Tender For Special Repair To Building No P-06 (04 X Or Qtr) At Mh Yol Under Age B/R-Ii At Mil Stn Yol
Tender Value
24.57 Lakhs
Estimated cost
Bid Submission
11 Jul 2026
0 days left
EMD
49140
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
YOL CANTT → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No P-06 (04 X Or Qtr) At Mh Yol Under Age B/R-Ii At Mil Stn Yol
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-Jun-2026 | Corrigendum1 | Other | 04-Jul-2026 |
| 2 | 04-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 2 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 3 | Demolition of brick/stone work built in cement mortar including all quoins, arches, pillar including coping etc., complete all as specified and directed |
| 4 | Dismantling timber scantlings 40 sqcm and over in section, in any position framed or unframed work etc, complete all as specified and as direceted by Engr-in-Charge. |
| 5 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 6 | Taking down chowkats or frames with shutters n.exc 1.50sqm each (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge. |
| 7 | Taking down chowkats or frames with shuttersexc 1.50sqm but n exc 4.00 Sqm each (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Char |
| 8 | Demolition of cement concrete (un-reinforced) in ground floor and pavings n. exc 15cm thickness (below or above ground level) all as specified and directed. |
| 9 | Supply & fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall with two corrugations side lap, fixed with self tapping screws complete all as specified and directed. |
| 10 | Supply & fixing Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 11 | S&F false ceiling of Non asbestos fibre cement building boards (E classic board), manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 600 mm x 600 mm x 4 mm thick fixed over and including anodised aluminium powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 600mm X 600mm . The aluminium fram work will supported on side wall with the used of aluminium 'L' section of size 25 mm x 25 mm x 1.5 angles etc. Snap grid shall be supported with hangers of 4 mm dia Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long including dismantling of Old existing false ceiling any type and any description complete all as specified directed by the Engineer-in-Charge. Make : Everest or equivalent as approved by GE |
| 12 | Material & Labour for glazed coloured ceramic jointfree tiles of 450 x 300 x 7mm / 450x350x7mm thick fixed on verticle surfaces, set and jointed in neat cement slurry and pointed in white and coloured cement to match, incl 10mm thick rendering in CM 1:4 on fair & other faces of brickwork, conc or stone work complete all as specified and directed by Engineer-in-Charge. |
| 13 | Material & Labour for coloured non skid cermic jointfree tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 14 | Material & Labour for coloured non skid cermic jointfree tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 15 | Material & Labour for coloured non skid cermic jointfree tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, as in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10mm thick backing in CM 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 16 | M&L for 25mm thick Cement concrete type B-1, 1:2:4 (20 mm graded crushed stone aggregate) complete all as specified and directed by Engineer in Charge. |
| 17 | Material & Labourfor 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and duly machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry including cutting and polishing including 15 mm thick screed bed layer of cement mortar 1:4 including pointing is white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.”Note : The granite slab shall be fixed one piece, No joint shall be provided on slab except the situation where L-shaped slab is required. Contractor shall note this requirement while quoting his bid. |
| 18 | Rounding to edges of stone/kota/marble/granite slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engineer in Charge. |
| 19 | M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 20 | Rolled mild steel work in main and cross beams, hip and jack rafters, purlin where connected to common rafter and similar work with Fe 410 W (Gde E-250) quality 'A', Complete all as specified and directed |
| 21 | Material & Labour for nominal mix RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in slab supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves lintel/roof band and the like complete including necessary formwork complete all as specified and directed by Engineer-in-Charge. |
| 22 | MS TMT bars 10mm dia and over cut to length,bent to shape required including cutting, cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed. |
| 23 | Taking up or down 15mm dia steel tubing and connections from wall / ceiling or laid floors complete all as specified and directed Engineer-in-Charge. |
| 24 | Taking up or down 20mm dia steel tubing and connections from wall / ceiling or laid floors complete all as specified and directed by Engineer-in-Charge. |
| 25 | Supply & fixing 15mm bore medium grade glavanised tubes with all fittings and fixed complete to walls etc, incl cutting chases for concealed water tubing or concealed conduit wiring,etc. in brick / stone masonry complete all as specified and directed by Engineer-in-Charge |
| 26 | Supply & fixing 20mm bore medium grade glavanised tubes with all fittings and fixed complete to walls etc, incl cutting chases for concealed water tubing or concealed conduit wiring,etc. in brick / stone masonry complete all as specified and directed by Engineer-in-Charge |
| 27 | Supply & fixing 32mm bore medium grade glavanised tubes with all fittings and fixed complete to walls etc complete all as specified and directed by Engineer-in-Charge. |
| 28 | Supply & fixing in repairs stainless steel sinks with drainage board made of 1mm thick for kitchen with plugs, washer, waste pipes, cast iron cantilever brackets, connecting union to pipe of overall size 915mm x 460mm, bowl size 410 x330 x 160mm with glossy finish,waste coupling 32 mm bore of discharge pipe including bedding in cement mortar to dwarf wall fixing cantilever brackets and connecting unions to pipe complete all as specified and directed by Engineer-in-Charge |
| 29 | Supply & fixing in repair chromium plated shower rose 125mm size complete all as specified and directed by Engineer-in-Charge |
| 30 | Supply & fixing in repair Vitreous China wash down water closet pan with 'P' trap (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc.complete all as specified and directed by Engineer-in-Charge. |
| 31 | S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-Charge. |
| 32 | S&F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-Charge |
| 33 | Supply & Fixing in repairs for 10 ltr capacity PVC valveless syphonic action type duel flushing cistern, low level white with inlet ball valve float and handle incl brackets complete all as specified and directed by Engineer-in-Charge |
| 34 | Supply & Fixing in repairs for vitreous china wash hand basin white flat back, (size 450x300mm) or corner wash basin as per site requirement incl brackets, cutting for and pinning in ends or brackets withwaste coupling of PTMT bore of 32 mm dia discharge pipe (half or full threaded) minimum wt 32 mm (45 gms/40-60 gms) complete all as specified and directed by Engineer-in-Charge |
| 35 | Supply & fixing in repair Brass CP mixer (center hole mixer/ wall mixer/ sink mixer ) for mixing hot & cold water screwed down for iron pipe and and fixed to 15mm dia pipe complete all as specified and directed by Engineer-in-Charge. |
| 36 | Supply & fixing in repairs tubular towel rail brass chromium plated, 20mm dia, D type 60 cm long fixed between flanges by Engineer-in-Charge. |
| 37 | Supply & fixing 600x450mm bevelled edge mirror of selected guantity glass, moulded on 6mm thick AC building board or commercial plywood and fixed to wooden pluges with cromium plated srews and cup washers complete all as specified and directed by Engineer-in-Charge |
| 38 | Supply & fixing CP soap dish 150mm size complete all as specified and directed by Engineer-in-Charge |
| 39 | Supply & fixing Sheet glass shelf assembly consisting of 5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed by Engineer-in-Charge. |
| 40 | Supply & fixing in repair 15mm bore dia of stop valves/AngleValve (one way/ two way) concealed type if required , fancy type, chromium plated with long shank and cup (concealed type) screwed down high presure, screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge. |
| 41 | Supply & fixing in repair bib taps 15mm bore, fancy type chromium plated with butterfly handle, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge. |
| 42 | Supply & fixing in repairs harrison rails, stainless steel, with fixing brackets, stops, rollers etc., complete all as specified and directed. |
| 43 | S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches of bore 110 mm , in repairs, complete all as specified. |
| 44 | S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in walls of bore 110 mm , laid in repairs, complete all as specified. |
| 45 | S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in walls of bore 75 mm , laid in repairs, complete all as specified. |
| 46 | S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches of bore 75 mm , laid in repairs, complete all as specified. |
| 47 | S&F for PVC (SWR) junction single (Single T) equal or unequal, 75 mm bore provided with oval access door, fixed in repairs, complete all as specified. |
| 48 | S&F for PVC (SWR) bend any radius with access door, 110 mm bore, fixed in repairs, complete all as specified. |
| 49 | S&F for PVC (SWR) junction single (Single T) equal or unequal, 110 mm bore provided with oval access door, fixed in repairs, complete all as specified. |
| 50 | S&F in repair for PVC (SWR) bend any radius with access door, 75 mm bore, fixed in repairs, complete all as specified. |
| 51 | S&F for 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement |
| 52 | S&F for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement including chamber of PCC 1:2:4 of size 300x300x300 mm including precast cement concrete cover complete all as specified. |
| 53 | Supply & fixing rotational moulded polyethylene water storage tank ( cylindrical vertical with closed top) hoisted and fixed in position of 500 liters capacity confirming to IS specification,incl dismantling of water tank complete all as specified and directed by Engineer-in-Charge. |
| 54 | Supply & fixing in repair 20 mm dia ball valves, high pressure of epoxy coated aluminium rod and high density plastic ball complete screwed for iron pipes or brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge. |
| 55 | Supply & fixing in repairs 20mm bore gun metal globe or gate valve cast copper alloy, screwed down, high pressure with cruth or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed by Engineer-in-Charge. |
| 56 | Supply & fixing in repairs 15mm bore gun metal globe or gate valve cast copper alloy, screwed down, high pressure with cruth or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed by Engineer-in-Charge. |
| 57 | Supply & fixing pressed steel frames for doors of size 125mmx60mm, 1.25mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, & as directed by Engineer-in-Charge. |
| 58 | Supply & fixing 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, both face is covered with decorative face veneer with lipping/frame to match commercial type on both sides all as specified and as directed by Engr-in-Charge. |
| 59 | Supply & fixing 35mm thick , 2nd class hard wood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge. |
| 60 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. all as specified and directed by Engineer-in-Charge. |
| 61 | S&F for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. |
| 62 | Supply & fixing Box Type Steel window 1.25mm thick box type (Primer Coated) ERW hollow P section of size 60mm x 25mm double rebated comprises gauged & glazed skelton shutter ERW sec 50mm x 20mm and 1mm thic with one or two openable leaf as directed consiting two Nos sash bar of T-Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 30mm x 25mm and 1.25mm thick including coutting holes and making good dismantled portion in PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate, four Nos for each window including following fitting welded to frame shutter.(i) Hold fast, 150mm long of 12mm x 3mm made to shape-04 Nos per window.(ii) Handle of Z sec 20mm x 25mm, 100mm long-1 No Per. Leaf.(iii) MS tower bolt 150mm long-2 No per leaf(iv) Z Sec 20mm x 25mm, 100mm long stopper-1 No per leaf.(v) Cleat 65mm long of hollow square 15mm x 20mm x 63mm weldeg to hinge-1 No per leaf.(vi) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf. (vii) Fabrication & fixing arrangement as per drg No. CEPZ TD-26/13(viii) 10mm Sq bar arrangement as grill (ref TD) included in this item . |
| 63 | Supply & fixing for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples all as specified & as directed by Engineer-in-Charge. |
| 64 | Supply & fixing for 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n,exc 0.50 Sqm in each pane |
| 65 | Supply & fixing for 3mm thick frosted sheet glass, ordinary quality and glazing with oil putty in square n,exc 0.50 Sqm in each pane |
| 66 | Supply & fixing 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each complete all as specified and directed. |
| 67 | Supply & fixing for MS butt hinges 100mm size, medium weight complete all as specified and directed. |
| 68 | Supply & fixing for 200mm length aluminum, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 69 | Supply & fixing for 150mm long aluminum, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 70 | Supply & fixing 150mm long aluminium handles, cast type anodised complete all as specified and directed. |
| 71 | Supply & fixing 125mm long aluminium handles, cast type anodised complete all as specified and directed. |
| 72 | Supply & fixing aluminium alloy, anoised sliding door bolt 300mm, with hasp staple and fixing clips of sheets cast or extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 73 | Dismantling boarding, any description fixed in any position with nails complete all as specified and directed. |
| 74 | Material & Labour for 16-18mm thick HDHMR (High density high moisture resistance) board ,exterior grade,prelaminated one side with decorative choice lamination and other side balancing white lamination,fixed with screws to timber frame work complete all as specified and directed. |
| 75 | Material & Labour for clean sawn 2nd class hardwood in scantlings Complete all as specified and directed. |
| 76 | Supply & fixing continuous (piano) hinges mild steel, bright finish or electrogalvanised width of flaps 40mm ( when open) complete all as specified and directed. |
| 77 | Supply & fixing Steel plate rack of over all size 600mmx600mmx250mm made of stainless steel having thickness 1mm, fixed over fixing 40cm long MS angle of size 25mmx25mmx3mm- 02 Nos each on walls, complete all as specified and directed. |
| 78 | Providing and laying of water proofing treatment to sunken floor portion including vertical portion by applying cement slurry mixed with acrylic based polymer modified cementenious composite compound of make as specified and including demolition and PCC 1:2:4 type B1( 20mm graded crushed stone aggregate) as subbase, sides of rounded or chamfered on edges of sunken slab and PCC 1:5:10 type E2 (Using 40mm graded aggregate) for filling of sunken floor after treatment. (a) First layer of cement slurry of cement @ 0.488 kg/Sqm mixed with acrylic based primer modified cementtenious composite compound @ 0.253 kg/Sqm. this layer allowed to air cure for 4 hrs. (b) Second layer of cement slurry of cement @ 0.242 kg/Sqm mixed with acrylic based modified cementenious composite compound @ 0.125 kg/Sqm. this layer allowed to aircure for 4hours. (c) the slope shall be 1 in 20 towards first corner of outer wall and GI pipe of dia 50mm (Med grade ) be inserted at corner projecting outside 20cm. (d) 15mm thick plaster in CM 1:3 mixed with WPC to be provided while concrete is in green state. (e) Joints of traps/ WC/ Soil pipes shall be properly sealed with sealing compound. Note : Concrete for sunken slabs shall be mixed with WPC as manufacturers instruction before carrying out water proofing treatment the sunkenslab shall be tested with water for 48 hrs for any leakage/ dampness seen in ceiling below, then treatment is carried out to RCC slab and it is again tested before passing for next stage. Note:- Rate of water Proofing compound shall be included and shall not be paid seperately. |
| 79 | Water proofing treatment of roof portion (Below water tank area) with 75mm thick (average) PCC 1:2:4 (using 12.5mm graded crushed stone aggregate) in order to maintain proper slope and base over existing roof surface, surfaces finished even and smooth without using extra cement for laying of BTD , mixed with water proofing compound as per manufacturer instructions using shaliurethane-BTD of STP make or equivalent mentioned in Appendix 'C' high solid content component Water basedliquid applied elastometric water proofing membrane as ASTMC 836 and ASTMD 6083, thickness of the membrane shall be 2.00 mm having solid content of more than 80 % elongation of 500 + (-) 50 % laid over reinforcing layer on non woven geotextile mesh of 40/50 gms including applying self primer coat by diluting with 1:1 ratio @ 0.20 Kg per square metre and surface preparation, complete all as per manufacturer's instructions/ specifications and as directed. |
| 80 | Material & Labour for PCC M-15 ( Nominal mix) 75 mm thick, using 20mm graded crushed stone aggregate as in paving, plinth protection etc, surfaces finished even and smoothwithout using extra cement and dividing into panells not exc 1.20 Mtr all as specified and directed. |
| 81 | Taking down cement plaster on brick walls etc, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.. |
| 82 | Rendering 15 mm thick on fair faces of brick/stone or concrete surfaces in CM 1:6 and finished surface even and smooth without using extra cement (Internal surfaces) complete all as specified and directed by Engineer in Charge. |
| 83 | Rendering 15 mm thick on fair faces of brick/stone or concrete surfaces in CM 1:4 and finished surface even and smooth without using extra cement (Internal surfaces) complete all as specified and directed by Engineer in Charge. |
| 84 | Material & Labour for rendering 5mm thick in cement mortar 1:3 on fair faces of RCC surfaces including applying cement slurry in bottom of slab or ceiling, chajjas, fin etc complete all as specified and directed. |
| 85 | Preparation of newly plastered surface of walls and applying two coats of oil bound distemper over 2 mm wall putty to achieve smooth surface complete all as specified and directed. |
| 86 | Material & Labour for preparation and complete removal of old plastered surface of walls and applying two coats of oil bound distemper over 2 mm wall putty to achieve smooth surface complete all as specified and directed. |
| 87 | Material & Labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 88 | Material & Labour for preparation of old plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 89 | Material and Labour for exterior painting work including complete preparation of newly/ Old Plastered Surface plastered surface and crack filling with crack seal upto 3mm where required and making good/smooth the surface with wall putty with silicon additives and sanding these surface for removal of loose particles and applying one coat of Smart Care waterproof primer (Damp Prime Suprema) on walls and chajjas with 10% of dilution of water and applying two coats of 100% acrylic smooth emulsion exterior grade with silicon additives and anti-algal properties (Apex Ultima Suprema). complete all as specified and directed.Note: The above specification of work for exterior painting is guaranteed as per manufacturer Performance Warranty and to be executed only by applicator authorised by original equipment manufacturer Make: \\"ASIAN PAINTS/BERGER/NEROLAC\\" |
| 90 | Material and Labour for waterproofing of exterior walls, include complete removal of existing plaster including raking out joints and applying two coats of acrylic polymer modified high performance coating (Smart care Ultra Block 2k). The treatment shall be done from ground level and providing 25mm thick cement plaster in CM 1:4 finished even and smooth. Note: The above specification of work for exterior painting is guaranteed as per manufacturer Performance Warranty and to be executed only by applicator authorised by original equipment manufacturer Make: \\"ASIAN PAINTS/BERGER/NEROLAC\\" |
| 91 | Material & Labour for applying two coats of synthetic enamel paint over one coat of pink primer on newly prepared wooden surfaces of any description, not otherwise described over 10cm width or girth complete all as specified and directed by Engineer in Charge. |
| 92 | Material & Labour for two coats of synthetic enamel paint over one coat of red oxide exc 10cm width or girth on newly prepared steel surfaces complete all as specified and directed by Engineer in Charge. |
| 93 | Machine cut kota stone slab flooring 18-20mm thick over screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and incl 15mm thick screed bed in CM 1:4 complete all as specified and directed |
| 94 | Material & Labour for kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed including 10mm cement screed plaster in CM 1:4 complete all as specified and directed. (Note:- The kota stone on treads & risers shall be fixed in one piece only. No joints shall be provided. Contractor shall keep this aspect while quoting his rates). |
| 95 | M&L for PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate as in surface channels & drain including use of form work complete all as specified and directed. |
| 96 | M&L extra for forming fair finished drain or channel any girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc complete all as specified and directed by Engineer in Charge. |
| 97 | Cutting into existing manholes for connecting new drains, 150mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round 3/4 channel) in cement concrete M-15 type B-1 using 20mm graded crushed stone aggregate finished smooth and reforming benching as required complete all as specified and directed by Engineer in Charge. |
| 98 | Earth work in excavation by mechanical means Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift upto 3m, including getting out in all kind of soil excavated soil and disposal of surplus excavated soil, within a lead of 50m complete all as specified and directed. |
| 99 | M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed. |
| 100 | Returning Filling in soil including spredaing, levelling, watering & well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed by Engineer in Charge |
| 101 | Material & Labour for pre cast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) in pre cast deck slabs, shelves, cover to man holes, etc and similar works bedded and jointed in cement mortar 1:4 including use of form work complete all as specified and directed by Engineer in Charge. |
| 102 | M&L PCC(1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in coping/benching rounded chamfered angles and throating including use of form work complete all as specified and directed by Engineer in Charge. |
| 103 | Demolition and breaking up 150mm dia, drain pipes (PVC, Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar any size and in any position including all fitting complete all as specified and directed by Engineer in Charge. |
| 104 | M&L reinforced concrete pipes 150mm bore, class NP3, laid and jointed complete with collars complete all as specified and directed by Engineer in Charge. |
| 105 | S&F in repair With magnet catcher with magnet of any size for cupboards complete all as specified and directed. |
| 106 | M&L for cement concrete 1:4:8 type D-2, using 20mm graded crushed stone aggregate as in concrete bed to drain pipes including packing under and completely surrounding pipes of 150mm bore with concrete after they are laid and tested in complete all as specified and directed by Engineer in Charge |
| 107 | Taking down point wiring with aluminium/ copper conductor for light point, fan & socket point/ power point etc. complete including switches, sockets, holders, (batten or pendent type), ceiling rose, switch board, bell/buzzer, bell push, and making good to the disturbed surfaces of wall/ floor etc. to match with existing surfaces including white wash/ colour wash/ distempering to match with existing wall/ floor/ ceiling finishes, complete all as specified and directed. |
| 108 | Taking down sheet metal enclosure DB, MCB, main switch etc and making good distrubed surfaces to match with existing surfaces, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 109 | Taking down sheet metal enclosure DB, MCB, main switch etc and making good distrubed surfaces to match with existing surfaces, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 04, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 11, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender