|
| 1 | REPAIR OF TRADE PATTERN AND MODULAR FURNITURE |
| 2 | REPAIRS TO CHAIR VISITOR (DRG NO- TP) |
| 3 | SEATRemoving of old unserviceable seat of chair visitor and replace the same all as specified and directed by engineer in charge. |
| 4 | BACKRemoving of old unserviceable back of chair visitor and replace the same all as specified and directed by engineer in charge. |
| 5 | REPAIRS TO COMPUTER CHAIR / REVOLVING CHAIR WITH ARMS (DRG NO - TP & FD/E6/MAP/01) |
| 6 | WHEELRemoving of old unserviceable revolving wheel from its existing position of computer chair and revolving chair and replace the same by supplying and fixing with revolving wheel PVC 40mm.to make completely functional rest all as shown on drawing or directed by Engineer-in-charge. |
| 7 | HYDRAULIC SYSTEMRemoving of old unserviceable hydraulic system from its existing position of computer chair and revolving chair and replace the same by supplying and fixing with new hydraulic system to make completely functional rest all as shown on drawing or directed by Engineer-in-charge. |
| 8 | BASERemoving of old unserviceable base from its existing position of computer chair and revolving chair and replace the same by supplying and fixing with new base to make completely functional rest all as shown on drawing or directed by Engineer-in-charge. |
| 9 | SEATRemoving of old unserviceable seat from its existing position of computer chair and revolving chair and replace the same by supplying and fixing with new seat to make completely functional rest all as shown on drawing or directed by Engineer-in-charge. |
| 10 | BACKRemoving of old unserviceable back from its existing position of computer chair and revolving chair and replace the same by supplying and fixing with new back to make completely functional rest all as shown on drawing or directed by Engineer-in-charge. |
| 11 | ARMSRemoving of old unserviceablearms from its existing position of computer chair and revolving chair and replace the same by supplying and fixing with new back to make completely functional rest all as shown on drawing or directed by Engineer-in-charge. |
| 12 | REPAIRS TO TABLE COMPUTER (DRG NO - TP & MODULAR) |
| 13 | TOPRemoving of old unserviceable top from its existing position from table computer and replace the same by supplying and fixing with new top made out of 18mm thick both side pre laminated particle board suitable size and shape and duly matching to the existing shade complete all as specified and directed by Engineer-in-charge. |
| 14 | BASERemoving of old unserviceable base from its existing position from table computer and replace the same by supplying and fixing with new base made out of 18mm thick both side pre laminated particle board suitable size and shape and duly matching to the existing shade complete all as specified and directed by Engineer-in-charge. |
| 15 | SIDE PANELRemoving of old unserviceable side panel from its existing position from table computer and replace the same by supplying and fixing with new side panel made out of 18mm thick both side pre laminated particle board suitable size and shape and duly matching to the existing shade complete all as specified and directed by Engineer-in-charge. |
| 16 | DRAWERRemoving of old unserviceable drawer from its existing position from table computer and replace the same by supplying and fixing with new drawer made out of 18mm thick both side pre laminated particle board suitable size and shape and duly matching to the existing shade complete all as specified and directed by Engineer-in-charge. |
| 17 | LOCKRemoving of old unserviceable lock from its existing position from table computer and replace the same by supply and fixing with new lock with duplicate keys of standard size & pattern suitable to the existing lock holes complete all as specified and directed by Engineer-in-charge. |
| 18 | KEYBOARD TRAYRemoving of old unserviceable keyboard tray from its existing position from table computer and replace the same by supply and fixing with new key board tray duly matching to the existing shape complete all as specified and directed by Engineer-in-charge. |
| 19 | ROLLER CHANNELRemoving of old unserviceable roller channel from its existing position from table computer and replace the same by supply and fixing with new roller channel duly matching to the existing shape and shade complete all as specified and directed by Engineer-in-charge. |
| 20 | SOFA SET 5 SEATER (DRG NO-TP)Removing existing unserviceable leather /tapestry and cushion cloth (Not less than Rs.300/- per mtr) of sofa set 5 seater needs and supply & fix new leather/tapestry cloth over a cushion and cloth mulmul as per existing shape and size all as specified and directed by Engr-in-charge. |
| 21 | SOFA SET 4 SEATER (DRG NO-TP)Removing existing unserviceable leather /tapestry and cushion cloth (Not less than Rs.300/- per mtr) of sofa set 4 seater needs and supply & fix new leather/tapestry cloth over a cushion and cloth mulmul as per existing shape and size all as specified and directed by Engr-in-charge. |
| 22 | SOFA SET 3 SEATER (DRG NO-TP)Removing existing unserviceable leather /tapestry and cushion cloth (Not less than Rs.300/- per mtr) of sofa set 3 seater needs and supply & fix new leather/tapestry cloth over a cushion and cloth mulmul as per existing shape and size all as specified and directed by Engr-in-charge. |
| 23 | REPAIR OF WOODEN, STEEL AND MODULAR FURNITURE |
| 24 | WOODEN FURNITURES |
| 25 | REPAIRS TO BED WITH PLY TOP FOR THE FOLLOWING (DRG No.FD-246):- |
| 26 | HEAD BOARDRemoving decayed head board from its existing position and replace the same with new head board of overall size 900 x 610mm, frame made out from well seasoned 1st class hard wood (Teak/Seasam) batten 75mm x 22mm thick with soft wood (chair batten 03 Nos board), 4mm thick one side teak face BWR grade, type BB Ply wood (three Nos of ply) and other side commercial to be provided on both sides of the head board covering the soft wood batten, 12mm dia half cut teak wood beading shall be provided to join the ply wood and Hollock wood frame all as Shown on drawing. (Make of Ply wood : Century Ply/Greenply/National ply/Kit ply as approved). |
| 27 | FOOT BOARDRemoving decayed foot board from its existing position and replace the same with new foot board of overall size 900mm long and 300mm height, frame made out from well seasoned 1st class hard wood (Teak/Seasam) batten 75mm x 22mm thick with soft wood (chair batten 03 Nos board), 4mm thick one side teak face BWR grade, type BB Ply wood (three Nos of ply) and other side commercial to be provided on both sides of the foot board covering the soft wood batten, 12mm dia half cut teak wood beading shall be provided to join the ply wood and Hollock wood frame all as Shown on drawing. (Make of Ply wood : Century Ply/Greenply/National ply/Kit ply as approved). |
| 28 | LONG RAILRemoving of each decayed long rail from its existing position and replace the same with new well seasoned 1st class hard wood (Teak/Seasam) long rail of size 95mmx35mmx1980mm long rounded one edges or face made out from well seasoned wood all as shown on drawing. |
| 29 | SHORT RAILRemoving of each decayed short rail from its existing position and replace the same with new well seasoned 1st class hard wood (Teak/Seasam) short rail of size 95mmx35mmx900mm short rounded one edges or face made out from well seasoned wood all as shown on drawing. |
| 30 | STIFFNERRemoving of each decayed stiffner from its existing position and replace the same with new well seasoned 1st class hard wood (Teak/Seasam) stiffner of size 60mmx40mmx880mm long rounded one edges or face made out from well seasoned wood all as shown on drawing. |
| 31 | MS FLAT IRON STIFFNERRemoving old MS stiffener from hard bed and replace the same with MS flat iron of size 35mmx5mmx150mm, bent at right angle at four corner all as shown on drawing. |
| 32 | TOPRemoving decayed/wornout top from its existing position and replace the same with new plywood made out from 12mm thick plywood (seven Nos of ply), BWR grade, type BB fixed to wooden rails with screws all as shown on drawing. (Make of Ply wood : Century Ply/Greenply/National ply/Kit ply as approved). |
| 33 | POLISHING TO BED WITH PLY TOP Removal of old existing worn out polish from exposed portion of wooden surface by any means of bed with ply top including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge . |
| 34 | REPAIRS TO CHAIR DINING FOR THE FOLLOWING (DRG No.FD-16(M), FD-279):- |
| 35 | FRONT LEGRemoving of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 36 | REAR LEGRemoving of each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 37 | FRONT RAILRemoving of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing. |
| 38 | REAR RAILRemoving of each decayed rear rail from its existing position and replace the same with new rear rail made out from well seasoned1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing |
| 39 | SIDE RAILRemoving of each decayed side rail from its existing position and replace the same with new side rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing . |
| 40 | REAR STIFFNERRemoving of each decayed rear stiffener from its existing position and replace the same with new rear stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 41 | STIFFNERRemoving of each decayed stiffener from its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 42 | HARD RUBBER/PVC RINGRemoving of each decayed hard rubber/PVC ring from its existing position of chair dinning (FD-161M, FD-279), Chair writing (FD-280), Chair Easy (FD-281), FD-229) and replace the same with new hard rubber/PVC ring all as shown on drawing and directed by Engineer-in-Charge. |
| 43 | POLISHING TO CHAIR DININGRemoval of old existing worn out polish from exposed portion of wooden surface by any means of chair dinning including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge. |
| 44 | REPAIR TO CHAIR WRITING FOR THE FOLLOWING (DRG No.FD-280 ):- |
| 45 | FRONT LEGRemoving of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 46 | REAR LEGRemoving of each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 47 | FRONT RAILRemoving of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing. |
| 48 | REAR RAILRemoving of each decayed rear rail from its existing position and replace the same with new rear rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing. |
| 49 | SIDE RAILRemoving of each decayed side rail from its existing position and replace the same with new side rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing. |
| 50 | REAR STIFFNERRemoving of each decayed rear stiffner from its existing position and replace the same with new rear stiffner made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 51 | STIFFENERRemoving of each decayed stiffner from its existing position and replacae the same with new stiffner made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 52 | ARMRemoving of each decayed arm from its existing position and replace the same with new arm made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 53 | POLISHING CHAIR WRITINGRemoval of old existing worn out polish from exposed portion of wooden surface by any means of chair writing including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous making, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge. |
| 54 | REPAIRS TO CHAIR EASY FOR THE FOLLOWING (DRG NO.FD-281, FD-229):- |
| 55 | FRONT LEGRemoving of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 56 | REAR LEGRemoving of each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 57 | FRONT RAILRemoving of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing. |
| 58 | REAR RAILRemoving of each decayed rear rail from its existing position and replace the same with new rear rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing. |
| 59 | SIDE RAILRemoving of each decayed side rail from its existing position and replace the same with new side rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing. |
| 60 | ARMRemoving of each decayed arm from its existing position and replace the same with new arm made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 61 | POLISHING TO CHAIR EASY Removal of old existing worn out polish from exposed portion of wooden surface by any means of chair easy including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with sheelac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-charge. |
| 62 | RECANNING OF VARIOUS TYPE OF CHAIRS FOR THE FOLLOWING (DRG NO.FD-279, FD-280, FD-281, FD-229) :-Removing of old unserviceable cane plastic from various chairs such as chair dining, chair writing and chair easy etc re-canning the same with new cane plastic 2mm wide half round white in colour for main canning and 3.5 to 4mm wide half round white in colour for border as approved quality all as shown on drawing. |
| 63 | REPAIRS TO TABLE 3’X2’ W/O DRAWER FOR THE FOLLOWING [DRG NO. FD-284, FD-55, FD-42(M)]:- |
| 64 | LEGRemoving decayed each leg from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 65 | TOP RAIL LONGRemoving decayed each top long rail from its existing position and replace the same with new top long rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 66 | TOP RAIL SHORTRemoving decayed each top short rail from its existing position and replace the same with new top short rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 67 | STIFFNERRemoving decayed each stiffner from its existing position and replace the same with new stiffner made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 68 | TOPRemoving decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior grade), grade-I quality, prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak/Seasam) beading allround the edging provide middle stiffner at the bottom 100mm high between the lower short side rails and provide PVC shoes 25mm dia and 25mm high shall be screwed to bottom of all legs all as shown on drawing. |
| 69 | POLISHING TO TABLE 3'x2' W/O DRAWERRemoval of old existing worn out polish from exposed portion of wooden surface by any means of table 3'X2' without drawer including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous making, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge. |
| 70 | REPAIRS TO TABLE 3’X2’ WITH DRAWER FOR THE FOLLOWING [DRG NO. FD-284, FD-42(M) ]:- |
| 71 | LEGRemoving decayed each leg from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 72 | TOP RAIL LONGRemoving decayed each top long rail from its existing position and replace the same with new top long rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 73 | TOP RAIL SHORTRemoving decayed each top short rail from its existing position and replace the same with new top short rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 74 | STIFFNERRemoving decayed each stiffner from its existing position and replace the same with new stiffner made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 75 | TOPRemoving decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior grade), grade-I quality, prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak/Seasam) beading allround the edging provide middle stiffner at the bottom 100mm high between the lower short side rails and provide PVC shoes 25mm dia and 25mm high shall be screwed to bottom of all legs all as shown on drawing. |
| 76 | DRAWERRemoving decayed and replace the drawer made out from well seasoned 1st class hard wood (Teak/Seasam) for front, rear & side with track rail, guide rail & fillet and bottom shall be made out from 6mm thick plywood (five Nos of ply), type BB, BWR grade complete all as shown on drawing. |
| 77 | POLISHING TO TABLE 3'x2' WITH DRAWERRemoval of old existing worn out polish from exposed portion of wooden surface by any means of table 3'X2' with drawer including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge. |
| 78 | REPAIRS TO TABLE DINING FOR 6 PERSONS FOR THE FOLLOWING (DRG NO. FD-30, FD-239, FD-273):- |
| 79 | LEGRemoving decayed each leg from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 80 | TOP RAIL LONGRemoving decayed each top long rail from its existing position and replace the same with new top long rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 81 | TOP RAIL SHORTRemoving decayed each top short rail from its existing position and replace the same with new top short rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 82 | STIFFNERRemoving decayed each stiffner from its existing position and replace the same with new stiffner made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 83 | TOPRemoving decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior grade), grade-I quality, prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak/Seasam) beading allround the edging provide middle stiffner at the bottom 100mm high between the lower short side rails and provide PVC shoes 25mm dia and 25mm high shall be screwed to bottom of all legs all as shown on drawing. |
| 84 | HARD RUBBER/PVC TOESRemoving of each decayed hard rubber/toe from its existing position and replace the same with new hard rubber/PVC toe 25mm dia and 25mm high all as shown on drawing and directed by Engr-in-Charge. |
| 85 | POLISHING TO TABLE DINING FOR 6 PERSONSRemoval of old existing worn out polish from exposed portion of wooden surface by any means of table dinning of 6 person including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous making, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge. |
| 86 | REPAIRTS TO TABLE CENTRE FOR THE FOLLOWING (DRG NO.FD-29 , FD-235, FD-274, TP ):- |
| 87 | LEGRemoving decayed each leg from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 88 | TOP RAIL LONGRemoving decayed each top long rail from its existing position and replace the same with new top long rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 89 | TOP RAIL SHORTRemoving decayed each top short rail from its existing position and replace the same with new top short rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 90 | STIFFENERRemoving decayed each stiffner from its existing position and replace the same with new stiffner made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 91 | TOPRemoving decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior grade), grade-I quality, prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak/Seasam) beading allround the edging provide middle stiffner at the bottom 100mm high between the lower short side rails and provide PVC shoes 25mm dia and 25mm high shall be screwed to bottom of all legs all as shown on drawing. |
| 92 | POLISHING TO TABLE CENTRERemoval of old existing worn out polish from exposed portion of wooden surface by any means of table centre including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge. |
| 93 | REPAIRS TO TABLE PEG FOR THE FOLLOWING (DRG NO.FD-25, FD-236, FD-277, FD-384):- |
| 94 | LEGRemoving decayed each leg of table peg from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 95 | TOP SHORT RAILRemoving decayed each top short rail from its existing position and replace the same with new short rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 96 | TOP LONG RAILRemoving decayed each top long rail from its existing position and replace the same with new long rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 97 | STIFFNERRemoving decayed each stiffner from its existing position and replace the same with new stiffner made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 98 | TOPRemoving decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior grade), grade-I quality, prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak/Seasam) beading allround the edging provide middle stiffner at the bottom 100mm high between the lower short side rails and provide PVC shoes 25mm dia and 25mm high shall be screwed to bottom of all legs all as shown on drawing. |
| 99 | POLISHING TO TABLE PEGRemoval of old existing worn out polish from exposed portion of wooden surface by any means of table peg including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge. |
| 100 | REPAIR/REPLACEMENT OF FOAM CUSHION OF CHAIR DINING OFFICER (DRG NO.FD/MAP-II/04):- |
| 101 | Removal of old unserviceable foam, cushion of chair dining officers set (comprising of 06 Nos single cushion of seat) and supply and fixing new foam cushion 75mm thick, 450mm x 450mm, 40/32 density, covered with approved quality tapestry cloth (cost of tapestry cloth shall not be less than Rs. 200.00 per metre) and rest all as per Drawing/Directed by Engr-in-charge |
| 102 | STIFFNERRemoving decayed each stiffner from its existing position and replace the same with new stiffner made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing. |
| 103 | POLISHING TO CHAIR DINING OFFICER (DRG NO. FD/MAP-II/04)Removal of old existing worn out polish from exposed portion of wooden surface by any means of chair dinning officer including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-charge. |
| 104 | STEEL FURNITURES |
| 105 | REPAIR OF ALMIRAH LARGE AND MEDIUM STEEL (DRG NO.FD-67, FD-1032, FD-1033, FD-1031, FD-1034) |
| 106 | LEGSS&F for new leg made out from MS sheet 1.6mm thick and applying one coat of red oxide zinc chrome primer over two coats of synthetic enamel paint with spray painting by the spray gun after removing of each old worn out legs from its existing portion of Almirah large steel with shelves and Almirah medium steel with shelves and replace the same complete all as specified and directed and as shown on drawing. |
| 107 | HANDLESS&F for new handle made out from mild steel over chromium plated of size 150mm size and weight of each handle should not be less than 185gm of existing pattern after removing of old unserviceable / broken handle from its existing position of almirah large steel with shelves and almirah medium steel with shelves and replace same complete all as specified and directed and as shown on drawing. |
| 108 | LOCKSS&F for new brass, six lever (Make : Godrej) lock with steel CP duplicate keys, weight of each lock should not be less than 260gm after removing of old unserviceable lock from its existing position of almirah large steel with shelves and almirah medium steel with shelves and replace same complete all as specified and directed and as shown on drawing. |
| 109 | SHELVES FOR ALMIRAH LARGE STEEL WITH SHALVES (DrgNo. FD-67(M), FD-1031 & FD-1032).S&F for new shelf made out of MS Sheets of 1.00mm thick and applying one coat of red oxide zinc chrome primer over two coats of synthetic enamel paint with spray painting by spray gun after removing of old worn out shelf from its existing portion of almirah large steel with shelves and replace same complete all as specified and directed and as shown of drawing. |
| 110 | SHELVES FOR ALMIRAH MEDIUM STEEL WITH SHALVES (DrgNo. FD-67(M), FD-1031 & FD-1032).S&F for new shelf made out of MS Sheets of 1.00mm thick and applying one coat of red oxide zinc chrome primer over two coats of synthetic enamel paint with spray painting by spray gun after removing of old worn out shelf from its existing portion of almirah medium steel with shelves and replace same complete all as specified and directed and as shown of drawing. |
| 111 | PAINTINGS OF ALMIRAH LARGE STEEL WITH SHALVES (DrgNo. FD-67(M), FD-1031 & FD-1032).M&L for applying spray painting two coats with synthetic enamel (Olive Green) paint internally and externally by spray gun after removing of existing old worn out paint by any means with proper treatment from almirah large steel with shelves complete all as directed shown drawings. |
| 112 | PAINTINGS OF ALMIRAH MEDIUM STEEL WITH SHALVES (DrgNo. FD-67(M), FD-1031 & FD-1032).M&L for applying spray painting two coats with synthetic enamel (Olive Green) paint internally and externally by spray gun after removing of existing old worn out paint by any means with proper treatment from almirah medium steel with shelves complete all as directed shown drawings. |
| 113 | REPAIRS TO CHAIR CB STEEL WITH ARMS FOR THE FOLLOWING [DRG NO.FD-75(M)] |
| 114 | WOODEN FRAME SEATS&F of canned with wooden seat frame made out from well seasoned teak wood duly canned as per Godrej pattern with new plastic cane of 2mm to 2.5mm wide half round oval shape for caning and 4mm wide of half round oval shape cane for bedding & applying two coats of black polish after removing of unserviceable /decayed seat frame from existing portion from chair CB steel with arm as replaced all as directed and shown on drawing. |
| 115 | WOODEN FRAME BACKS&F of canned with wooden back frame made out from well seasoned teak wood duly canned as per Godrej pattern with new plastic cane of 2mm to 2.5mm wide half round oval shape for caning and 4mm wide of half round oval shape cane for bedding & applying two coats of black polish after removing of unserviceable /decayed back frame from existing portion from chair CB steel with arm as replaced all as directed and shown on drawing. |
| 116 | WOODEN ARM FOR CHAIR CB STEEL WITH ARMSS&F the new arm made out from well seasoned teak wood and apply two coats of black polish including removing broken arm from its existing portion of chair CB steels with arm all as directed and shown on drawing. |
| 117 | STIFFENER FOR CHAIR CB STEEL WITH ARMS&F with new MS flat of stiffener size 520mmx15mmx4mm by welding including two coats of synthetic (Olive Green) paint over one coat of red oxide zinc chrome primer including removing of old worm out MS cleat from its existing position from chair CB steel with arm complete all as directed and shown on drawing. |
| 118 | PAINTINGS OF CHAIR CB STEEL WITH ARMS [Drg No.FD-75(M)]M & L for applying spray painting two coats with synthetic enamel (Olive Green) paint internally and externally by spray gun after removing of existing old worn out paint by any means with proper treatment from Chair CB steel with arm complete all as directed shown drawings. |
| 119 | REPAIRS TO TABLE OFFICE CLERK STEEL FOR THE FOLLOWING (DRG NOFD-84, FD-381, FD-1004):- |
| 120 | LEGRemoving of old unserviceable leg from its existing position and replace the same with new leg made out of MS square pipe 25mm 16 gauge all as shown on drawing. |
| 121 | DRAWERRemoving of old unserviceable drawer from its existing position and replace the same with new drawer made out of 20 gauge MS sheet all as shown on drawing. |
| 122 | LOCK & KEYSRemoving of old unserviceable lock of table office clerk steel and supplying and fixing with new brass six lever Godrej pattern lock with steel CP duplicate keys all as shown on drawing. (Make : Godrej/Link as approved.) |
| 123 | TOPRemoving decayed top from its existing position and replace the same with new top made out from 18mm thick veenered particle board (exterior grade), grade-I quality, with commercial veeners on both sides with 1.00mm thick plastic laminated sheet (Plain & wood grain)pasted over particle board with approved synthetic resin adhesive with 6mm thick well seasoned second class hard wood beading alround the edging all as shown on drawing. (Make of ply wood : Century/Greenply/National ply/Kit ply as approved) |
| 124 | PAINTINGS OF TABLE OFFICE CLERK STEEL (Drg No.FD-84)M & L for applying spray painting two coats with synthetic enamel (Olive Green) paint internally and externally by spray gun after removing of existing old worn out paint by any means with proper treatment from Table office clerk steel complete all as directed shown drawings. |
| 125 | REPAIRS TO TABLE OFFICE OFFICER STEEL FOR THE FOLLOWING (DRG NO.FD-84, FD-1003):- |
| 126 | LEGRemoving of old unserviceable leg from its existing position and replace the same with new leg made out of MS square pipe 25mm 16 gauge all as shown on drawing. |
| 127 | DRAWERRemoving of old unserviceable drawer from its existing position and replace the same with new drawer made out of 20 gauge MS sheet all as shown on drawing. |
| 128 | LOCK & KEYSRemoving of old unserviceable lock of table office clerk steel and supplying and fixing with new brass six lever Godrej pattern lock with steel CP duplicate keys all as shown on drawing. Make : Godrej/Link as approved. |
| 129 | TOPRemoving decayed top from its existing position and replace the same with new top made out from 18mm thick veenered particle board exterior grade with commercial veeners on both sides with 1.00mm thick plastic laminated sheet (Plain & wood grain) pasted over particle board with approved synthetic resin adhesive with 6mm thick well seasoned second class hard wood beading alround the edging all as shown on drawing. Make of particle board : Century ply/ Greenply/National ply/Kit ply as approved. |
| 130 | PAINTINGS OF TABLE OFFICE OFFICER STEEL (Drg No. FD-84, FD-1003)M&L for applying spray painting two coats with synthetic enamel (Olive Green) paint internally and externally by spray gun after removing of existing old worn out paint by any means with proper treatment from table office officer steel complete all as directed shown drawings. |
| 131 | REPAIRS TO CHAIR VISITOR FOR THE FOLLOWING (DRG NO- TP) |
| 132 | Removing of old unserviceable seat of chair visitor and replace the same all as specified and directed by engineer in charge. |
| 133 | Removing of old unserviceable back of chair visitor and replace the same all as specified and directed by engineer in charge. |
| 134 | REPAIRS TO COMPUTER CHAIR / REVOLVING CHAIR WITH ARMS FOR THE FOLLOWING (DRG NO - TP & FD/E6/MAP/01) |
| 135 | WHEELRemoving of old unserviceable revolving wheel from its existing position of computer chair and revolving chair and replace the same by supplying and fixing with revolving wheel PVC 40mm.to make completely functional rest all as shown on drawing or directed by Engineer-in-charge. |
| 136 | HYDRAULIC SYSTEMRemoving of old unserviceable hydraulic system from its existing position of computer chair and revolving chair and replace the same by supplying and fixing with new hydraulic system to make completely functional rest all as shown on drawing or directed by Engineer-in-charge. |
| 137 | BASERemoving of old unserviceable base from its existing position of computer chair and revolving chair and replace the same by supplying and fixing with new base to make completely functional rest all as shown on drawing or directed by Engineer-in-charge. |
| 138 | SEATRemoving of old unserviceable seat from its existing position of computer chair and revolving chair and replace the same by supplying and fixing with new seat to make completely functional rest all as shown on drawing or directed by Engineer-in-charge. |
| 139 | BACKRemoving of old unserviceable back from its existing position of computer chair and revolving chair and replace the same by supplying and fixing with new back to make completely functional rest all as shown on drawing or directed by Engineer-in-charge. |
| 140 | ARMSRemoving of old unserviceablearms from its existing position of computer chair and revolving chair and replace the same by supplying and fixing with new back to make completely functional rest all as shown on drawing or directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
