|
| 1 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and removal of debries to a distance exe 1.5 km but not exe 5.0 km complete all as specified and directed. |
| 2 | M&L for rendering 15mm thick in cement mortar 1:4 on external faces of walls of brick work/concrete surfaces, mixed with water proofing compound @ 3% by weight of cement or as per manufacturer instructions and finished the surface even and smooth without using extra cement complete all as specified and directed.(WPC shall be measured and paid seperatly) |
| 3 | Supply only integral water proofing compound (ISI Marked) |
| 4 | M&L for preparation of newly plastered surface of walls and finishing with Acrylic smooth exterior paint of required shade: New work ( two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exteror primer applied @ 2.20Kg/10sqm as per manufacturer instructions complete all as specified and directed. |
| 5 | M&L for preparation of old decorated surface of walls and finishing with one coat of exterior paint of required shade complete all as specified and directed. |
| 6 | M&L for complete removal of existing traetment of old surface including brooming down /steel wire brushing , scaping down smooke soot, moulds, mass anf efforescent salt and trading oil and greasy spots and cleaning with water on wall surfaces complete all as specified and as directed. |
| 7 | M&L for preparation of external wall surface and finishing with Acrylic smooth exterior paint of required shade: New work ( two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exteror primer applied @ 2.20Kg/10sqm as per manufacturer instructions complete all as specified and directed. |
| 8 | M&L for preparation of old steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 9 | M&L for preparation of old steel surfaces of any description n exe 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 10 | Dismentling of fencing wire mesh of any size and nature copmlete all as specified and directed |
| 11 | Dismentling of fencing posts/Struts (wood/steel or RCC) any section including taking out embeded portion and making good disturbed ground in natural ground base foundation copmlete all as specified and directed |
| 12 | Excavating in post hole (or similar holes ) each not exceeding 0.5 Cum in soft/loose soil, including getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus loil to a distance not exceeding 50 m and making good disturbed surface complete all as specified & directed. |
| 13 | M&L for PCC 1:2:4 type B-2 (using 40 mm grade stone agg) as in foundation filling and mass concrete complete all as specified and directed. |
| 14 | M&L for mild steel work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting and spot welding etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 15 | S&F for Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) |
| 16 | M&L for 12 mm dia mild steel bolt with lenth of bolt exc 5cm but n.exc 10 cm long with out whaer, spuare or hexagonal head at one end and screwed at other en etc complete all as specified and directed |
| 17 | Supply only chain link fencing mild steel galvanised fencing any size and type (size of mesh and dia of wire as directed by Engg-in-charge) complete all as specified and as directed. |
| 18 | Fixing only chain link fencing of any type fixed to RCC/steel post with mild steel flat & nut bolt etc. complete all as specified and directed.Note: (i) Supply only fencing, will be measured and paid separately.(ii) Supply and fix mild steel nut bolt, line wire and flat will be measured and paid separately. |
| 19 | S&F Mild steel TMT bars 10 mm dia and over as in strengthing bars for chain link fencing cinfirming to Fe-290 Gde E-165 etc complete all as specified and directed |
| 20 | S&F in repair GI concertina coil 1050mm dia (in stretched position), hot dip galvanised made of high tensile core wire of 2.5 mm dia having a strength of 165 Kg/Sqmm and the razor barb tape of 0.5mm thick width barb width of 15mm and length of 22mm, spacing 34mm and coated with zinc 230 gsm /sqm having 56 loops with 3 clips per loops and giving coverage of not exc 6Mtr per coil comforming to latest IS code , making diamond shape with the help of dove tail clips (18 SWG), fixed to the MS angle iron/precast RCC fencing post with and including binding wire complete all as specified and as directed. |
| 21 | Dismentling structural steel work including doors,gates ,framed trusses or similar steel work etc. complete all as specified and directed |
| 22 | S&F MS Framed work such as grills , gates,framed trusses & trolly gates etc with ends of bars shouldered cofirming to Fe-290 Gde -E-165 complete all as specified and directed |
| 23 | S&F in repair double flanged cast iron bottom wheel of any dia 75 mm thick including necessary cutting of surclip grooves,bearing grooves and boost grooves with and including fixing to shaft with nuts and bolts of any dia complete with two bearing at each side of wheel and necessary fittings etc complete all as specified and directed |
| 24 | M&L for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 25 | M&L for preparation of newly steel surfaces of any description n exe 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 26 | M&L for welding in repair exe 2.5 cm but n exe 5 cm in length ,thickness of metal to be welded n exe 6 mm as in hanger doors,trolly gates etc as any height as per ground complete all as specified and directed by Engr-in-charge. |
| 27 | Deduct Schedule of Credit of ₹ 51225.00 as brought out from serial page No 23 of tender Please Enable Macros to View BoQ information SCHEDULE OF CREDIT 1. All worn out/unserviceable materials/items which will be obtained from different items of Sch `A’/ BOQ (as mentioned above) during replacement work, shall become contractor’s property and amount of credit shall be recovered from the contractor's RAR & final bill as and when payments are submitted. These materials shall be allowed to be removed from works site only after credit amount for the same is recovered from the contractor’s payment. Items not covered under this Schedule shall become the property of department and the same shall be returned/ deposited by the contractor at MES store yard without any extra cost to department/ government and all materials which are credited to the contractor, shall be recorded in MB 2. The contractor shall have no claim regarding fixation of credit rates in this schedule and no rebate on \\"Schedule of credit\\" rates/ amount shall be accepted. However contractor can offer more credit rates/ amount. 3. The total credit amount may vary as per execution of work above different items involved in this credit schedule. 4. The quantities given in column 4 are provisional and same shall be measured and paid based on actual quantities obtained against relevant items of Schedule ‘A’/ BOQ. These materials shall not be reused/ reincorporated in the work except where specified. 5. The measurements of dismantled materials shall be the gross quantity obtained and not the net quantity considered for payment in schedule. The old and unserviceable materials to be retrieved from taking down/demolition/dismantling etc are considered in schedule of credit. No claim of contractor with regard to quality/position of old materials shall be entertained Srl No Description of item Qty Unit Assessed rate by department Remarks Rate in (Rs) Amount in (Rs) |
| 28 | Galvanised, 2 strand, steel barbed wire 2.24 mm dia |
| 29 | Scrap iron |
| 30 | Old Unserviceable fencing of any description |
| 31 | Old US concertina coil of any type and description |
| 32 | Old US bottom wheels of any size and description Total amount of credit schedule 51225.0 Signature of contractor AGE (Contracts) For ACCEPTING OFFICER |
