|
| 1 | Dismantling concrete |
| 2 | Cement concrete plain1:2:4 mix |
| 3 | Cement Concrete 1:2:4 with stone ballast or shingle.mixing by manual means |
| 4 | Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. |
| 5 | 15mm i/d |
| 6 | 20mm i/d |
| 7 | 25mm i/d |
| 8 | 50mm i/d |
| 9 | Providing, fixing and jointing G.I Union Couplings(of approved make with the approval of EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. |
| 10 | 15mm i/d G.I. Union |
| 11 | 20mm i/d G.I. Union |
| 12 | 25mm i/d G.I. Union |
| 13 | 50mm i/d G.I. Union |
| 14 | Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete. |
| 15 | 15mm i/d Gun Metal peet valve heavy pattern. |
| 16 | 25mm i/d Gun Metal peet valve heavy pattern. |
| 17 | 50mm i/d Gun Metal peet valve heavy pattern. |
| 18 | Making connection with the existing G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee) complete in all respects. |
| 19 | Plastic Ball Cock with rod and PlasticBall Providing and fixing in position automatic brass Ball Cock in tanks. 25mm i/d |
| 20 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -incharge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. |
| 21 | Triple Layer Tanks |
| 22 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-incharge) in PVC Water storage tanks complete in all respect. |
| 23 | G.I. tank nipple 25mm i/d |
| 24 | Providing and fixing MS Angle Iron Shed for Electrial Motor with fibre sheet on top fixing with rivets as per approval of Engineer in charge including cost of material and labour complete in all respects. |
| 25 | Dismantling of old GI pipe 2\\" complete in all respect |
| 26 | Providing and fixing of Kirloskar/Crompton make terrace pump in back pull out design having 50 mm suction, 32 mm delivery, CI casing, bronze impeller and CS shaft with gland packing arrangement on common baseplate to Kirloskar or equivalent make, 2900 RPM TEFC sq. cage induction motor suitable for 3phase, 415V, 50 Hz AC supply confirming to through suitable flexible coupling. The pump set is suitable for following duties: 900 LPM at 30mtr head complete in all respects. |
| 27 | Providing, installing, testing and commissioning of 3 Phase Pumping Motor, 5 HP capacity, suitable for minimum 30 metre head, of Crompton or equivalent approved make, complete in all respects including all allied accessories and satisfactory functioning at site. |
| 28 | Providing, installing, testing and commissioning of Sludge Pump, 3 HP capacity, of Crompton or equivalent approved make, complete in all respects including all allied accessories, fittings and satisfactory functioning at site. |
| 29 | Providing and installing panel for new motor complete in all respect |
| 30 | Repairing of 3 Phase 12.5 HP Monoblock Pump Set including rewinding of motor, replacement of worn-out parts, servicing, testing and commissioning, complete in all respects. |
| 31 | Providing Thread Cutting Tool Kit of 2\\" complete in all respect |
| 32 | Construction of platform for water booster pump complete in all respect |
| 33 | Carriage of Material from ground floor to required floor complete in all respects |
| 34 | Carriage of Malba from site of work to dumping ground. |
| 35 | Rebate on old material Please Enable Macros to View BoQ information |
