|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 2 | M & L Vitrified ceramic tiles (light shade) 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6 ,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed. |
| 3 | Ditto all as above but in skirting over 10mm thick backing coat in CM 1:4 complete all as specified and directed |
| 4 | M&L for Double charged/GVT Vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors including screed bed 15mm thick in Cm 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 5 | Ditto all as above but in skirting over 10mm thick backing coat in CM 1:4 complete all as specified and directed |
| 6 | M & L for joint free non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.06 but n exc 0.11 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over and including 15mm screed in CM 1:6 or with chemical cement to match all as directed. |
| 7 | M&L for joint free coloured glazed ceramic tiles in vertical surface of size 300X 600X 7mm thick of different shade colour and pattern as approved, over and including 10 mm thick rendering in CM 1:4 as backing coat finished to receive wall tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed and specified. |
| 8 | M&L for joint free coloured glazed ceramic tiles in vertical surface of size 300X 450X 7mm thick of different shade colour and pattern as approved, over and including 10 mm thick rendering in CM 1:4 as backing coat finished to receive wall tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed and specified. |
| 9 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed |
| 10 | M&L for cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in coping, bed blocks, filling of hold fast PCC or similar works including formwork complete all as specified and directed. |
| 11 | M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate ) as in subase finished to receive floor treatment etc complete all as directed. |
| 12 | M & L for chequered cement concrete tiles rubber moulded , 30cm x 30cm x 25mm thick confirm to IS 13801-1993 , set jointed & pointed in neat cement slurry with grey cement and pigment in floors incl Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed |
| 13 | S&L machine pressed precast concrete interlocking paver block rubber moulded, any shape and size confirming ti IS-15658-2006 of 60mm thickness grey cement and with pigment , M-35 grade incl 30mm thick Sand filling to under interlocking tiles complete all as specified and directed. |
| 14 | Demolition of stone slabs, paving stones and tiles of any description and thickness in floors, aprons, laid, bedded and pointed in any mortar complete all as specified and directed. |
| 15 | M & L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including rubbing and polishing complete all as specified. |
| 16 | M & L for 16-18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes complete all as specified. |
| 17 | M & L for 15 mm thick Artificial Granite (of any type and colour ) work steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes complete all as specified. |
| 18 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 19 | Demolition wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets all as specified and directed. |
| 20 | M&L for providing & fixing in repair false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) fixed or laid/ inserted to timber/GI/Aluminium framework with screws in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main \\"T\\" at 600 mm c/c to form a grid of 1200x600mm and secondary cross \\"T\\" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 2mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 2 mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including taking down existing ceiling of any type all complete at all heights as per direction of Engineer-in-Charge. Make: Everest/ Armsrong or equivelent |
| 21 | S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing |
| 22 | S&F 5mm thick PVC sheet fillet width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing. |
| 23 | S&F 25 mm thick interlocking WPC louvers of 25mmx 25mm(louvers size) wall thickness 1.50 to 2mm for wall panelling fixed with self tapping screw to SS clips over and and of approved colour and design complete all as specified as per manufacturerer instruction and directed by Engr-in-Charge |
| 24 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sq. m each complete all as specified and directed. |
| 25 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq m each complete all as specified and directed. |
| 26 | Taking down Shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed. |
| 27 | S&F 2nd class wood glazed & skeleton shutter 35mm thick factory made open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members of shutter as specified in SSR part-I , section 8, clause 8.24 (a) including complete all as specified and as directed. |
| 28 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed. |
| 29 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan |
| 30 | Ditto but of Frame size 65x 125 mm double rebate |
| 31 | S&F 28-30 mm thick Prelaminated moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on both side with wood grain texture with density not less than 650 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified. |
| 32 | S&F 28-30 mm thick Prelaminated Flush WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded side with wood grain texture with density not less than 650 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified. |
| 33 | S&F 28-30 mm thick Prelaminated WPC factory made 100% Sketon/Glased door (conforming as per IS-4020) made from 100% lead free single extruded on both side with wood grain texture and with density not less than 650 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified |
| 34 | S&F 30mm thick flush door shutters solid core construction with block board core and plywood face panels commercial type on both sides etc complete all as specified and directed. |
| 35 | M&L for preparation of New untreated wooden surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 36 | S & F powder coated aluminium sections for doors, partition including fabrication of frame and fixing with necessary with one or more rebates including joining cleat for fixing etc. complete all as specified . Please Enable Macros to View BoQ information |
| 37 | S & F powder coated aluminium sections for doors, partition including fabrication of frame and fixing with necessary with one or more rebates including joining cleat for fixing etc. complete all as specified . Please Enable Macros to View BoQ information |
