|
| 1 | Supply and fixing Water Proof Plywood Modular Two Seater Workstation Dais of Required size and Height of 1.2m with Plain Red Carpet finishing included cost of Synthetic Resin - Fevicol for pasting and all material, Transport charges, Loading unloading, all labour charges etc complete as Directed by Departmental officers. |
| 2 | Rectangle Conference Table Size of 8' -0''X 4'-0'' X 2'-6' |
| 3 | Special Type Chief Executive Table 8'-0'' X 4' -0''X 2' 6\\" / side unit 4'-0'' X 1'-6''X 2'-6'' with 8 mm glass top made out of 18 mm commercial plywood, 6 mm commercial plywood as per is;303/1989, 1.2 mm laminate sheet, 20\\", 16\\" telescopic channel, 4\\" handle ,lock arrangements with 8 mm plain glass top good finish |
| 4 | Executive Table size of 6' L x 3' B x 2.5' H with side unit of size 4' L x 1.5' B x 2.25' H Made out of 18mm, 12mm commercial plywood as per IS;303/1989, Fully laminated by 1.2mm High Glossy Laminated sheet, 45x2mm, 20x2 mm edge band tape, auto hinges, telescopic channel 20'', 16'', SS 6\\", 4\\" handle, MP Lock with good finish. |
| 5 | Modular Executive Table Size of 5' 0\\" x 3' 0\\" x 2' 6\\" With Movable Pedestal Unit made out of 18 mm, 6 mm commercial plywood as per is;303/1989 , both side are laminated by 1 mm high glossy laminate as per is;2046 , lock, handle, 20'' , 16'' telescopic channel , 20x2mm, 22mm x 0.5mm pvc edge band with good finish. |
| 6 | Wooden conference chair with arm |
| 7 | Wooden table 4'-0'' x 2' -0''x 2'-6'' laminated finish with one rh drawer and cupboard and keyboard arrangements made out of 18 mm, 6 mm commercial plywood as per is;303/1989 , both side are laminated by 1 mm high glossy laminate as per is;2046 , lock, handle, 20'' , 16'' telescopic channel , 0.8mmx22 mm edge band with good finish |
| 8 | Supply and fixing Plywood Modular partition work of Required size of height 1.2m made with Water Proof Plywood 19mm thick Aluminium Strips of size 40mm wide x 1.5mm thick Alu.section 50 x 25 x 1.50mm frame work at 600mm C/C in vertical direction and 1250mm @ C/C at horizontal direction with necessary rubber beadings, screw Laminates sheets 1.0mm Thickness, including cost of Synthetic Resin - Fevicol for pasting and all materials, Transport charges, Loading unloading, all labour charges etc complete as Directed by Departmental officers. |
| 9 | Supply and fixing Plywood Partition of Required size of height 2.5m made with Water Proof Plywood 19mm thick Alu.section 50 x 25 x 1.50mm frame work at 800mm C/C in vertical direction and 1250mm @ C/C at horizontal direction with necessary rubber beadings, screw and both Side Laminates sheets 1.0mm Thickness, including cost of Synthetic Resin - Fevicol for pasting and all materials, Transport charges, Loading unloading, all labour charges etc complete as Directed by Departmental officers. |
| 10 | Providing Wall Panelling using one side teak wood sheet with melamine polishing with following specification. The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both diretions, fixing water proof plywood of 12mm thick over the aluminium frame work with necessary screws. One side teak wood sheet of 3.5mm thick will be fixed over the plywood using adhesive and finishing with melamine polishing and the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern, water proof plywood, OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete. |
| 11 | Supplying, fabricating and fixing in position of Aluminium anodised natural colour matt finish of single leaf fully panelled sliding door with 12mm thick bothside prelaminated partile board at the Shutter bottom rail:[email protected] kg/m,Top & Verticle 50x44.45x2.50mm @ 1.292 kg/m,Lock rail 50x44.45x2.50mm @ 1.292 g/m, Running channel section:[email protected] kg/m, and necessary accessories such as Alu.clips 17.15x17.27x1.50mm @ 0.176 kg, Alu handle 100x30mm @ 0.988 kg/mfull length of handles on both sides, lock, roller, including cost of materials, labour charges and power consumption charges required for fabrication including chipping, dismantling and waking hole to the required extent in RCC column, beam masonry with power drill wherever necessary and redoing the damaged portion to the original condition afterfixing etc. complete. All the Alu. sections are to be anodised.with matt finish under electically contolled condition in accordance with IS 1868/1962 for an average anodic film thickness of 15 microns etc., |
| 12 | Supply and delivery of ultimate high back revolving chair,staff revolving chair and visitor chair with arms and plastic outer cover, Primary Material – Castors, Chair base, Gas lifter, chair arm, Press wood sheet, Plastic outer cover, Style – Modern, Finish – Fabric etc., complete |
| 13 | A) OFFICER CHAIR |
| 14 | B) STAFF CHAIR |
| 15 | C) VISITOR CHAIR |
| 16 | Wooden Special Type DIWAN Size of 6'-9'' X 2'-6''X 1'6''/ 22'' Head Rest made out of teakwood frame with leg & bottom, 12mm commercial plywood and 100 mm latex foam with fabric finish with two numbers of bolster of size; 6'-9'' x 2'-6''x 1'6''/22'' head rest with good polish finish. |
| 17 | Dressing Table of size 3' L x 1' 6\\" / 1' B x 6' H with three drawerMade out of 18mm,12mm BWP Plywood as per Is 710(2010), 1mm high glossy laminated sheet, 2mm edge band tape, 5mm mirror, 8mm tinted glass shelf, 6\\" handle, 16\\" telescopic channel, magnetic catcher for door, bush with good finish |
| 18 | Executive Ultima High Back Revolving Chair Made out of 5 prong sheet metal chromium heavy base powder coat finish sincro tilting arrangement .Moulded Knitted High Back Rest with cushion head rest,Adjustable Heavy type Handle , plywood with 50mm moulded foam for seat,with Rexine / Upholstery Cloth finish |
| 19 | Fully upholstry sofa 3 seater Made out of fully upholstered 3 sofa set with 75 mm,25 mm ,15 mm 40 density U foam and 3'' ,2'' latex rubber,12 mm slab with silver wood frame ,6 mm commercial plywood as per is;303/1989 , teakwood bottom leg with fully upholstry cloth finish. Three seater – 1 No |
| 20 | Supply and delivery of Steel 3- seater perforated visitors chair Powder coated (50 microns) Green Color Family of Separate cushion/foam of Chair backrest etc complete as Directed by Departmental officers. |
| 21 | Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using adhesive along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work. |
| 22 | Steel rack (Open type) of size: 75” x 33” x 18” powder coat finish Made out of 18 G CR sheets as per IS ; 513 GR, 37 x 37 x 3 mm M.S. angle having 6 fixed shelves forming 5 compartments with powder coat finish. |
| 23 | Teak wood 3' -0'' dia dining table ornamental teakwood leg with 12mm tinted bronze glass with good polish finish |
| 24 | Teak wood dining chair cushion seat & reaper back made out of good quality of teak wood frame,2'' latex rubber for seat with upholstery cloth and good polish finish |
| 25 | Wash Hand Basin of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia 'B' Class GI Waste Pipe, 15mm dia GM Wheel Valve, 15mm dia Nylon Connection, 15mm dia Brass Nipples, 15mm CP Pillar Tap etc White without Pedastal |
| 26 | Supplying & Installing CURTAIN BLINDS with Sunscreen perforated Roller blind optima series Basket 125 Tex with fabric specification of (Fabric compositition polyster 22% and PVC78%, Openenss Factor-5%, Thickness -0.68MM +/-5%, weight per m2 -480 GSM, yarns count in wrap/ weft/cm 19/18+/-5%, Fire Resistance-FR(USA) KFI(Korea), Tear Resistance-wrap11.9 daN+/5%,WEFT 150 daN+/-5%,colour fastness-6-7/8 (white colour base), artificial llight xenon lamp, UV resistance Min3 (White colour base), width 2.5M & 3 M. The Roller mechanism shall be a moulded unit made from engineering grade plastic polymer with PVC spring support. The Fabric shall be attached to the roller tube with high quality self adhesive tape with manual operation. The fabric shall be attached to the tube with adhesive strip. It should have minimum one ton fabric which must be placed on the roller before the working section of fabric start Operational action shall be smooth including necessary hardware for fixing at all places & as directed by Engineer-in-charge etc complete. The rate is inclusive of laying, conveyane, all other Tools and Plants involved in the work charges and all other incidental charges etc. complete and as directed by the departmental officer (The materials quality, brand, colour, shade should Be approved by the Executive Engineer before use on works). |
| 27 | Wiring with 2 x 4 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with suitable Module Plastic surface mounting switch box on wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 4 sq.mm copper wire for Open PVC pipe power Plug point ( 8 points / Coil) Higher End |
| 28 | Supply and fixing of 24W LED Round Type Surface mounted downlight Complete, as directed by the Departmental Officers and as per standard specifications. |
| 29 | Providing, assembling and supplying of Single reflective glass panels, 6mm thick heat Strengthened reflective Glass of approved colour, size and shape as required shade with reflective soft coating on surface #2 etc. all complete for the required performance , as directed by the engineer -in - charge. The heat strengthened reflective glass having properties as minimum visible Light transmittance (VLT) of 35-67% or less, Solar heat gain coefficient less than or equal to 0.35-0.5 or less and U value of 5.0-5.6 W/m2 K or lower degree etc. Equivalent SHGC should satisfy the ECBC norms. For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.For cuved open hall area |
| 30 | Aluminium Extruded Sections (for Doors, Windows, Ventilartors, Partitions, False Ceiling etc) including charges for anodising for 15 micron thickness Natural Colour Matt Finish. For closing the open curved area |
| 31 | Supply and Fixing PVC Portable Toilet are mobile toilets designed for temporary or permanent use Complete, as directed by the Departmental Officers and as per standard specifications. |
| 32 | Supplying, laying and jointing UPVC pipes of Class 5 (having working pressure of 10 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best 20mm dia including cutting, and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3(2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works. - Internal water supply - above ground level. |
| 33 | Supplying and fixing in position best quality PVC soil / waste pipes of 110mm dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level |
| 34 | Supplying, fabricating, erecting and fixing Calcium Silicate Board False Ceiling upto a ceiling height of 4.5m from floor level Using Perforated Sheets (10mm thick) |
| 35 | Paving the floor with best quality vitrified Tiles ( Double charged Matt & Glossy finish 600x1200x8.5mm size) of following size and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Please Enable Macros to View BoQ information |
