Tender For Construction Of Bore Well With Allied Works At Lane 04 Friends Colony Humhama District Budgam.
Tender Overview
Project Description
Tender for Construction Of Bore Well With Allied Works At Lane 04 Friends Colony Humhama District Budgam.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-Jun-2026 | Extension Notice 1st | Date | 02-Jul-2026 |
| 2 | 02-Jul-2026 | Extension Notice 2nd RT | Date | 14-Jul-2026 |
| 3 | 14-Jul-2026 | Extension Notice 3rd of RT 2nd | Date | 25-Jul-2026 |
| 4 | 27-Jul-2026 | Extension Notice 4th of RT 2nd | Date | 07-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Drilling of 125 mm diameter tube well by air rotary drilling rig unit suitable for lowering of MS casing of 125mm diameter in suitably drilled bore hole as per specifications laid down in IS 2800 (Part-I ) with up to date amendments. The job is to be done in all kinds of soils, boulder, rocks, collapsible strata, saturated soils, artisan conditions by ODEX/DTH attachments and exploration of ground water by tapping sufficient aquifer zones. The job includes the cost of shifting of drilling accessories, tools, bits, casing shoe, consumables like fuel, lubricants, skilled and unskilled labours and other unforeseen items. Development of tube well with backwash method with air compressor of minimum capacity 1000 CFM (300 PSI air delivery system) with suitable arrangements till well is thoroughly developed in all respects as per the directions of site engineer. |
| 2 | Supplying, assembling, lowering and fixing in vertical position in bore well ERW Fe 410 mild steel screwed or socketed/plain ended 125 mm nominal dia (MS 125 mm) casing pipe conforming to IS: 4270:2001 with upto date amendments of reputed & approved make, including painting of outside brand and manufacture including required transportation hire & labor charges, fitting/welding and accessories all complete for all depths as per direction of engineer in charge. The casing pipe is to be slotted as per the site requirement and as directed by site engineer. |
| 3 | Providing, Fitting, and commissioning of Single Phase Submersible type pumping unit along with allied jobs. Complete details of the job are: P/F/T and commissioning of single phase pumping equipment following specifications: Power: 1.5 H.P/2HP, Discharge – 800-600 GPH, Head 70-90 mtrs. The pump motor is coupled together with a steel coupling. The job includes lowering of the submersible pump equipment and P/F starter. |
| 4 | Providing and fitting of 32 mm dia.GI (B-class) column pipe. The pipe is properly threaded at both ends and the length of each pipe is 3 m. The pipe is provided and fitted with GI sockets for jointing purpose. |
| 5 | Providing and fitting of 05 KVA single phase automatic/manual voltage stabilizer as per site requirement. The job also includes P/F of copper wire of suitable gauge required for connecting of incoming and outgoing connections. |
| 6 | Providing and Fitting of submersible cable of 2.5 sq. mm for connecting pumping unit. |
| 7 | Providing and Fitting of 32 mm dia. MS holding clamps fabricated out of 10 mm thick MS Plate with nuts and bolts. |
| 8 | Providing and fitting of reducer 32mm – 25 mm dia. The job also includes P/F of 32mm dia G.I bend. MOC: B class, well cap of required dia. |
| 9 | Providing and Fitting of 05 mm Steel wire rope for holding submersible pumping unit. |
| 10 | Providing/Laying of Plain Cement Concrete block of size 4ft×4ft×1ft in 1:3:6 mix to give adequate strength to act as a sanitary block for the well and to grout the hand pump assembly in order to make it robust to resist shock load observed while pumping. The job includes Providing/laying of PCC edges of 4”×4” in 1:3:6 mix and P/L of cement plaster in 1:4 mix to the above block to give aesthetically good appearance. Cost on account of stuttering, strutting, centering, curing etc. is included in the scope of work. In case the suitable space for the above specification is not available, the surface area is to be adjusted accordingly. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender