Tender For Construction Of Hand Pump/Bore Well Near Bajard Mohalla Jewan Shab Ladhoo P Ore Pulwama Along Providing Fitting Of Sub. Pump And Allied Works (110M Depth).
Tender Value
6.10 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
3 days left
EMD
18300
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bajard Mohalla Jewan Shab Ladhoo Pampore Pulwama → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Hand Pump/Bore Well Near Bajard Mohalla Jewan Shab Ladhoo P Ore Pulwama Along Providing Fitting Of Sub. Pump And Allied Works (110M Depth).
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-Jun-2026 | Extension Notice 1st | Date | 02-Jul-2026 |
| 2 | 02-Jul-2026 | Extension Notice 2nd RT | Date | 14-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Drilling of 125 mm diameter tube well by air rotary drilling rig unit suitable for lowering of MS casing of 125mm diameter in suitably drilled bore hole as per specifications laid down in IS 2800 (Part-I) with up to date amendments. The job is to be done in all kinds of soils, boulder, rocks, collapsible strata, saturated soils, artisan conditions by ODEX/DTH attachments and exploration of ground water by tapping sufficient aquifer zones. The job includes the cost of shifting of drilling accessories, tools, bits, casing shoe, consumables like fuel, lubricants, skilled and unskilled labours and other unforeseen items. Development of tube well with backwash method with air compressor of minimum capacity 1000 CFM (300 PSI air delivery system) with suitable arrangements till well is thoroughly developed in all respects as per the directions of site engineer. |
| 2 | Supplying, assembling, lowering and fixing in vertical position in bore well ERW Fe 410 mild steel screwed or socketed/plain ended 125 mm nominal dia (MS 125 mm) casing pipe conforming to IS: 4270:2001 with up to date amendments of reputed and approved make, including painting of outside brand and manufacture including required transportation hire and labor charges, fitting/welding and accessories all complete for all depths as per direction of engineer in charge. The casing pipe is to be slotted as per the site requirement and as directed by site engineer. |
| 3 | Providing, fitting and commissioning of single phase submersible type pumping unit along with allied jobs. Complete details of the job are as under: • P/F/T and commissioning of single phase pumping equipment with following specifications: Power = not less than 1.5 HP, Discharge = 700-500 GPH, Head = 70-90m, Make: Reputed The pump motor is coupled together with a steel coupling. The job includes lowering of the submersible pump equipment and P/F Starter |
| 4 | Providing/Fitting of risers 32 mm dia GI (Class-B) column pipe The pipe is propoerly threaded at both the ends and the length of each pipe is 3M. The pipe is provided and fitted with GI socket for jointing purpose, |
| 5 | Providing/Fitting of 05 KVA single phase automatic voltage stablizer, (Dry type). The job also includes P/F of copper wire of suitable guage required for connecting of incoming and outgiong connections. |
| 6 | P/F of submersible cable 2.5 sq. mm, connecting pumping unit. |
| 7 | P/F of 32mm dia MS holding clamps fabricated out of 10mm thick MS plate with nuts and bolts. |
| 8 | P/F of reducer 32mm dia- 25mm dia. The job also includes providing and fitting of 32mm dia GI bend well cap. |
| 9 | Providing and fitting of 5mm steel wire rope for holding submersible pumping unit. |
| 10 | Providing/Laying of Plain Cement Concrete block of size 4ft x 4f x 1ft in 1:3:6 mix to give adequate strength to act as a sanitary block for the well and to grout the hand pump assembly in order to make it robust to resist shock load observed while pumping. The job includes Providing/laying of PCC edges of 4\\" x 4\\" in 1:3:6 mix and P/L of cement plaster in 1:4 mix to the above block to give aesthetically good appearance. Cost on account of stuttering, strutting, centring, curing etc. is included in the scope of work. In case the suitable space for the above specification is not available, the surface area is to be adjusted accordingly. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 02, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 14, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender