Tender For Special Repair To Building No Wb-133 (Or Md Accn) At Mcte Under Ge (Mcte) Mhow
Tender Value
48.53 Lakhs
Estimated cost
Bid Submission
07 Jul 2026
2 days left
EMD
97060
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
GE (MCTE) Mhow → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No Wb-133 (Or Md Accn) At Mcte Under Ge (Mcte) Mhow
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed. |
| 2 | M&L for double charged Virified Ceramic tiles 8-10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 3 | M&L for double charged Virified Ceramic tiles 8-10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 4 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 5 | M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 300 x 450 x 7 to 8mm thick in vertical surfaces, as in dado/ skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 6 | Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land complete all as specified and directed. |
| 7 | M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 8 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 9 | All as per Srl item No. 08.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 10 | M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/ rounding) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 11 | Taking down chowkats of any description without taking of shutter from the frame exceeding 1.5 sqm but not exc. 4.0 sqm each complete all as specified and directed. |
| 12 | Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed. |
| 13 | Taking down Shutters of any description exc. 1 sqm but n. exc 2 sqm each of any description complete all as specified and directed. |
| 14 | S&F Pressed steel door frame for single door, size 105 x 60mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfast (size 25mm x 3mm of length 30 cm) etc. complete all as specified and directed. |
| 15 | S&F Pressed steel door frame for single door, size 125 x 60mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfasts (size 25mm x 3mm of length 30 cm) etc. complete all as specified and directed. |
| 16 | M&L for PCC 1:2:4 type B0 (12.5mm graded) aggregate for filling in pressed steel door framed complete all as specified and directed. |
| 17 | S&F for 1st cass hardwood decorative door, framed, panelled shutters 35mm thick (any number of panels), with panels of timber of approved design and shape (feather edged), supplied and fitted to chowkats including french polish complete all as specified and directed. |
| 18 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid DECORATIVE TYPE FLUSH DOOR SHUTTER of size 30mm thick comprising of virgin PVC polymer of K value 58-60 (Suspnsion Grade), calcium carbonate and natural fibres (wood powder/ ricehusk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 650 kg/cum, screw withdrawal strenght of 1800 N (Face) & 900 N (Edge), minimum compressive strenght of 50 N/mm sqr, modules o+F63f elasticity 850 N/mm sqr and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ mositure prooof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws complete all as specified and directed. (Note:- stainless steel butt hinges and necessary scews shall be paid seperately. |
| 19 | S&F 35mm thick factory made fly proof door flush shutter both side laminated with 0.90mm thick decorative lamination of approved colour/ shade, with & including stainless steel wire mesh 0.36mm nominal dia with average aperture not less than 1.40mm nominal dia wire, with and including Aluminium decco grill of size 50 x 50mm in opening of wiremesh. The shutter shall be ISI marked as per IS 2202( part 1)-1999, complete all as specified and directed. |
| 20 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, S&F in opening as per specification & drawing complete all as specified and directed. |
| 21 | S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 22 | S&F 150mm size aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 23 | S&F 125mm size aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 24 | S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 25 | S&F 100mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 26 | S&F 150mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed. |
| 27 | S&F 100mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed. |
| 28 | S&F door stopper of aluminium alloy body and tongue 150mm long, anodised fixed in door with screws etc. complete all as specified and directed. |
| 29 | S&F in repairs 150mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 30 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 31 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide complete all as specified and directed. |
| 32 | S&F in repair 25mm bore SS Pipe curtain rods including SS Brackets & SS Decorative dome, suitable for door/ widows curtain with fancy type powder coated SS dooms with ss brackets fitted to each end and fixed to wall incl. removal of existing rod and making good etc. complete all as specified and directed. |
| 33 | S&F in repair stainless steel wire mesh 0.36mm nominal dia with average aperture not less than 1.40mm nominal dia wire complete including necessary Aluminium framing and decco grill all around and as necessary, complete all as specified and directed. |
| 34 | S&F mild steel framed work such as grills, gratings, gates etc with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; angle framed work and similar works complete all as specified and directed. |
| 35 | Providing and fixing pre painted steel sliding window 3-track, 2 glass panel and 1 mesh panel sliding window fabricated from Roll formed sections made of galvanized steel colour coated/ powder coated (Base Steel as per IS 513 'D' quality, galvanized as per IS 277 with zinc of 120 GM/Sqm) with total coated thickness of 0.58mm. Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 507 microns or powder coated with pure polyester powder up to 50-60 microns thick. Section for external frame should be of 107 x 44mm, Section for shutter should be of 35 x 49mm. Section of mesh should be of 35 x 49mm. The windows should be paneled with 5mm thick plain float glass. Corner bracket for internal and external frame made of glass filled nylon. Gaskets are to be made of Ethyl Propylene Diamine monomer (EPDM). The sections are to be cut to length, joined and assembled by means of corner bracket. The above frames should be fixed to the concrete/ masonry walls by means of self expanding screws conforms to IS-513:2008 complete all as specified and directed. |
| 36 | Providing and fixing fixed louvers fabricated from Roll formed sections made of galvanized steel colour coated/powder coated (base steel as per IS 513 'D' quality, galvanized as per IS 277 with zinc of 120 grams/ Sqm) with thickness of 0.58mm coated sections to be primer coat of epoxy primere of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick, section for external frame 33 x 58mm, glass holding flanges made of polypropylene, sections are to be cut to length, mitre joined with corner bracket. The above frames should be fixed to the concrete/ masonry walls by means of self expanding screws conforms to IS - 513:2008 complete all as specified and directed. |
| 37 | S& Fixed in repair Vitreous china, wash down water closet pan Single piece WC with UF seat cover, hinges fixing acessories set cisteren fittings, rim less tornado flushing complete all as specified and directed. |
| 38 | S&F in repairs vitreous china, white, wash hand basin, with pedestal flat back size 550 x 400mm 'including MS brackets including cutting for and pinning, including waste pipe complete all as specified and directed. |
| 39 | S&F in repair 15mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 450mm complete all as specified and directed. |
| 40 | S&F tile drain linear grating size 450mm (4\\" x 18\\") complete all as specified and directed. |
| 41 | S&F in repair 15mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 42 | S&F in repair 15mm dia bib tap swan neck cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 43 | S&F in repair 125mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 44 | S&F in repairs sinks made of stainless steel soundproof 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 45 | S&F in repair chromium plated brass Pillar tap with swan neck without popup waste system complete screwd down for 15mm GI bore pipe complete all as specified and directed. |
| 46 | Taking down damaged any type of bathroom cabinet and S&F New PVC bathroom cabinet of size 450 x 600mm best quality complete all as specified and directed. |
| 47 | S&F in repairs Corner Glass Shelf of Size 320 x 320mm with 12mm thick glass with Silver chromium finished border Oval Range premium quality complete all as specified and directed. |
| 48 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and directed. |
| 49 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re fixing complete all as specified and directed. |
| 50 | Supplying and laying of CPVC pipes 20mm outer dia, SDR 13.5 & Plain CPVC SDR 11 fittings fixed to wall and ceilling or laid in floors complete all as specified and directed. |
| 51 | M&L for cutting, chases, pinning in block masonry wall for concealed water tubing and making good to facing and pointing in CM 1:3, cutting n. exc. 10 cm girth complete all as specified and directed. |
| 52 | Taking up or down 20mm bore steel tubing and connections, including cleaning for re fixing complete all as specified and directed. |
| 53 | Supplying and laying of CPVC pipes 25mm outer dia, SDR 13.5 & Plain CPVC SDR 11 fittings fixed to wall and ceilling or laid in floors complete all as specified and directed. |
| 54 | Dismantling PVC water tanks 1000 litres capacity complete all as specified and directed. |
| 55 | S&F rotational moulded polyethylene water storage tanks of capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I, complete all as specified and directed. |
| 56 | S&F in repairs Stop/ angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed. |
| 57 | S&F in repairs two way Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed. |
| 58 | S&F in repairs Health Faucet ABS with Rubbit Cleaning System, 1.25 m Long PVC Flexible Tube & ABS Wall Hook complete all as specified and directed. |
| 59 | S&F in repair chromium plated brass wall mixer 3-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange without hand & over head Shower screwd down for 15mm GI bore pipe complete all as specified and directed. |
| 60 | S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed. |
| 61 | S&F in repairs 32/ 40mm PVC downpipe for kitchen sink fittled to Kitchen Sink incl all necessary brackets etc. complete all as specified and directed. |
| 62 | S&F in repairs Corner Glass Shelf of Size 320 x 320mm with Silver chromium finished border Oval Range premium quality complete all as specified and directed. |
| 63 | S&F Brass Bottle Trap 300mm (12\\") Designer wall connection pipes and wall flange complete all as specified and directed. |
| 64 | Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed. |
| 65 | M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. |
| 66 | M&L for prepration of new wall surfaces & applying birla/ JK wall care white putty 2mm thick for levelling the surfaces and applying two coat of interior emulsion distemper over a coat of wall primer incl. preparation of surfaces of walls etc. complete all as specified and directed. |
| 67 | M&L for Rendering 10mm thick on fair faces of concrete surface of ceiling, chajja in CM 1:3, surface finished even and surface without using extra cement complete all as specified and directed. |
| 68 | M&L for Preparation of Newly plastered surface and applying three coats of white wash on Ceiling complete all as specified and directed. |
| 69 | M&L for Rendering 15mm thick on fair faces of concrete/ brick exterior surfaces in cement mortar 1:4, finished fair and even without using extra cement complete all as specified and directed. |
| 70 | M&L for Prepration of new surfaces and applying two coats exterior weather coat over one coat of exterior primer over and including 2mm thick wall putty etc complete all as specified and directed. |
| 71 | M&L for complete removal of existing treatment from wall by scrapping of surfaces of old decorated walls etc, and applying Birla/ JK wall care white putty 2mm thick for levelling the surfaces including properly making of 'V' shape crakes and filling of all crakes with crakes seal of walls & applying two coats of exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed. |
| 72 | M&L for complete removal of existing treatment from walls by scrapping & washing etc and applying Birla/ J.K. wall care white putty 2mm thick for levelling the surfaces including properly making of 'V' shape crakes and filling of all crakes with crakes seal of walls and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed. |
| 73 | M&L for preparation of old plaster surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 74 | M&L for applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and directed. |
| 75 | M&L for applying one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and directed. |
| 76 | S&F in repairs 18mm thick factory made PVC sheet one side pre-laminated sheet ktichen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as per specified and directed by Engr-in-Charge manufactures specification. |
| 77 | S&F in repairs factory made PVC shelf/ partition of required size consisting of panel of 18mm thick required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provided 3 edges in size 18mm x 18mm as per required lenght the front side of the edge visible in the front of the shelf/ partition to be edge lipped by 18mm widht x 1mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company, using solvent cement etc. complete all as specified and directed. |
| 78 | M&L for providing PVC WALL PANELLING of 5mm thick consisting of panel of desired size stuck on inner frame work of 50mm wide strips of 5mm thick prelaminated PVC sheet. The panel & strips shall be density of 600 kg/CBM manufactured by ISO-9001-2015 certified company. The strips should have in their centre a gove of 6mm widht and 1mm depth for sinking the head screws used to fix the strip to the wall vertically at an equal interval of 10 inch between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long MS screws through the groove in the strip by using PVC fasteners the distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall optionally a strips of 5mm thick PVC sheets of width 75mm feathered at the edges shall be stuck at the places where two panels are joined using solvent cement complete all as specified and directed. |
| 79 | S&F Brass handles 100mm size, cast type, polished bright as approved by Engr in Charge complete all as specified and directed |
| 80 | S&F self closing stainless steel hinges complete all as specified and directed. |
| 81 | S&F 50 x 15mm size magnet door catcher for closing for PVC door shutter complete all as specified and directed. |
| 82 | S&F modular type stainless steel basket size 0.50 m x 0.53m x 0.10 m (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arrangement complete all as specified and directed. |
| 83 | All as per Srl item No. 82.00 as above but basket size 0.50 m x 0.53 m x 0.15 m complete all as specified and directed. |
| 84 | All as per Srl item No. 82.00 as above but basket size 0.50 m x 0.53 m x 0.21 m complete all as specified and directed. |
| 85 | S&F in repair Ball valves 15mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 86 | S&F in repair PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron cleants etc complete all as specified and directed. |
| 87 | S&F in repair 110mm dia PVC (SWR) pipes single soketed in any length with adhesive joint fixed to floor or trenches including fittings complete all as specified and directed. |
| 88 | Supply and fix in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fix to wall complete all as specified and directed. |
| 89 | S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with solvent joints laid in trenches or in floors with fittings complete all as specified and directed. |
| 90 | S&F in repairs PVC floor trap, including jointing to wast pipe fixed in cement concrete type B1 (1:2:4), in repairs and including waterleak proor treatment complete all as specified and directed. |
| 91 | S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 75mm, complete all as specified and directed. |
| 92 | S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 110mm, complete all as specified and directed. |
| 93 | S&F PVC (SWR) Branch pieces, double (double Y) equal or unequal of pipe 75mm bore complete all as specified and directed. |
| 94 | S&F PVC (SWR) Branch pieces, double (double Y) equal or unequal of pipe 110mm bore complete all as specified and directed. |
| 95 | S&F in repair stainless steel plate racks of size 900mm x 600mm x 250mm and thickness of SS strip 1mm, fixed on wall etc. complete all as specified and directed. |
| 96 | Demolition of cement concrete unreinforced in Ground floor & paving n.exc 15cm thickness and removal of debris from site complete all as specified and directed. |
| 97 | M&L for broken stone or bounders hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a floor/ true surface complete all as specified and directed. |
| 98 | M&L for PCC 75mm thick type B2 (1:2:4) using 40mm graded stone aggregate) in plinth protection, joints should be filled with bitumen primer etc, complete all as specified and directed. |
| 99 | M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in mass concrete as in foundation filling and mass concrete complete all as specified and directed. |
| 100 | M&L for Cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate 25mm thickfinished surface rough to receive tiliing complete all as specified and directed. |
| 101 | Demolition of brick work built in cement mortar in any position and removing rubbish off the premises within 50m complete all as specified and directed. |
| 102 | M&L for Brickwork with subclass 'B' bricks, straright or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed. |
| 103 | M&L for Brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed. |
| 104 | M&L for Providing cement concrete 1:2:4 type BO (using 12.5mm graded stone aggt) as in coping, apex stone, bed plate, kerbs including weathering, slightly rounded or chamferred angles and throating and including necessary form work etc. complete all as specified and directed. |
| 105 | S&F HDPE double wall corrugated sewage pipe, 150mm internal dia, SN-8 as per IS 16908 Part-II 2013 laid in trenches, jointed and tested as per manufacturer's instructions including demolition and breaking up drain pipes (salt glazed ware)/ RCC pipe of 150mm bore pipe set in cement mortar complete all as specified and directed. |
| 106 | M&L for machine pressed precast concrete interlocing paver block any shape and size conforming to IS-15658-2006 of 60mm thickness, M-40 grade laid dry in floor/ path with and including 50mm thick (Compacted thickness) crushed stone sand cushioning complete all as specified and directed. |
| 107 | Dismantling Plain or Corrugated steel sheeting any gauge, thickness including Nainital or similar pattern Roof covering complete all as specified and directed. |
| 108 | Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified and directed |
| 109 | S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 110 | M&L for rolled section/ hollow tube section as in post, main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecction plates including drilling hole for bolting, connecting to gusset plate etc. complete all as specified and directed. |
| 111 | Dismantling fencing wire mesh, any type complete all as specified and directed. |
| 112 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 113 | Supply Chain link MS galvanisd fencing, any size or type etc. complete all as specified and directed. |
| 114 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 115 | S&F 5.5mm to 6.5 thick looking mirror, of selected quality glass fitted to wall with studs as required complete all as specified and directed. |
| 116 | M&L for water proofing treatment to sunken surfaces of the slab in following sequences:- (for 5 Years Gauranty) (a) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. (b) Cleaning : Surface must be clean, dry and in sound condition to ensure adequate adhesion. Clean the application surface with wire brush, water, grinder to create a key as required. Cracks in slab be repaired with polymer modified cement-sand mortar (PMM) mix with SBR Latex URP 10 % by weight of cement. (c) Grouting pipe inserts : Wrapping all pipes inserts with a two-way adhesion tape of Bonding agent and grouting the gaps space with non- shrink grout 10M or PMM prepared by polymer modified mortar with URP in the ratio of 1:3 by adding polymer 10% by weight of the cement. (d) Injection Treatment : Providing and fixing PVC grouting nozzles of 130mm length & 10mm outer dia, with a stopper at the outer end, shall be fixed on the concrete surface @ 1m C/C or at the particular location of water leakage, by drilling a hole of same dia and inserting up to a depth of 80mm. Cement paste mixed with Instant leak Plug shall be used to fix and seal the sides of the nozzle. The Grout shall be prepared with mix of cement & expansive grouting additive in W/C ratio not more than 0.45. The grouting shall be done under pressure of 3 kg / cm2 using grouting pump. (e) Horizontal protection & slpoe : Providing & laying 50mm THK protective screed or of Cement Concrete of 1:1.5:3 mix admixed with integral compound conforming to IS 2645:2003, @ 200ml per bag of cement or Brick Bat Coba in the sunk area, to provide slope to the horizontal surface towards drain outlet and also to protect the waterproofing, keeping the surface broomed, curing and testing for water tightness for 7 days etc. complete (f) Vertical protection : Apply a spatter dash bond coat which comprises of Cement: URP: Silica sand (1:1:1.5) over the cured waterproofing coating and apply the key coat of plaster as wet on wet application. The plaster should be placed approx.12-15mm thick plaster in two coats over the prepared surface of cement sand mortar admixed with integral waterproofing compound forming to IS 2645:2003 @ 200 ml per bag of cement. |
| 117 | M&L for Demolition of ends for damaged portion of chajja/ facia portion scrafying or removing Old loose dirt of cement concrete and removing of Old rusted reinforcement, lathing/ welding of new reinorcement for damaged portion, fixing of 0.71mm dia wire netting of galvanised steel wire of size 12mm mesh fixed with tinned tack of wire stable for damaged portion and applying in CM (1:3) with level plaster for width of facia/ Chajja exc 10mm and n.exc 60mm finished even and smooth without using extra cement and including necessaryuse and waste of form work and concerting with PCC (1:2:4) type B-0 using 25mm graded stone agg mixed with Dr fixit concrete bonding solution as per manufacturer Instruction for required places, height of the bldg up to third floor from the above ground level for work. Widht of Chajja/ facia exc 30 cm but not exc 90 cm complete all as specified and directed. |
| 118 | M&L for RCC 1:2:4 type B-1 (Using 20mm graded crushed stone aggregate) as in Patch work for certain places of Roof slab, facia, Chajja with necessary from work and the height of the bldg up to third floor from the above ground level for work complete all as specified and directed.(Note:- Rate will be include for reiforcement also) |
| 119 | Taking down existing waterproofing treatment of tar felt of any description from roof surfaces and removing rubbilsh to a distance not exc 100mtres complete all as specified and directed. |
| 120 | M&L for 10mm thick screed bed on concrete surfaces in CM (1:3) finished even and smooth without using extra cement complete all as specified and directed. |
| 121 | M&L for PCC 40mm thick (1:2:4) type Bo using 12mm graded stone aggregates mixed with integral waterproofing chemical mixed in proportion of 200ML/50Kg cemet in proportion 200ML/50Kg cement as in padding on roof surfaces for correcting/ making proper slope on roof/ chhaja and roof kerbs/ benching complete all as specified and directed. |
| 122 | M&L for water proofing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/Sqm. The height of the roof may upto 9 m comprising with following items complete all as specified and directed:- (i) The surface of roof, parapet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting.(ii) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kg per sqm to be applied on prepared surface till the surface is properly impregnated.(iii) Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm.(v) Laying of water proofing APP modified polymeric water proofing membrane of weight not less than 3mm thick composed of woven polyster center core, which is sandwitched between high quality polymeric bitumen mix having softening, high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps as per manufacture instruction etc. |
| 123 | M&L for applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces, complete all as specified and directed |
| 124 | M&L for Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed, set jointed and pointed with neat cement slurry on roof and cut and polished over and including 15mm thick screed bedding in Cement mortar (1:4), complete all as specified and directed |
| 125 | Taking down carefully copper/ aluminium point wiring (light, fan, sockets or power) complete including all fitings and fixtures such as switches, sockets, ceiling roses, pendens, regulators, light fittings etc, removing matrials to store for taking credit and making good disturbed surfaces complete all as specified and directed. |
| 126 | Taking down carefully copper/ aluminium sub-main wiring any type and making good the disturbed surface of walls and floors etc. complete all as specified and directed. |
| 127 | Taking up/ down existing single phase electric energy meter of any capacity after disconnecting all necessary electrical connections and re-fixing after work complete all as specified and directed. |
| 128 | Taking up/ down existing ceiling fan and exhaust fan of any size and re-fixing the same after B/R work including servicing/ overhauling, winding of the fan, replacement of defective parts, painting of the complete fan with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter and providing three core flexible copper cable for connection from ceiling rose/ connector complete all as specified and directed. |
| 129 | Taking down existing geyser any size in position and re-fixing the same after B/R work including painting of the same with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter, with and including providing three core flexible copper cable for connection from ceiling rose/ connector complete all as specified and directed by Engr-in-Charge. |
| 130 | M & L for Point wiring for One light/ fan/ bell controlled by one, one way switch 5/6 Amps with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete, including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly including modular flush box with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches and blank plates of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc., complete all as specified and directed. |
| 131 | All as per Srl item No. 130.00 above but One light/ fan/ bell controlled by one, two way switch 5/6 Amps |
| 132 | All as per Srl item No. 130.00 above but One 3 pin, 5/6 Amps socket outlet point on independent board controlled by one, one way 5/6 Amps switch |
| 133 | All as per Srl item No. 130.00 above but One 3 pin, 5/6 Amps socket outlet point on same board controlled by one, one way 5/6 Amps switch |
| 134 | M & L for Point wiring with 2.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 2.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 Amps socket out-let point on an independent board including modular flush box with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches and blank plates of suitable size and making good disturbed surface of walls and floors etc. complete all as specified and directedNote:- Make of GI flush box should be same with switch/ socket |
| 135 | S&F for Ceiling rose, surface bakelite with three terminals ISI marked, AC, 50 HZ, 230V, complete all as specified and directed. |
| 136 | S&F modular switch 1 way 6 A, 1 module, complete all as specified and directed. |
| 137 | S&F modular switch 2 way 6 A, 1 module, complete all as specified and directed. |
| 138 | S&F modular socket 6 Amps 2/3 pin combined 2 module, complete all as specified and directed. |
| 139 | S&F switch modular type 16 A, 1 module, complete all as specified and directed. |
| 140 | S&F socket modular type multipurposes 6/16 A, 2 module, complete all as specified and directed. |
| 141 | S&F modular bell push flush type, 5 Amp complete all as specified and directed. |
| 142 | S&F lamp holder insulated body with back plate for batten fittings, complete all as specified and directed |
| 143 | S&F Buzzer Ding Dong AC 230 Volt single pole, complete all as specified and directed |
| 144 | S&F in repair Inverter LED batten 20 watt with squre profile and polycarbonate channel. Lithium lon battery with charging time 8 hourse -10 hourse and back up time upto 3 hours. with extruded environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories complete all as specified and directed. |
| 145 | S & F for Energy saving new generation environmental friendly long life versatile LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including necessary mounting arrangements and provision of 2.5 Sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting and necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts including taking down old unsv street light complete all as specified and directed. |
| 146 | S&F in repair 10W LED 6500K lights fitting Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories, complete all as specified and directed. |
| 147 | S&F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globle suitable for LED bulb and provision of LED bulb 10 watts including taking down old unsv light complete all as specified and directed. |
| 148 | S&F replacement LED bulb of 7 watt, of base B-22, 6500 K suitable for fixing in lamp holder, complete all as specified and directed. |
| 149 | S&F replacement LED light fitting 1 x 9W/ 1 x 10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size including taking down old unsv bulkhead, complete all as specified and directed. |
| 150 | S&F of MCB DB SPN 8 way dounle door with 200 Amp rated bus bar, 230 volts 50 Hz including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc including taking down old unsv DB and making good of disturbed surface to match with existing colour of wall complete all as specified and directed. |
| 151 | S&F in replacement 32 Amp rating 240V 10KA 'C' curve, mainiature circuit breaker (MCB) of SPN 32 Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning by using lugs complete all as specified and directed. |
| 152 | S&F in replacement 240V 10KA 'B' curve, mainiature circuit breaker (MCB) of single poles current carrying capacity 5 to 32 Amp in the MCB DB complete with connection testing and commissioning by using lugs complete all as specified and directed. |
| 153 | S&F for PVC non-metallic rigid conduit ISI marked heavy duty white/ ivory colour and its accessories heavy duty ISI marked of size 25mm dia for telephone and TV connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed. |
| 154 | S&F for modular type TV Socket out let complete all as specified and directed. |
| 155 | S&F in repair single pole and earth encolsure with a two pin and earth plug with socket 240 volts 50 Hz complete with one single pole MCB SP 20 Amps complete all as specified and directed. |
| 156 | M&L for Sub main wiring with 02 runs of 6 Sqmm main wire along with 01 run of 06 Sqmm earth wire (green in colour) single core FRLSH PVC insulated unsheathed 1100 volts grade, ISI marked multistranded copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed/ surface conduit (medium grade) wherever necessary with all fittings & accessones including cutting chases for conduits as required, sinking for terminal box, making good the same including taking down old sub main wiring, complete all as specified and directed.Note:- Four runs of main copper conductor, two run of earth wire and one run of PVC conduit shall be measured as one unit length. |
| 157 | M&L for Sub main wiring with 02 runs of 4 Sqmm main wire along with 01 run of 04 Sqmm earth wire (green in colour) single core FRLSH PVC insulated unsheathed 1100 volts grade, ISI marked multistranded copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed wherever necessary with all fittings & accessones including cutting chases for conduits as required, sinking for terminal box, making good the same including taking down old sub main wiring, complete all as specified and directed.Note:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. |
| 158 | S&F for exhaust fan, steel body AC single phase 230 volt of size 300mm sweep complete with blade, frame and louver including taking down old unsv exhaust fan and deposit the same in the AGE E/M-III store complete all as specified and directed. |
| 159 | S&F plastic body exhaust fan AC single phase 230/ 240 V of size 200mm sweep with louver, white in colour including cutting of wall and duly connection with copper wire from ceiling rose, including taking down and old unserviceable exaust fan and deposit to AGE E/M-III Store complete all as specified and directed. |
| 160 | M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 Sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150mm c/c both ways etc complete all as shown in electrical plate No.5, connected to earthing test point complete including testing on completion, including taking down old unsv earthing, complete all as specified and directed. |
| 161 | Supply & laying and testing commisioning cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core laid in pipes, trenches/ ducts on poles including taking down old unsv cable, complete all as specified directed. |
| 162 | Supply and laying jointing GI pipe light grade 50mm bore trenches/ under floor or roads/ along poles/ on walls incl clamps for protection of cable incl fittings complete all as specified and directed. |
| 163 | Excavation in trenches not exc. 1.5m wide and not exc 1.5m deep in hard/ dense soil and getting out complete all as specified and directed. |
| 164 | Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed. |
| 165 | Removing surplus excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and directed. |
| 166 | M&L for filling approved fine crusted sand in trenches as cable cushion to the full width of excavated trench, under and over cable complete all as specified and directed.(Note : Punned thickness of sand shall be measured) |
| 167 | M&L for bricks slightly over burnt (kiln burnt), modular bricks, best quality, locally available, laid flat, dry, laid in trenches along the length of cable transvarsally with width equal to length of brick for cable protection complete all as specified and directed. |
| 168 | S&F for modular fan regulator step type, 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and directed. |
| 169 | Supply assembly, erection, testing commissioning of indoor wall mounted panel frame size of 1200mm x 1100mm x 300mm mounted cubical type factory made wall mounted LT panel board suitable for 415V 3 phase 4 wire, 50HZ non metalic kiosk single door with the required provision for 3 switch gears and control gears along with the approved make. Enclosed in a modular/ combinable thermoplastic polycarbonate enclosure which should be shock proof, IP65 (Weather proof) rust proof, dust proof, water proof, corrosion proof having internally embadded gasket polyurethin material on the lid and cable entry knockouts on all sides or using cable entry flanges of size 300 x 300x 170mm required of the LT panel including eight comparment for fixing of eight Nos single phase meter and MCB and providing glass view for reading of meter complete fabrication shall be painted as per specification. Wall mounted LT indoor panel board shall be complete with all standard accessories factory made with OEM manufacturing certificate & the type tests report as per CPRI with the following test-degree of protection of system, temperature rise limit, IEC 60 439-1 including selector switches, phase indicating lamps control fuse unit, MV danger notice plate numbered/ lettered and with comprising the following including taking down old LT panel:-Incoming : MCCB 100 A, 4 pole, 25KA-1 No. Indication CTs, Digital Ampere Meter, ASS Digital Volt Meter, VSS Phase indicating lamps & Control Fuses/ MCBs etc.BUSBAR : Copper strip busbar rating 250A of size for Ph 25 x 10mm, N&E 25 x 5mm and short circuit capacity 30 KA with PVC sleeves with maintained the colore code and provision of making holes with copper nuts, bolts, & washer for cable connection including hydrograpic insulatore with nuts & bolts at both ends - 05 NosOutgoing : Separate cubical chamber with a cable alley not less than 300mm width for inatallation/ connecting the following switch gear. (i) MCB, 40A DP Amps, 240 volts, ‘C’ curve, 10 KA - 07 Nos. (ii) MCB, 10A DP Amps, 240 volts, ‘C’ curve, 10 KA - 01 Nos. (iii) Fixing only single phase serviceable existing electric meter - 07 Nos (obtained from item No. 3). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 07, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysJul 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender