer in charge. |
| 211 | M&L for replacement of back side of Table bedside made out of 06mm thick BWR plywood commercial best quality, complete all as directed by Engineer in charge. |
| 212 | M&L for replacement of upper drawer of Table bedside made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & 06mm thick BWR plywood commercial as in bottom of drawer, providing one CP Handle of best quality complete all as directed by Engr-in-Chage. |
| 213 | M&L for replacement of bottom drawer of Table bedside wtih new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & 06mm thick BWR plywood commercial as in bottom of drawer, providing one CP Handle of best quality complete all as directed by Engr-in-Chage. |
| 214 | M&L for replacement of PVC hard rubber shoes fixed at bottom four Nos. shoes of each leg of TABLE shoe, complete all as directed by Engineer in charge. |
| 215 | M&L for replacement of existing unserviceable sides of Table bedside with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading whereever requred, complete all as directed by Engineer in charge. |
| 216 | S& F in repairs telescopic chennel of 10'' size shall be provided for smooth functioning of drawers of table bedside as per drg and as directed by Engr-in-Charge. |
| 217 | PAINTING :- M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint (hammer tone/ dual tone) make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the following steel furniture items (internally & externally complete) :- |
| 218 | Almirah large steel - FD-1031 |
| 219 | Almirah large steel 1/2H,1/2S - FD/E6/MAP/18 |
| 220 | Almirah medium steel - FD-1032 |
| 221 | Bed hard steel - (MAP) FD/E6/MAP/08 (R) |
| 222 | Bed Hard Steel JCOs - CWE/M/TP/06/07 |
| 223 | Book case steel - [FD-1028] |
| 224 | Chair Writing - (MAP) FD/E6/MAP/12 & TP |
| 225 | Charpoy IP Hard Top - (MAP) FD/MAP-II/01 |
| 226 | Desk Steel - [Drawing No.- FD-1021] |
| 227 | Dual desk with Seat (Desk size-1060mm x 450mm x 650mm & Seat size - 1060mm x 300mm x 335mm) [Drawing No.- TP] |
| 228 | Dual desk with Seat (Desk size-1060mm x 450mm x 650mm & Seat size - 1060mm x 300mm x 415mm) [Drawing No.- TP] |
| 229 | Locker Bedside steel - FD-257 |
| 230 | LOCKER UNIT OF 10 LOCKERS STEEL - CWE/M/F/23-95 |
| 231 | Side Rack Steel 3/4 Space - [Drg No. FD-1023 & Similar drawings] |
| 232 | Tabel 3' x 2' with/ without drawer steel - FD-1007, 1008 |
| 233 | Table 1800 x 1050MM - [Drg No.CWE/M/I/27/95 or similar drawings] |
| 234 | TABLE 3' x 3' STEEL - [Drg No. FD-1009/TP/Similar] |
| 235 | Table 5' x 2'-10'' - [Drawing No.- TP/Similar] |
| 236 | Table 6' x 3'-6\\" - [Drawing No.- TP/Similar] |
| 237 | Table Bedside - (MAP) FD/E6/MAP/15 (R) |
| 238 | Table computer - FD/E6/MAP/03 |
| 239 | TABLE O/CLERK STEEL & TABLE WRITING STEEL S/TOP [Drg No. FD-1004/TP/Similar] |
| 240 | TABLE O/OFFICER STEEL [Drg No. FD-1003/Similar] |
| 241 | Table PC Work Station size 900mm x 600mm x 750mm [Drg No. CWE/M/1/7/94 /TP/Similar] |
| 242 | Table Steel 1500 x 750MM [Drg No. CWE/M/F/26/95 or similar drawings] |
| 243 | CHAIR DINING CUSHION LONG BACK - (FD-357) |
| 244 | M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, specified and as directed by the Engineer-in-Charge. |
| 245 | All as per Srl item No. 33.01 above but front leg |
| 246 | All as per Srl item No. 33.01 above but side rail |
| 247 | All as per Srl item No. 33.01 above front/ back rail |
| 248 | All as per Srl item No. 33.01 above but stiffner |
| 249 | M&L for removal of unserviceable backrest of dining chair (FD-357), supply and fixing of new foam cushion (ISI Marked IS-1741) for backrest, covered with superior quality rexine/cloth, fixed on removable 6mm BWR grade commercial plywood as per drawing. Includes repair/replacement of decorative wooden beading and design pattern on all three sides of the backrest, all as specified and approved by the Engineer-in-Charge. |
| 250 | M&L for removal of unsv seat of chair, S & F of new foam cushion 4\\" thick (ISI Marked IS-1741) 40 density for seat and covered with superior quality rexine/ cloth, fixed with removable 12mm BWR grade commercial ply wood as specified in drg and as directed and approved by Engr in charge. |
| 251 | BED PLY TOP - FD-246 & 247 |
| 252 | Removing of old unserviseable plywood top from Bed ply top and S&F new top of same size of 12mm thick ply wood (ISI marked), BWR grade of appropriate size with screws complete all as shown on drawing and as directed. |
| 253 | Removal of old unserviceable long rail from bed and S&F new long rail with rounded edges of size 1980mm x 90mm x 35mm of hard wood teak and fixing the same as shown on drawing including one coat of french polish after preparing the surface by sand paper complete all as specified and as directed. |
| 254 | All as per Srl item No. 34.02 here-in-before but short rail of size 60mm x 60mm of suitable length. |
| 255 | All as per Srl item No. 34.02 here-in-before but stiffener of size 60mm x 60mm of suitable length. |
| 256 | Removing of old unserviceable ply wood from the existing head rest of Bed ply top and S & F new OSTF plywood 04mm thick ISI marked, BWR grade to both sides of head rest including 04mm thick teak wood beading all around as per shape and size shown in drawing and fixed with nails including french polishing to ply & beading complete all as specified and directed. |
| 257 | All as per Srl item No. 34.05 here-in-before but foot rest. |
| 258 | Removing of old unserviceable head rest from bed ply top and S&F new head rest made out of Ist class hard wood including provision of 04mm thick one side teak faced plywood and teak wood beading 04mm thick as per shape and size shown in drawing and fixed with nails duly french polished with both side MNF arrangement and fixing the same all as shown on drawing. |
| 259 | All as per Srl item No. 34.07 here-in-before but foot rest. |
| 260 | CHAIR DINING FD-203/228/279/1105 |
| 261 | M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, specified and as directed by the Engineer-in-Charge. |
| 262 | All as per Srl item No. 35.01 above but front leg |
| 263 | All as per Srl item No. 35.01 above but side rail |
| 264 | All as per Srl item No. 35.01 above front/ back rail |
| 265 | All as per Srl item No. 35.01 above but stiffner |
| 266 | All as per Srl item No. 35.01 above but back strip support |
| 267 | S & F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg complete all as specified and directed by Engr-in-charge. |
| 268 | Table Card [FD-288 & FD-352] |
| 269 | M & L for replacement of existing broken/ damaged long rail of Table card with new one well seasoned 1st class teak wood as specified in shape & size as per existing complete all as directed by Engineer in charge. |
| 270 | M & L for replacement of existing broken/ damaged short rail of Table card with new one well seasoned 1st class teak wood as specified in shape & size as per existing complete all as directed by Engineer in charge. |
| 271 | M & L for replacement of existing broken/ damaged leg of Table card with new one well seasoned 1st class teak wood as specified in shape & size as per existing complete all as directed by Engineer in charge. |
| 272 | M & L for replacement of existing broken/ damaged stiffeners long of Table card with new one well seasoned 1st class teak wood as specified in shape & size as per existing complete all as directed by Engineer in charge. |
| 273 | M & L for replacement of existing broken/ damaged stiffeners short of Table card with new one well seasoned 1st class teak wood as specified in shape & size as per existing complete all as directed by Engineer in charge. |
| 274 | M&L for replacement of existing unserviceable Top of Table card with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white complete all as directed by Engineer in charge. |
| 275 | M&L for replacement of existing old green baize cloth cover on top with new one made out of best quality fabric including providing 04mm thick teak wood beading all round table top complete all as directed by Engineer in charge. |
| 276 | M&L for replacement of PVC hard rubber shoes fixed at bottom four Nos. shoes of each leg of Table card with GI screw, complete all as directed by Engineer in charge. |
| 277 | M & L for replacement of drawer of Table card made out of 12mm thick BWR ply wood frame, bottom shall be of 06mm thick ply wood, front of 18mm thick prrlaminated board with & including providing one knob of 25mm dia PVC of best quality complete all as directed by Engineer-in-charge |
| 278 | CHAIR EASY WITH CUSHION [FD-358] |
| 279 | M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, complete all as specified and directed by the Engineer-in-Charge. |
| 280 | All as per item No. 37.01 above but front leg |
| 281 | All as per item No. 37.01 above but side rail of seat frame |
| 282 | All as per item No. 37.01 above but front or back rail of seat frame |
| 283 | All as per item No. 37.01 above but side rail of back frame |
| 284 | All as per item No. 37.01 above but top or bottom rail of back frame |
| 285 | All as per item No. 37.01 above but replacement of arm rest |
| 286 | M&L for removal of unsv seat of chair, S & F of new foam cushion 75mm thick (ISI Marked IS-1741) 40 density for seat fixed with removable 12mm BWR grade commercial ply wood as specified in drg and as directed and approved by Engr in charge. |
| 287 | Removal of rexine cloth from existing seat of chair and providing new cover of approved shade duly stitched and fixing all as per drawing and as directed. Complete all as specified and directed by Engr-in-charge (Sample of rexine cloth shall be approved by the GE). |
| 288 | M&L for removal of unsv back of chair, S & F of new foam cushion 50mm thick (ISI Marked IS-1741) 40 density for seat fixed with removable 12mm BWR grade commercial ply wood as specified in drg and as directed and approved by Engr in charge. |
| 289 | Removal of rexine cloth from existing back of chair and providing new cover of approved shade duly stitched and fixing all as per drawing and as directed. Complete all as specified and directed by Engr-in-charge (Sample of rexine cloth shall be approved by the GE). |
| 290 | S & F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg complete all as specified and directed by Engr-in-charge. |
| 291 | CHAIR DINING ORs (MAP) FD/MAP-II/04 |
| 292 | M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, specified and as directed by the Engineer-in-Charge. |
| 293 | All as per item No. 38.01 above but front leg |
| 294 | All as per item No. 38.01 above but side rail |
| 295 | All as per item No. 38.01 above front/ back rail |
| 296 | All as per item No. 38.01 above but stiffner |
| 297 | All as per item No. 38.01 above but back strip |
| 298 | S & F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg complete all as specified and directed by Engr-in-charge. |
| 299 | Removing of old unsv/ troneout PVC seats from chairs and S&F new PVC seat complete all as specified and directed by the Engineer-in-Charge. |
| 300 | CHAIR WRITING FD-20 (M)/202/250/280 |
| 301 | M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, complete all as specified and directed by the Engineer-in-Charge. |
| 302 | All as per Srl item No. 39.01 above but front leg |
| 303 | All as per Srl item No. 39.01 above but side rail |
| 304 | All as per Srl item No. 39.01 above but front or back rail |
| 305 | All as per Srl item No. 39.01 above but back strip |
| 306 | All as per Srl item No. 39.01 above but arm rest |
| 307 | All as per Srl item No. 39.01 above but stiffner |
| 308 | S & F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg complete all as specified and directed by Engr-in-charge. |
| 309 | CHAIR EASY FD-229 |
| 310 | M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, complete all as specified and directed by the Engineer-in-Charge. |
| 311 | All as per Srl item No. 40.01 above but front leg |
| 312 | All as per Srl item No. 40.01 above but side rail of seat frame |
| 313 | All as per Srl item No. 40.01 above but front or back rail of seat frame |
| 314 | All as per Srl item No. 40.01 above but side rail of back frame |
| 315 | All as per Srl item No. 40.01 above but top or bottom rail of back frame |
| 316 | All as per Srl item No. 40.01 above but replacement of arm rest |
| 317 | S & F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg complete all as specified and directed by Engr-in-charge. |
| 318 | PEG TABLE FD-277 |
| 319 | Removing of old unserviceable top from peg table and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make- Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, complete all as specified and directed |
| 320 | Replacement of old unserviceable leg from existing peg table and S&F the same size new leg made out of Ist class hard wood teak to Peg table duly french polished all as shown on drawing complete all as specified and directed by Engineer-in-Charge. |
| 321 | All as per Srl item No. 41.02 here-in-before but long top rail. |
| 322 | All as per Srl item No. 41.02 here-in-before but short/ bottom rail. |
| 323 | All as per Srl item No. 41.02 here-in-before but stiffener of Peg table. |
| 324 | SOFA SET 04 SEATER WITH CUSHION FD-281 |
| 325 | Removing of old unserviceable arm rest from exiting sofa set 04 seater and supplying and fixing new 1st class hard wood teak arm rest to sofa set 04 seater complete as shown on drawing. |
| 326 | All as per Srl item No. 41.07 here-in-before but front/ back rail of sofa set 04 seater. |
| 327 | All as per Srl item No. 41.07 here-in-before but side rail of sofa set 04 seater. |
| 328 | All as per Srl item No. 41.07 here-in-before but legs of sofa set 04 seater. |
| 329 | All as per Srl item No. 41.07 here-in-before but wooden battens of sofa set 04 seater. |
| 330 | S&F foam cushion of size 22\\" x 21\\", 100mm thick 40 density complete all as specified and directed. |
| 331 | Removal of tapestry cloth from existing foam cushion of seat/ back of Sofa set 04 seater and providing new cover of foam cushion of approved shade of Indian make of rate not less than Rs. 450/- per meter duly stitched and fixing the same all as per drawing and as directed. The cover shall be removable duly provided with ZIP of make YKK, Riri Glossy, lampo complete all as specified and directed by Engr-in-charge (Sample of tapestry cloth shall be approved by the GE). |
| 332 | SOFA SET 05 SEATER WITH CUSHION FD-281/FD/MAP-II/02 |
| 333 | Removing of old unserviceable arm rest from existing sofa set 05 seater and supplying and fixing new 1st class hard wood teak arm rest to sofa set 05 seater all as shown on drawing. |
| 334 | All as per Srl item No. 42.01 here-in-before but front/ back rail of sofa three seated. |
| 335 | All as per Srl item No. 42.01 here-in-before but front/ back rail of sofa single seated. |
| 336 | All as per Srl item No. 42.01 here-in-before but side rail of sofa set 05 seater. |
| 337 | All as per Srl item No. 42.01 here-in-before but legs of sofa set 05 seater. |
| 338 | All as per Srl item No. 42.01 here-in-before but wooden battens of sofa set 05 seater of Drg No FD-281 |
| 339 | All as per Srl item No. 42.01 here-in-before but Seat/ Back of Sofa three seated of Drg No FD/MAP-II/02 made out of plywood 12mm |
| 340 | All as per Srl item No. 42.01 here-in-before but Seat/ Back of Sofa single seated of Drg No FD/MAP-II/02 made out of plywood 12mm |
| 341 | S&F foam cushion of size 22\\" x 21\\", 100mm thick 40 density duly complete all as specified and directed. |
| 342 | Removal of tapestry cloth from existing foam cushion of seat/ back of Sofa set 05 seater and providing new cover of foam cushion of approved shade of Indian make of rate not less than Rs.350/- per meter duly stitched and fixing the same all as per drawing and as directed. The cover shall be removable duly provided with ZIP of make YKK, Riri Glossy, lampo complete all as specified and directed by Engr-in-charge (Sample of tapestry cloth shall be approved by the GE). |
| 343 | SIDE BOARD FD-241/372/1112 |
| 344 | Removing of old unserviceable top from Side board and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board as per size/ colour/ shade existing complete all as specified and directed by Engr-in-Charge / GE. |
| 345 | All as per Srl item No. 43.01 here-in-before but door of side board including aluminium anodized knob and continues piano type hinges. |
| 346 | All as per Srl item No. 43.01 here-in-before but side of side board. |
| 347 | Removing of old unserviceable back ply of side board and supply and fixing the new back ply of same size made out of 06mm thick commercial plywood (ISI marked) with colour/ shade as approved by GE/ Engr-in-Charge and as directed. |
| 348 | Replacement of unserviceable drawer with new drawer of same size and shape. Front of the drawer shall be made out of 18mm thick exterior grade pre-laminated particle board with colour/ shade as approved by GE/Engr-in-Charge including CP steel handle. Sides,base and back of drawer made out of 12mm thick commercial ply wood (ISI marked) and fixing all as shown in drawing including one coat of french polish complete all as specified and directed |
| 349 | Removing of old/ unserviceable handle from the side board and supply and fixing new 100mm long CP steel handle with steel screws as per sample, shape and size all as per drawing complete all as specified and directed |
| 350 | Removing of old unserviceable legs with frame from Side board and supply and fixing new Ist class hard wood teak legs alongwith leg frame of side board all as shown on drawing complete all as specified and directed |
| 351 | TABLE DINING (JCOs/ORs) 1200 X 900MM FD-273, FD/MAP-II/03 |
| 352 | Removing of old unserviceable top from table and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make- Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed for Table dining 4 persons |
| 353 | All as per Srl item No. 44.01 above but S&F new leg made of 1st class hard wood |
| 354 | All as per Srl item No. 44.01 above but long rail |
| 355 | All as per Srl item No. 44.01 above but short rail |
| 356 | All as per Srl item No. 44.01 above but support stiffner |
| 357 | S& F new bracket of size 100 x 100 x 30mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete all as specified and directed by Engr-in-charge |
| 358 | TEAPOY FD-34/232/278/382 |
| 359 | Removing of old unserviceable top from Teapoy and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make- Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed |
| 360 | All as per Srl item No. 45.01 above but leg made of 1st class hard wood |
| 361 | All as per Srl item No. 45.01 above but long rail |
| 362 | All as per Srl item No. 45.01 above but short rail |
| 363 | All as per Srl item No. 45.01 above but stiffner |
| 364 | S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg complete all as specified and directed by Engr-in-charge. |
| 365 | TABLE DRESSING GENTS WITH MIRROR MAP |
| 366 | Removing the existing unserviceable sides and supply & fix new left side made of 18mm MDF board bonded with phenol formaldehyde resin, exterior grade-II both side teak colour as shown on drgs and directed by Engr-in-charge. |
| 367 | Removing the existing unserviceable hinges and supply & fix new Piano type hinges of stainless steel all as shwn on drgs and as directed by Engr-in-charge. |
| 368 | Removing the unserviceable mirror and supply & fix new mirror of 5mm thick all as specified and shown on drgs. |
| 369 | Removing the existing unserviceable glass shelf and supply & fix new glass shelf of 5.0mm thick all as shwn on drgs and as directed. |
| 370 | Removing the existing unserviceable/ broken complete magnetic catcher set and supply & fix new complete magnetic catcher set all as shown & specified on drgs and as directed by Engr-in-charge. |
| 371 | Removing the existing unserviceable back side of mirror and S & F new back side made of 6mm commercial plywood all as shwn on drgs and as directed. |
| 372 | Removing the existing unserviceable back side of cabinet and S & F new back side made of 12mm commercial plywood all as shwn on drgs and as directed.Note : Unit rate quoted for all the above items shall be deemed to include for connected minor repairs wherever necessary and polishing of table dressing gents with mirror. |
| 373 | TABLE 900 x 600mm with/ without drawer - FD-223/224/283/284 |
| 374 | Removing of old unserviceable top from Table and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make- Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, complete all as specified and directed |
| 375 | All as per Srl item No. 47.01 above but leg made out of 1st class hard wood |
| 376 | All as per Srl item No. 47.01 above but replacement of long rail |
| 377 | All as per Srl item No. 47.01 above but replacement of short rail |
| 378 | All as per Srl item No. 47.01 above but replacement of drawer with fittings |
| 379 | All as per Srl item No. 47.01 above but replacement of bottom centre stiffener |
| 380 | All as per Srl item No. 47.01 above but replacement of bottom side stiffner |
| 381 | S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg complete all as specified and directed by Engr-in-charge. |
| 382 | TABLE DRESSING LADIES (FD/MAP-II/07) |
| 383 | M&L for replacement of broken/ damaged mirror including frame of Table dressing ladies with new one mirror of 05mm thick of size as shown on drg of approved quality fixed to wooden frame, complete all as directed by Engineer in charge. |
| 384 | M&L for replacement of back side of mirror of Table dressing ladies made out of 06mm thick BWR plywood commercial for frame of best quality, complete all as directed by Engineer in charge. |
| 385 | M&L for for replacement of hard wood support member of size 45 x 35 x 1520mm for mounting mirror of Table dressing ladies made out of teak wood of best quality, complete all as directed by Engineer in charge. |
| 386 | M&L for replacement of existing unserviceable Top of Table dressing ladies with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading all round table top, complete all as directed by Engineer in charge. |
| 387 | M&L for replacement of drawer of Table dressing ladies made out of out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & 06mm thick BWR plywood commercial as in bottom of drawer, providing one CP Handle of best quality complete all as directed by Engr-in-Chage. |
| 388 | M&L for replacement of existing unserviceable shutter of Table dressing ladies with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading all round, providing one CP Handle of best quality complete all as directed by Engr-in-Chage. |
| 389 | M&L for replacement of PVC hard rubber shoes fixed at bottom four Nos. shoes of each leg of TABLE DRESSING LADIES with GI screw, complete all as directed by Engineer in charge. |
| 390 | M&L for replacement of existing unserviceable sides of Table dressing ladies with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading whereever requred, complete all as directed by Engineer in charge. |
| 391 | M&L for replacement of existing unserviceable back of the box of Table dressing ladies with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading whereever requred, complete all as directed by Engineer in charge. |
| 392 | M&L for replacement of existing unserviceable bottom of Table dressing ladies with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading whereever requred, complete all as directed by Engineer in charge. |
| 393 | M&L for replacement of existing unserviceable magnetic catcher with new one of best quality complete all as directed by Engr-in-Chage. |
| 394 | TABLE DRESSING GENTS WITH MIRROR FD-230 |
| 395 | Removing of old unserviceable looking mirror from table dressing gents with mirror and supplying and fixing new looking mirror of size 750 x 450 x 5mm thick of modi-gurard duly fixed in and including frame of teak wood and polishing complete in all respect to fix on wall all as shown on drawing complete all as specified and directed. |
| 396 | Removing old broken/ unserviceable sunmica from the top of table dressing gents and S&F new 1.5mm thick sunmica of best quality fixed with fevicoal adhesive as per shape and size shown in drawing complete all as specified and directed. |
| 397 | Removing old broken/ unserviceable sunmica from the drawer of table dressing gents and S&F new 1.5mm thick sunmica of best quality fixed with fevicoal adhesive as per shape and size shown in drawing complete all as specified and directed. |
| 398 | Removing old broken/ unserviceable knob from table dressing gents and S&F new 40mm size CP brass knob as per sample, shape and size shown in drawing complete all as specified and directed. |
| 399 | TABLE CENTRE FD-274 |
| 400 | Removing of old unserviceable top from Table Centre and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make- Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed |
| 401 | Replacement of old unserviceable leg from existing table centre and S&F the same size new leg made out of Ist class hard wood teak to table centre duly french polished all as shown on drawing complete all as specified and directed by Engineer-in-Charge. |
| 402 | All as per Srl item No. 50.01 here-in-before but long rail. |
| 403 | All as per Srl item No. 50.01 here-in-before but short rail. |
| 404 | All as per Srl item No. 50.01 here-in-before but stiffener of table centre. |
| 405 | Chair Dining Offrs (MAP) FD/E6/MAP/06 |
| 406 | M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, specified and as directed by the Engineer-in-Charge. |
| 407 | All as per Srl item No. 51.01 above but front leg |
| 408 | All as per Srl item No. 51.01 above but side rail |
| 409 | All as per Srl item No. 51.01 above front/ back rail |
| 410 | All as per Srl item No. 51.01 above but stiffner |
| 411 | All as per Srl item No. 51.01 above but back strip |
| 412 | M&L for removal of unsv seat of chair, S & F of new foam cushion 4\\" thick (ISI Marked IS-1741) 40 density for seat and covered with superior quality rexine/ cloth, fixed with removable 12mm BWR grade commercial ply wood as specified in drg and as directed and approved by Engr in charge. |
| 413 | TABLE WRITING:- FD-33, FD-275 |
| 414 | Removing of old unserviceable top from Table Writing and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make- Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed |
| 415 | Replacement of Legs of to be made out of Ist class Teak wood well seasoned and fixed as per drg complete all as specified and directed |
| 416 | Replacement of Stiffener, to be made out of Ist class Teak wood well seasoned complete all as specified and directed |
| 417 | Replacement of side/ Door Shutters to be made out of 18mm thick exterior grade pre-laminated particle board covered with all round 4mm thick teak wood beading and duly fixed with knobs and piano type hinges 4mm thick with 4 lever 40mm brass lock complete all as specified and directed |
| 418 | Replacement of back of table writing which shall be made out of 06mm thick commercial ply wood ISI marked complete all as specified and directed |
| 419 | Replacement of Drawers of table writing to be made out of 18mm thick exterior grade pre-laminated particle board ISI marked and 4mm thick beading teak wood to be fixed and provided one knob complete all as specified and directed |
| 420 | Replacement of Hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 20mm long screw wood steel ISI marked complete all as specified and directed. |
| 421 | Recanning of various types of Wooden Chairs |
| 422 | Removing of broken/ damaged plastic cane from Chair dining (Drg No FD-203/ 228/ 279/ 1105) with new white plastic cane 02mm width best quality & beading half round with 03mm width white plastic cane joints/ knots of cane strif shall be under the seat frame complete all as directed by Engineer-in-charge. |
| 423 | Removing of broken/ damaged plastic cane from Chair Easy (Drg No FD-229) with new white plastic cane 02mm width best quality & beading half round with 03mm width white plastic cane joints/ knots of cane strif shall be under the seat frame complete all as directed by Engineer-in-charge. |
| 424 | Removing of broken/ damaged plastic cane from Chair Writing (Drg No FD-20 (M)/ 202/ 250/ 280) with new white plastic cane 02mm width best quality & beading half round with 03mm width white plastic cane joints/ knots of cane strif shall be under the seat frame complete all as directed by Engineer-in-charge. |
| 425 | Polishing :M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. |
| 426 | Bed Ply Top FD - 246 & 247 |
| 427 | Chair Dining FD & MAP FD-279/FD/MAP |
| 428 | Chair Dining Offrs (MAP) FD/E6/MAP/06 & FD-357 |
| 429 | Chair Easy FD-229 |
| 430 | CHAIR EASY WITH CUSHION [FD-358] |
| 431 | Chair Writing FD-280 |
| 432 | Side Board FD-241 |
| 433 | Sofa Set 04 seater with cushion FD-281 |
| 434 | Sofa Set 05 seater with cushion FD-281 |
| 435 | Table 900 x 600mm with/ without drawer FD-233/224/283/284 |
| 436 | Table Card [FD-288 & FD-352] |
| 437 | Table Centre FD-274 |
| 438 | Table Dining 06 Person FD-273/FD/E6/MAP/03 |
| 439 | Table Dining 1200 x 900 (JCOs/ OR) FD/E6/MAP/03 |
| 440 | Table dressing Gents with mirror FD-230 |
| 441 | TABLE DRESSING GENTS WITH MIRROR MAP |
| 442 | TABLE DRESSING LADIES (FD/MAP-II/07) |
| 443 | Table peg FD-277 |
| 444 | Table Writing FD-275 |
| 445 | Teapoy FD-278 Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail