|
| 1 | Taking out doors, windows and clerestory windows (steel or wood) incl. stacking with in 50 metere lead. Of area of 3 sqm or below. |
| 2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.For thickness of tiles 10 mm to 25 mm. |
| 3 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix). |
| 4 | Cutting holes of required size in brick/Stone masonary wall for fixing of exhaust fan incl providing and fixing 300mm dia PVC pipe and making good the same etc. complete as per directions of EIC. |
| 5 | Brick masonary in cement mortar (1:6) 1cement:6sand in FPS bricks of designation 7.5 non-modular type, above plinth level and upto floor-IV level. |
| 6 | Providing applying 12mm cement plaster in (1:4) mix of cement sand on walls. |
| 7 | Providing and laying in position cement concrete of specified grade excl. the cost of centering and shutering. All work upto plinth level 1:2:4 (1cement: 2 fine sand: 4 graded stone aggregate 20mm nominal size)(Crushed). Including carriage of all materials involved with loading unloading and stacking complete. |
| 8 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 9 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigmentsetc. complete. Size of tile 600x600 mm. |
| 10 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. |
| 11 | Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Long pattern W.C Pan of size 580x440 mm. |
| 12 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: |
| 13 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer. |
| 14 | Providing wood work in frames of doors, windows, clerestory windows & other frames, wrought framed & fixed in position Imported wood. |
| 15 | Providing & fixing panelled or panelled & glazed shutters for doors & windows and clerestory windows including ISImarked black enamelled M.S Butt hingeswith necessary screws excluding panelling ( imported wood) 30mm thick. |
| 16 | Providing & fixing glazed shutters for doors & windows and clerestory windows using 3.5mm thick float galss panes including ISI marked M.S pressed Butt hinges bright finshed of required size with necessary screws. Imported wood 30mm thick. |
| 17 | P/F 3-layer PP-R pipes comforming to IS-15801, UV stablized and anti-microbial fusion incl all PP-R plain and brass threaded PP-R random fittings (as per directions of EIC) |
| 18 | PN-16 Pipe (25mm OD) |
| 19 | PN-16 Pipe (32mm OD) |
| 20 | P/F of PVC pipes of standard make and quality in all necessary fittings and fixtures, and bends, reducers, unions etc.) |
| 21 | 4 inch dia. |
| 22 | 3 inch dia. |
| 23 | 2 inch dia. |
| 24 | Providing fixing of sanitary fittings of approved brand and make and strictly as per directions of EIC. |
| 25 | P/F Floor traps with grattings |
| 26 | P/F CP wastes |
| 27 | P/F Angle valve |
| 28 | P/F Bib cocks (Long nose type and of standard quality.) |
| 29 | P/F Plain Mixer (standard quality and as per directions of EIC.) |
| 30 | P/F PVC connections |
| 31 | P/F soap cases |
| 32 | P/F Mirrors of standard quality as approved by EIC (452x357mm) |
| 33 | P/F Towel rods |
| 34 | P/F Geysar of approved brand and make of 50 ltr capacity and as approved by EIC. |
| 35 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement: 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight ofcover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 20.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. |
| 36 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15). |
| 37 | Providing and fixing of ACP sheet 2 mm thick of approved make including frame work of aluminiun beading/ aluminium tube whereever necessary complete job. |
| 38 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm). |
| 39 | Providing and fixing of Anodised Aluminium tower bolt (barrel type) 100 x10 mm including cost of all hardwares required. |
| 40 | Providing and fixing 100 mm mortice lock with 6 levers for aluminium door. |
| 41 | Providing and fixing of anodised Aluminium handles 125 mm. |
| 42 | Providing applying two or more coats of synthetic enamal paint for doors windows incl. primer of approved make/quality. |
| 43 | Distempering with oil bound washable distemper of approved brand and manufacture two or more coats incl. priming coat with water thinnable cement primer. |
| 44 | Providing and fixing of RCC spun rings for soackage pit including excavation, cost and carriage of rings all complete. |
| 45 | Providing and fixing of RCC lid for soackage pit including excavation, cost and carriage of rings all complete. |
| 46 | Carriage of materials by Mechanical transport. |
| 47 | Sand and aggregate for an average lead of 12 km |
| 48 | Bricks for an avg. lead of 25 km Please Enable Macros to View BoQ information |
