|
| 1 | Demolition of RCC/Concrete of any description and in any position not otherwise specifically provided for |
| 2 | S&F in Soft closing ball bearing telescopic channel of size 22 inch long fixed with screws in cupboards incl all fittings complete all as spd and directed by Engr in charge.Note : Runner/ Channel should be SS 304 grade and load capacity should not be less than 45 kgs |
| 3 | “S&F Modular Cabinet Kitchen accessories of Stainless Steel grade-304,6mm size rod thickness including :-(i) Perforated Cutlery basket, (ii) Grain trolley, (iii) Thali basket, (iv) Cup & saucer basket, (v) Glass basket, (vi) Plate basket, (vii) Premium magic corner (viii) Oil Pull out Tray ( Triple basket layer) of size as per site requirement all spd and directed by Engr in charge |
| 4 | S&F 40mm dia and 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts, screw and washer of mild steel bright finished, complete all as specified. |
| 5 | S&F 18/19mm thick factory made PVC moulded solid board one side pre-laminated/white for cabinet boxes, crockery almirahs, books shelves etc with self and shutter full size fitted under/above the kitchen cooking platform and other rooms directed incl provn of fixing arrangement etc, complete all as specified and directed. |
| 6 | S&F 75 mm long L Bihari concealed type hydrauilc hinges incl stainless screw complete all as specified. |
| 7 | M & L for 18-20 mm thick Black Granite stone work (table rubbed and polished) over and including15mm thick Screed bed or bedding layer in CM 1:4, as in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,front and side of slab moulded and polished including dismantling the existing stone slab with screed/ backing , complete all as specified and as directed by the Engineer-in-Charge.Note- The cost of making hole for Gas pipe in cooking plateform is included in unit cost of item and nothing extra shall be paid on this account. |
| 8 | S&F in repair 15mm dia GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors, pipes should be painted with bituminous paint of approved quality complete all as specified and directed |
| 9 | S&F in repair 20mm dia GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete, all as specified. |
| 10 | S&F sinks made of stainless steel 1mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and directed. |
| 11 | S&F in repairs vitreous chinaware wash hand basin flat back with full pedestal of size 550mm x 400mm complete including, CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Engr in charge. |
| 12 | S&F in repair fancy type chromium plated quarter turn brass angle valve type suitable for 15mm bore pipe complete all as specified |
| 13 | S&F in repair fancy type 15mm dia brass chromium plated quarter turn basin mixer with braided hose for mixing hot and cold water screwed down for iron pipe and fixed to WHB complete all as specified. |
| 14 | S&F in repair PVC connection pipe of 15mm x 600mm long with 2 Nos brass check nuts with washers, complete all as specified. |
| 15 | M & L for reinforced cement concrete 1 :2:4 type B-I nominal mix design for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 16 | Supply and fix TMT bars,6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified. |
| 17 | M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick for finish surface (Horizontal or sloping) complete all as specified. |
| 18 | M&L for coloured glazed ceramic tiles 300x600 x 7 to 8mm thick as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 including demolition of existing old tiles complete all as specified and directed. |
| 19 | Dismantling boarding , any description, fixed in any position with screws complete all as specified |
| 20 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, all as specified. |
| 21 | M&L for coloured ceramic tiles (Non skid) of size 300x300x 6 to 7mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm thick screed bed in CM 1:4 complete all as directed. |
| 22 | M&L for coloured ceramic tiles (Non skid) of size 400x400x 6 to 7mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm thick screed bed in CM 1:4 complete all as directed. |
| 23 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as directed. |
| 24 | M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 25 | Taking down carefully copper/aluminium point wiring (light/fan/ socket/power) complete from the wall by cutting/ chasing including fittings and fixtures such as switches, ceiling roses, pendants holder, regulators,sockets,light fittings etc for credit and making good the disturbed surfaces of wall, floor etc complete all as specified and directed. |
| 26 | Taking down carefully sub main wiring of any description. |
| 27 | Disconnecting elect connection and taking down of Exhaust fan of any make and any height, dismantling blade and removing fan alongwith blade for depositing in MES store yard complete all as specified and directed by Engr- in- Charge. |
| 28 | Taking out unsv winding of exhaust fan and M&L for rewinding of Exhaust fan 225/300 mm sweep any make and type with super enamelled copper winding wire,wraping insulating material, insertion and varnishing well including drying complete and testing of the exhaust fan after refixing in position to the entire satisfaction of Engr-in-Charge. |
| 29 | M&L for Painting of Exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. |
| 30 | M & L for Point wiring (concealed) complete with 1.5 sqmm single core PVC insulated FRLSH unsheathed cable 1100 volts grade (ISI marked) with multi stranded copper conductor drawn through in and including non metallic medium grade rigid PVC conduit, ISI marked not less than 20 mm dia including all accessories concealed in wall by cutting chases and including provision of 1.5 sqmm PVC insulated copper cable FRLSH unsheathed as earth continuty conductor including factory made not less than 1.2 mm thick sunken modular flush sheet galvanised metal enclosure with zinc coating concealed in walls, with suitable modular inner and outer plate sheet with brass/chromium plated screws and cup washers for housing switches , socket out let and fan regulators etc, complete all as specified and as directed for the followings:- |
| 31 | One light /Ceiling fan/exhaust fan point controlled by one, one way switch . |
| 32 | One bell point controlled by one bell push. |
| 33 | One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board. |
| 34 | All as per item No 30 herein before but with 2.5 Sqmm cable for one 3 pin 15 Amp switch socket outlet and using 2.5 sqmm PVC single core copper conductor cable multistranded as earth wire complete all as specified and directed. Note for Item 6 & 7 : (i) In case the wiring is encountered with any beam/column, then the wiring will run on PVC casing&caping/Existing conduit to avoid any damage to the RCC portion. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling fan point wiring, in this specified portion wires shall run through the surface new conduit shall be provided as mentioned in note (i) above.(iii) Proper colour code will be used for wiring as per the electrical rule and as directed by EIC. |
| 35 | M&L switch Modular type 6 Amps 230V AC complete all as specified. |
| 36 | M&L Modular socket outlet 5 pin 6 Amp socket 2 module complete all as specified. |
| 37 | M&L switch bell push Modular type 6 Amps 1W-1 module, 230V AC complete all as specified. |
| 38 | M&L switch Modular type 16 Amps 230V AC complete all as specified. |
| 39 | M&L Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified. |
| 40 | S&F ceiling rose, PVC / Polycarbonate, isolated body with three terminals. |
| 41 | M&L bell electric (ding dong) 230 volt, SP all as specified and directed. |
| 42 | S&F of LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts with lifetime of 25000 burning hours with Power Factor > 0.9, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 140 to 270 Volts AC, temperature range 0 to 50 Degree C, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified. |
| 43 | S&F decorative type wall mounted luminaire (comet type) with unbreakable poly carbonate materials with 1x14 watt LED bulb B22 Base, complete all as directed. |
| 44 | S&F LED 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with , Power Factor > 0.90, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficacy > 70 %, THD<10%, CRI>80, Color Temperature-5700K, Surge protection of 2.5 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed complete all as specified. Please Enable Macros to View BoQ information |
| 45 | S&F LED 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with , Power Factor > 0.90, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficacy > 70 %, THD<10%, CRI>80, Color Temperature-5700K, Surge protection of 2.5 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed complete all as specified. Please Enable Macros to View BoQ information |
