|
| 1 | Items : |
| 2 | Excavating in trenches in hard/ dense soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sq m on plan and n exc 1.5 m in depth and getting out, nclcluding clearing away all grass vegetation, saplings, shurbs, brushwood, undergrowth, roots, including Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. [Work is in foul position SSR 2020 Clause no. 1.14.1.(b)/A] |
| 3 | Excavating in trenches in hard/ dense soil, n exc 1.5 m wide and exc 1.5 m and n exc 3.00 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sq m on plan exc 1.5 m and n exc 3.00 m in depth and getting out, including Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. [Work is in foul position SSR 2020 Clause no. 1.14.1.(b)/A] |
| 4 | Excavating in trenches in soft/ disintrigrated rock, n exc 1.5 m wide and exc 1.5 m and n exc 3.00 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sq m on plan exc 1.5 m and n exc 3.00 m in depth and getting out [Work is in foul position SSR 2020 Clause no. 1.14.1.(b)/A] |
| 5 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for. |
| 6 | M&L Plain cement concrete 1:4:8 ( 40 mm graded aggregate) in foundation, filling etc.. |
| 7 | M&L Brick work with sub class B bricks straight or curved on plan n exc. 6 mtr mean radius in CM 1:4. Brickwork curved to plan with mean radius n. exc. 6m with bricks roughly cut to radius or bricks with wedge shaped joint. |
| 8 | M&L Rendering 15mm thick in cement mortar 1:4 plaster. |
| 9 | M&L Setting coat 3mm thick, in cement plaster 1:2, trowelled to even and smooth finish. |
| 10 | M&L Providing cement concrete Type B2, 1:2:4 ( 40 mm graded aggregate) in surface channel, chambers, drain etc. M&L. |
| 11 | M&L Providing cement concrete Type B0, 1:2:4 (12.5 mm graded aggregate) in copings etc. |
| 12 | M&L Providing precast reinforced cement concrete 1:2:4 (20 mm graded aggregate) in cover slabs (for manholes etc. ) with plain faces set in cement mortar 1:4. |
| 13 | M&L M.S. TMT bar 10 mm dia & and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 14 | M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and simillar work; not exc 200mm thick (Horizontal or sloping), including fair finished surfaces. |
| 15 | Reinforced cement concrete type B1 1:2:4 (20 mm graded aggregate) in slab supported on walls,beams and columns in floors, roofs, chajjas, balconies canopies, deck slabs and in shelves and similar works. M&L. |
| 16 | S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') |
| 17 | M&L Preparation of new or previously untreated steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described and apply two coat of Synthetic enamel paint (ordinary tint) of approved quality over red oxide primer. |
| 18 | M&L Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required, Superficial area Exc 400 sq. cm. Please Enable Macros to View BoQ information |
