|
| 1 | Providing & laying 12mm thick cement mortar of 1:4 (cement & coarse sand) as per S.O.R. chp 13 S.I. 584 +coarse sand difference of S.I. 583-582). |
| 2 | Providing and applying white cement based putty of average thickness 1 mm ot approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per S.O.R. 30 S.I. 13.80 chp 15. |
| 3 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work (1st quality (Royal, silk) Asian, berger) as per S.O.R 24 S.I. 13.60.1 Chp 15. |
| 4 | Finishing walls with Acrylic Smooth exterior paint of required shade: Old work (Two or more coat applied @1.67 Itr/10 sqm) on existing cement paint surface (ace Adv. walmasta) Asian, berger) as per S.O.R chp 15 S.I. 25 (14.66.1). |
| 5 | Scraping old white colour wash including disposal of trefuse as directed by engineer in charge with in a distance of 60m as per S.O.R. chp 17 S.I. 08 (708). |
| 6 | Cement concrete flooring 40mm with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement,complete with 20mm nominal size stone aggregate as per S.O.R. chp 14 S.I. 4(605) . |
| 7 | Providing & laying Cement concrete 1:2:4 (1 cement: 2 coarse sand 4 graded stone aggregate 20 mm nominal size) in pavements, laid to required slope and camber in panels as required including complete as per S.O.R. 4(279B)chp 05. |
| 8 | Providing & applying ferroconcrete as waterproofing treatment as per attached analysis. |
| 9 | First Class brick work in 1: 4 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T & Pete. required for proper completion of the work as per S.O.R.3(305b) chp 06. |
| 10 | Providing and laying Vitrified tiles 600 x 600mm in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily as per D.S.R. 11.41A.1.1 p.g. no.194. |
| 11 | Providing and laying Vitrified tiles in 500 x 500mm (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete as per D.S.R.11.46.1 p.g. no. 195. |
| 12 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete as per D.S.R.11.37 p.g. no.193. |
| 13 | Painting & varnishing old iron/wood with two coat of synthetic varnish paint of approved brand & manufacture of rewuired colour to give an even shade as per S.O.R. chp 15 S.I. 2(642) + S.I. 3(643) . |
| 14 | Renewing glass panes with float glass panes of nominal thickness 4mm weight not less than 10kg/sqm with putty & nails wherever necessary including racking out the old putty as per D.S.R. 14.5.1 p.g. no. 229. |
| 15 | Supply & fixing of flush door commercial quality confirming to IS.2202 part 1 including fixing of wooden cleats & adjustment of hinges, bolts,locks, handles, springs,fitting with necessary screws as per S.O.R. chp 09 S.I. 1(470 b). |
| 16 | Providing and fixing 25mm Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1:00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc. as per D.S.R 18.8.3 p.g. no. 281. |
| 17 | Providing and fixing 20mm Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1:00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc. as per D.S.R 18.8.2 p.g. no. 281. |
| 18 | Providing and fixing 15mm Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1:00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc. as per D.S.R 18.8.1 p.g. no. 281. |
| 19 | Providing and fixing water closet squatting pan 580 x 440mm (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required as per D.S.R 17.1.1 P.g. no.265. |
| 20 | Providing and fixing wash basin 550 x 400mm with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require as per D.S.R 17.7.3 p.g no. 266. |
| 21 | Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards & weighing not less tha 690 gms as per S.O.R. chp 21 S.I. 52. |
| 22 | Excavation in foundations in ordinary soil (Leam clay or sand) including lift upto 1.5m. (5fts.) and lead upto 30m. (100fts.) & including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-incharges upto a distance of 30m. (100 fts: from the foundation trenches as per S.O.R. chp 04 S.I. 1(251) |
| 23 | Providing and laying Cement concrete 1:4:8 (1 cement: 4 coarse sand: 8 graded stones ballay 40 mm. nominal size) including supply of all materials, labour and T & P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation as per S.O.R. 3 279(a) chp 05. |
| 24 | R.C.C. work with cement approved coarse sand and 2 em. (3/4\\") gauge approved stone ballast in the proportion of 1:2:4 in raft foundation excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.1. binding wire and including necessary centering and shutteringe ete. and also including supply of all materials, labour and T&P ete, required for proper completion of the work. Binding wire cost being included in the item as per S.O.R. chp 05 S.I. 12(287). |
| 25 | R.C.C. work with cement approved coarse sand and 2 em. (3/4\\") gauge approved stone ballast in the proportion of 1:1.5:3 in column excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.1. binding wire and including necessary centering and shutteringe ete. and also including supply of all materials, labour and T&P ete, required for proper completion of the work. Binding wire cost being included in the item as per S.O.R. chp 05 S.I. 14(289). |
| 26 | Providing & laying R.C.C. work with cement approved coarse sand 20mm gauge approved stone ballast in proportion of 1:2:4 in plinth beam including supply of all material,labour t & p etc required for proper completion of work as per S.O.R. S.I. 10 (285) chp 05. |
| 27 | Providing & laying R.C.C. work with cement approved coarse sand 20mm gauge approved stone ballast in proportion of 1:2:4 in lintel of floors & windows including supply of material,labour t & p etc required for proper completion of work as per S.O.R. chp 05 S.I. 9(284). |
| 28 | Mild Steel or iron Work in Plain work such as reinforced concrete or reinforced Brick work Wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage & over laping & hooks as per S.O.R. 504(b). |
| 29 | M.150 class brick work in cement & Course Sand in 1:4 in Super Structure including necessary cutting and moulding of bricks as required and also including Honey comb Bricks including supply of all material, labour t&p Etc. required for proper Completion of the work. S.I. No. 3(305b)+309+310 chp 06. |
| 30 | Finishing walls with Acrylic Smooth exterior paint of required shade: Old work (Two or more coat applied @1.67 Itr/10 sqm) on existing cement paint surface (ace Adv. walmasta) Asian, berger) as per S.O.R chp 15 S.I. 22 (13.46.1). |
| 31 | P/L R.C.C. work with cement approved coarse sand 20mm. (3/4\\") gauge approved stone ballast proportion 1:2:4 in Lintle of Floors And Windows including supply of all material, labour t&p Etc. required for proper Completion of the work. S.I. No.288 |
| 32 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete as per D.S.R.11.37 p.g. no.193. |
| 33 | Providing and fixing 20mm Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1:00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc. as per D.S.R 18.8.2 p.g. no. 281. |
| 34 | Providing & placing on terrace polyethylene water storage tank with cover & suitable locking arrangement & making necessary holes for inlet, outlet & overflow pipes but without fittings & the base support of tank as per S.O.R. S.I. 02 chp 19. |
| 35 | Mild steel or iron work of small sizes and section such as holding down bolts, hold fasts, tie, rods, gratings etc. (when not included in an over all rates) wrought to required form. including supply of steel, bolts, nuts and wastage etc. and their fixing required for proper completion of the work as per S.O.R chp 10 S.I. 2(502). |
| 36 | Providing & fixing 80mm G.I. pipes complete with G.I. fittings including trenching & refilling etc as per D.S.R. 18.12.8 P.g. no.282. |
| 37 | Providing & fixing 50mm G.I. pipes complete with G.I. fittings including trenching & refilling etc as per D.S.R. 18.12.6 P.g. no.282. |
| 38 | Providing & fixing gun metal gate valve with C.I. wheel of approved quality for 80mm nominal bore as per D.S.R. 18.17.6 p.g.no.283 . |
| 39 | Providing & fixing gun metal gate valve with C.I. wheel of approved quality for 50mm nominal bore 18.17.4 p.g. no. 282. |
| 40 | Construction of main hole chamber of size 60x60x75 complete as per D.S.R. 18.33 p.g. no.286. |
| 41 | Making connection of G.I. distribution branch with 80mm to 50mm nominal bore by providing & fixing tee, including cutting & threading the pipe etc complete as per D.S.R. 18.13.2 p.g. no. 282. Please Enable Macros to View BoQ information |
