|
| 1 | CHARPOY GI :- Remove unsv plywood from Charpoy GI and supply & fixing new plywood 12mm thick with 10 Nos countersunk screw and washer complete all as specified and directed. |
| 2 | Remove unsv long rail from charpoy GI and supply & fixing 32mm dia GI Pipe med grade (ISI marked). Long rail as required size and as directed. |
| 3 | Remove short rail from Charpy GI including cutting and threading of short rail from retrived unsv long rail and fixing as required size as directed. |
| 4 | Remove unsv charpoy GI Elbow 32mm dia, 3 way from GI Charpoy and supply and fixing new elbow as directed. |
| 5 | Remove the old welding spots from broken welding joints and re-welding from charpoy GI in the same place as required. including preparation of old surface by sand paper No 50 and wire brush and apply one coat of synthetic enamle paint in silver colour over a coat of red oxide primer complete all as specified and directed. |
| 6 | REPAIRS TO BED HARD TOP STEEL:- Remove the exisiting unserviceale/broken ply wood top and supply and fixing new 12mm thick BWR plywood top alongwith 06 Nos countersunk screw and washer on three stiffeners complete all as specified and directed. |
| 7 | REPAIRS TO BED HARD TOP STEEL:- Remove the exisiting unsv head & foot board and S & F new head & foot board with 18mm thick BWR ply wood of grade A/MDF (in lieu of pre-laminated board) duly pasted with 1mm thick laminated sheet on both sides of approved shade and texture along with 6mm teak wood beading shall be provided to all edges. |
| 8 | REPAIRS TO BED HARD TOP STEEL:- Remove the old welding spots from broken welding joints and re-welding in the same place as required including preparation of old surface by sand paper No 50 and wire brush and apply one coat of synthetic enamle paint in black colour over a coat of red oxide primer complete all as specified and directed. |
| 9 | REPAIRS TO BED HARD TOP STEEL:- Remove the exisiting unsv PVC shoes and S & F new high quality PVC shoes 40mm having metal washer inside as per exisiting pattern. |
| 10 | CHARPOY IP HARD TOP (Squre Tube). Remove the old welding spots from broken welding joints and re-welding in the same place as required & denting and straightning of MS Pipes including preparation of old surface by sand paper No 50 and wire brush and apply two coat of synthetic enamel paint in black colour over a coat of red oxide primer complete all as specified and direct. |
| 11 | CHARPOY IP HARD TOP (Squre Tube) :- Remove the exisiting unserviceable/broken ply wood top and supply and fixing new 12mm thick BWR plywood top with countersunk screws 06 Nos bolted on the stiffners complete all as shown on drg and as specified and directed. |
| 12 | CHARPOY IP HARD TOP (Squre Tube) :- Remove the exisiting unsv shoes and S&F new PVC shoes in each legs of Charpoy IP Hard Top as per exisiting pattern. |
| 13 | M&L for preparation of old painted steel surface of charpoy square tubular/Bed Hard Map and applying one coat of synthtic enemal black paint complete all as specified and as directed. |
| 14 | REPAIR TO ALMIRAH STEEL LARGE : Replacement of exisiting unserviceable handle by providing new mild steel chromium plated handle of standard size including nuts and washers for Almirah large/medium steel best quality as approved all as specified and directed. |
| 15 | REPAIR TO ALMIRAH STEEL LARGE : S & F new 75mm 6 lever lock with brass levers & stainless keys in duplicate fixed with suitable screws/welding as required for almirah large steel incl removing the exisiting unserviceable lock. |
| 16 | S & F new steel cleats for supporting shelves in Almirah large steel incl removing the exisiting unserviceable cleats complete all as directed. |
| 17 | Remove unserviceable legs and S & F new legs of Almirah large steel made of 1mm thick CRCA sheet bend to shape duly painted with one coat of red oxide primer and fix with Gas welding as shown on drg complete all as specified and directed. |
| 18 | Remove unserviceable 3 way locking device from Almirah large steel supply and fixing new locking device as per existing complete all as specified and directed. |
| 19 | M & L for welding of thickness exc 6mm and length exc 2.5cm foot rest of Almirah large steel by gas welding wherever required complete all as specified and directed. |
| 20 | Preparation of old painted surfaces of Almirar large steel internally and externally including shelves (Top & bottom ) by No 50 sand paper and wire brush. Applying putty on the patch and rubbing with sand paper No 150 to make surface even including applying one coat of red oxide primer and applying one coat synthetic enamel paint by spray painting of approved colour all as specified and shown on drawing. |
| 21 | REPAIR TO ALMIRAH MEDIUM STEEL: (1270mm x 765mm) Replacement of exisiting unserviceable handle by providing new mild steel chromium plated handle of standard size including nuts and washers for Almirah large/medium steel best quality as approved all as specified and directed. |
| 22 | REPAIR TO ALMIRAH MEDIUM STEEL: S & F new 75mm 6 lever lock with brass levers & stainless keys in duplicate fixed with suitable screws/welding as required for almirah medium steel incl removing the exisiting unserviceable lock. |
| 23 | S & F new steel cleats for supporting shelves in Almirah medium steel incl removing the exisiting unserviceable cleats complete all as directed. |
| 24 | Remove unserviceable legs and S & F new legs of Almirah medium steel made of 1mm(19mm Guage) thick CRCA sheet bend to shape duly painted with one coat of red oxide primer and fix with Gas welding as shown on drg complete all as specified. |
| 25 | Remove unserviceable 3 way locking device from Almirah medium steel supply and fixing new locking device all as specified. |
| 26 | M & L for welding of thickness exc 6mm and length exc 2.5cm foot rest of Almirah medium steel by gas welding wherever required complete all as specified and directed. |
| 27 | Preparation of old painted surfaces of Almirar medium steel internally and externally including shelves (Top & bottom ) by No 50 sand paper and wire brush. Applying putty on the patch and rubbing with sand paper No 150 to make surface even including applying one coat of red oxide primer and applying one coat synthetic enamel paint by spray painting of approved colour all as specified and shown on drawing. |
| 28 | BED SIDE LOCKER STEEL 760mm x 600mm x 1100mm. Replacement of exisiting unserviceable handle by providing new mild steel chromium plated handle of standard size including runts and washers of bed side locker steel best quality as approved all as specified and directed. |
| 29 | S & F new 75mm 6 lever lock with brass levers & stainless keys in duplicate fixed with suitable screws, welding as required for bed side locker steel incl removing the exisiting unserviceable lock complete all as specified and directed. |
| 30 | S & F new steel cleats for supporting shelves in bed side locker steel incl removing the exisiting unserviceable cleats complete all as directed. |
| 31 | Remove unserviceable legs and S & F new legs of bed side locker steel made of 1mm(19 Guage) thick CRCA sheet bend to shape duly painted with one coat of red oxide primer and fix with Gas welding as shown on drg complete all as specified. |
| 32 | Remove unserviceable 3 way locking device from bed side locker steel and fixing new locking device complete all as specified and directed. |
| 33 | M & L for welding of thickness exc 6mm and length exc 2.5cm foot rest of bed side locker steel by gas welding wherever required complete all as specified and directed. |
| 34 | Preparation of old painted surfaces of bed side locker steel internally and externally including shelves (Top & bottom ) by No 50 sand paper and wire brush. Applying putty on the patch and rubbing with sand paper No 50 to make surface even including applying one coat of red oxide primer and applying one coat of synthetic enamel paint by spray painting of approved colour all as specified and shown on drawing. |
| 35 | REPAIR TO CHAIR VERANDAH. Remove the exisiting unserviceable/plastic cane and re-canning of chairs verandah with 4mm wide 0.5mm thick plastic cane complete all as specified and directed. |
| 36 | Preparing the exisiting steel surface welding and painting with two coats of white synthetic enamil paint of chair verandah complete all specified and directed. |
| 37 | provide new plastic shoes for chair verandah & including taking down old shoes complete all as specified and shown on Drg. |
| 38 | Chair CB Steel With and with out Arms : Removing the exisiting unserviceable/broken seat for chair CB Steel with arms and supply and fix new seat of size 450 x 390mm complete without arms with frame made out of 50 x 50mm 1st class hard wood members & canned with 2mm wide plastic cane of oval shaped & 4mm wide plastic cane for borders and complete all as specified and shown on drg including french polishing to wooden surface all as directed. |
| 39 | Removing the exisiting unsv back rest of chair CB steel and fixing new back rest of size 450 x 390mm complete with frame made out of 50 x 50mm 1st class hard wood members & canned with 2mm wide plastic cane of oval shaped & 4mm wide plastic cane for borders and complete all as specified and shown on drg including french polishing to wooden surface all as directed. |
| 40 | Removing the exisiting unserviceable/broken Arms rest for chair CB steel with arms and supply and fix new Arms rest of size 420 x 50 x 20mm 1st class hard wood made to complete all as specified & shown on drg including french polishing to exposed surfaces all as directed. (Each Arms rest measured separately) |
| 41 | S & F MS plate of size 50mm x 20mm x 4mm thick duly welded on two seat pipe for support to seat of chair CB steel all as specified and directed. |
| 42 | Preparation of steel surface of chair tubular steel with arms and applying one coat of synthetic enamel paint of aproved colour over a coat of primer complete all as directed. |
| 43 | TABLE COMPUTER. Removing the exisiting Top of table computer 3'x2' and S&F new top of size 900mm x 600mm 18mm thick prelaminated MDF board exterior grade both side decorative with standard PVC edging around and all as shown on drg. |
| 44 | Removing the exisitng any kind of unsv MDF board shelf and S&F new shelf of size 450 x 300mm made out of 18mm thick both side prelaminated MDF board exterior grade both side beich colour as per exisiting with standard PVC edging around and all as shown on drg of table computer. |
| 45 | Removing unsv exisiting keyboard tray of table computer and supply and Fix new key board tray of size 480mm x 300mm duly covered with PVC edging and one set of telescopic channel of size 300mm as per drg and as specified. |
| 46 | Removing unsv drawers of table computer and S&F new drawer of size as following:- (a) Front made of PLMDF Board Ext Gde of Size 230x130mm(b) Sides made of PLMDF Board Ext Gde 300mm x 90mm(c ) Telescopic channels two in nos 300mm long(d) Bottom made of computer PLMDF Board Ext Gde 300mm x 175mm(e) Drawer End of size 140mm x 900mm PLMDF Board Ext Gde |
| 47 | M&L for welding of thickness 6mm and length 2.5cm on frame of table computer by gas welding wherever required complete all as specified and directed. |
| 48 | TABLE OFFICE CLERK STEEL. Removing the exisiting unsv /broken top of steel table office clerk steel and S&F new table top of 1370 x 760mm of 18mm thick prelaminated MDF board exterior grade with both side decorative with 6mm thick half round teakwood edging around all as specified on drg. |
| 49 | Removing the exisiting unsv / damaged drawers of table office offrs steel / table clk steel and S&F new drawers made of 1mm thick MS sheet bend to shape as including necessary welding as shown on drg. |
| 50 | Removing the exisiting unsv lock and supply and fix new brass lock with duplicate keys of office table. |
| 51 | Preparation of old painted surface of table internally and externally including shelves (Top & bottom) by No 50 sand paper and wire brush. Applying putty on the patch and rubbing with sand paper No 150 to make surface even thereafter applying one coat of red oxide primer and applying one coat synthetic enamel paint by spray painting of approved colour all as specified and shown on drawing. |
| 52 | Removing unsv rubber shoes S&F new PVC Rubber shoes with steel plate inside computer table completed all as specified and directed.` |
| 53 | REPAIR TO TABLE DINING 6 PRES. Removing the exisiting unsv/broken top of Table dining 6 pers and supply and fix new table top of prelaminated MDF Board exterior grade of 18mm thick both side laminated duly covered with teakwood beading 6mm thick half round all around, complete all as specified. |
| 54 | Removing the exisiting unsv/broken long rails of table dinng 6 pers and supply and fix new long rails made of 1st class hard wood of size as shown on drawing complete all as specified. |
| 55 | Removing the exisiting unsv/broken short rails of Table dining 6pers and supply and fix new short rails made of 1st class hard wood of size as shown on drawing all as specified. |
| 56 | Removing the unsv/broken legs of table dining 6pers and supply and fix new legs made of 1st class hard wood all as specified and shown on drg. |
| 57 | Removing the exisiting u/s plastic shoes and provide new 25mm dia hard plastic shoe from bottom of all legs with 20mm screws of table dining 6pers complete all as specified and directed. |
| 58 | Preparation of surface and applying french polishing to table dining 6pers except laminated portion all as directed. |
| 59 | REPAIR TO TABLE DRESSING LADIES. Removing the exisiting unsv/broken drawer of Table dressing ladies and supply and fix new drawers front made of 18mm thick prelaminated MDF board and bottom of drawer with 6mm thick BWR grade plywood duly fixed with aluminium anodised knobs 40mm all as specified and shown on drg. |
| 60 | Removing the exisitng unsv/broken mirror with 6mm thick back plywood of table dressing ladies and supply and fix new mirror of 5mm thick suitable to the exisiting frame alongwith 6mm thick BWR grade plywood back all as specified and shown on drg. |
| 61 | Preparation of old surface and french polishing to table dressing ladies except laminated portion all as directed. |
| 62 | REPAIR TO TABLE DINING 1200 x 900mm. Removing the unsv/damaged top of table dining and supply and fixing new top made up of 18mm thick MDR Board exterior grade both side laminated duly covered with teakwood beading 6mm thick half round all around, complete all as specified. |
| 63 | Removing the unsv/broken legs of table dining and S&F new leg made of 1st class hard wood complete all as specified and as shown on drg (each leg will be measured separetely) |
| 64 | Removing unsv long rails of table dining (each rail will be measured separately) and S&F new long rails made of 1st class handwood complete all as specified and shown on drg. |
| 65 | Removing of unsv 25mm dia hard plastic shoes and provided new 25mm dia hard bottom of all legs with 20mm screws of table dining complete all as specified and directed. |
| 66 | Removing unsv short rails of table dining and S&F new short rail made of 1st class hard wood (Each rail will be measured separately) complete all as specified and shown on drg. |
| 67 | Preparation of old surface and french polishing to table dining except laminated portion complete all as specified & directed. |
| 68 | REPAIR TO TABLE 900 x 600 x 760mm WITH DRAWER. Removal of unsv leg and S&F new leg made of 1st class hard wood for table size as per existing complete all as specified & directed. |
| 69 | Removal of unsv long rail and S&F new long rail made out of 1st class hard wood for table size of all as per drg and complete all as per specified and directed. |
| 70 | Removal of unsv stiffner under the top and S&F new long stiffner made out of 1st class hard wood for table of size all as per drg and complete all as per speciation and directed. |
| 71 | Removal of unsv drawer and S&F new drawer front and sides made out of 12mm thick and prelaminated MDF board. 6mm thick (BWR Gde) plywood at the bottom of drawer with aluminium anodised knob of approvaed quality all as per drg and complete all as per speciation and directed. |
| 72 | Removal of unsv stiffner and S&F new stiffner to accommodate drawer made out of 1st class hard wood for table size of all as per drg and complete all as per speciation and directed. |
| 73 | Removal of unsv top and S&F new top made out of 18mm thick MDF Board exterior grade of both side laminated duly covered with teakwood beading 6mm thick half round all around table with drawer complete all as specified and directed. |
| 74 | Removing unsv hard rubber/PVC rings and S&F new hard rubber/PVC rings shall be fixed to the bottom of all legs with 20mm long screws of table with drawer complete all as directed. |
| 75 | M&L for french polishing of complete table exposed to view except laminated portion complete all as specified and directed. |
| 76 | TABLE BED SIDE STEEL FRAME. Removing the exisiting unsv top and all around pre-laminated board of table bed side & supply & fix 18mm thick pre-laminated MDF Board exterior grade of size 450mm x 450mm with 6mm thick teakwood edging all round & treated with french polishing including welding to repairable frame complete all as shown on drgs. |
| 77 | Preparing the exisiting steel surface welding of frame and apply one coat of black synthetic enamel paint of table bed all as specified and directed. |
| 78 | Removing unsv Telescopic channel and supply and fix new telescopic channel 300mm long in any large or small drawers of table bed side all as specified and directed. |
| 79 | Removing unsv shoes S&F new PVC/Rubber shoes of table bed side completed all as specified and directed. |
| 80 | Removing of unsv handles and S&F new 100mm long 8mm dia chromium plated handle of table bedside complete all as specified and directed. |
| 81 | REPAIR TO CHAIR EASY. Removaing the exisiting unsv/broken rear leg and supplying and fixing 1st class hard wood rear leg complete all as specified and shown on drags (Each leg measured separately). |
| 82 | Removing the exisiting unsv/broken front leg and supplying and fixing 1st class hard wood front leg of chair easy cmplete all as specified and shown on drgs (Each legs measured separately). |
| 83 | Removing the exisitng unsv/broken arms rest and supplying and fixing 1st class hard wood arms rest for chair easy complete all as specified and shown on drgs (each arms rest measured separately). |
| 84 | Removing the exisitng unsv/broken fillet of canning and supplying and fixing 1st class hard wood fillet for canning including drilling holes at 12.5mm CC of chair easy complete all as specified and shown on drgs. |
| 85 | French polish to wooden surface for repaired chairs (old and new surface) complete all as sepecified and directed. |
| 86 | REPAIR TO CHAIR DINING. Removing the exisiting unsv/broken rear leg and supplying and fixing 1st class hard wood rear leg complete all as specified and shown on drgs (Each leg measured separately) |
| 87 | REPAIR TO CHAIR DINING: Removing the exisiting unsv/broken front leg and supplying and fixing 1st class hard wood front leg complete all as specified and shown on drgs (Each leg measured separately). |
| 88 | REPAIR TO CHAIR DINING: Remove the exisitng unsv/broken fillet of canning and supplying and fixing 1st class hard wood fillet for canning including drilling holes at 12.5mm CC complete all as specified and shown on drgs. |
| 89 | REPAIR TO CHAIR DINING : Removal of unsv back rest batten and S&F new back rest batten made out of 1st class hard wood of size as per drg complete all as specified and directed. |
| 90 | French polish to wooden surface for repaired chairs (old and new surface) complete all as sepecified and directed. |
| 91 | REPAIR TO CHAIR WRITING. Removing the exisiting unsv/broken rear leg and supplying and fixing 1st class hard wood rear leg complete all as specified and shown on drgs (Each leg measured separately). |
| 92 | REPAIR TO CHAIR WRITING: Removing the exisiting unsv/broken front leg and supplying and fixing 1st class hard wood front leg complete all as specified and shown on drgs (Each leg measured separately). |
| 93 | REPAIR TO CHAIR WRITING: Remove the exisitng unsv/broken fillet of canning and supplying and fixing 1st class hard wood fillet for canning including drilling holes at 12.5mm CC complete all as specified and shown on drgs. |
| 94 | REPAIR TO CHAIR WRITING: Removing the exisiting unsv/broken arms rest and supplying and fixing 1st class hard wood arms rest complete all as specified and shown on drgs (Each arms rest measured separately). |
| 95 | REPAIR TO CHAIR WRITING : French polish to wooden surface for repaired chairs (old and new surface) complete all as sepecified and shown on drgs. |
| 96 | REPAIR TO CHAIR WOODEN BOTTOM. Removing the exisiting unsv/broken seat ply and supplying and fixing new seat made out of 6mm ply wood commercial face veneer of both sides including drilling holes as per existing complete all as specified and shown on drgs (Complete seat of one chair measured separately) |
| 97 | Material and labour for preparation of wooden surface of chair wooden bottom and polishing and fixing of new PVC shoes as per existing complete all as directed by Engr-in-charge |
| 98 | REPAIR TO CHAIR DINING with CUSHIONED. Removing the exisiting worn out seat cushion and S&F new PU foam seat foam of size 450 x 450 x 75mm thick, density 50-55 kg/cm with 12mm thick plywood BWR grade phenol bonded covered with tapestry cloth for chair dining cushioned complete all as specified and shown on drawing. (Tapestry cloth shall be approved by GE(P) . |
| 99 | Removing the exisiting unsv/broken rear leg and supplying and fixing 1st class hard wood rear leg of chair dining with cushioned complete all as specified and shown on drgs (Each legs measured separately). |
| 100 | Removing the exisiting unsv/broken front leg and supplying and fixing 1st class hard wood front leg of chair dining with cushioned complete all as specified and shown on drgs (Each leg measured separately ). |
| 101 | Preparation of surface and french polishing to wooden surface for repaired chairs and applying two or more coat French polish on new surface and one coat on old surface to match uniform shade complete all as specified and shown on drg. |
| 102 | Removing unsv rubber ring and S&F new PVC Rubber Ring of chair dining Complete all as specified and directed. |
| 103 | REPAIR TO CHAIR SCHOOL WITH HAND BOARD: Taking out of unserviceable Hand board and plastic sheet from chiar and Fix new PVC plastic and hand board made of 19mm particle board and fixing with secew. |
| 104 | REPAIR TO CHAIR SCHOOL WITH HAND BOARD: Removing unsv rubber shoes and S&F new PVC Rubber shoes with steel plate inside completed all as specified and directed.` |
| 105 | REPAIR TO CHAIR SCHOOL WITH HAND BOARD: preparing the exisiting steel surface welding and painting with two coats of black synthetic enamel paint complete all as directed. |
| 106 | REPAIR TO TABLE CENTRE. Removing the exisitng unsv top of table centre and S&F new top made out of 18mm thick prelaminated MDF board exterior grade duly edging with 6mm thick beading including French polishing to wooden surface to match the exisitng surfaces of repaired table centre and apply two coat French polish on new surface and one coat on old surfaces to match uniform shade complete all as specified and shown on drawing. |
| 107 | REPAIR TO TABLE CENTRE.: Remove the unsv long rail and S&F New long rail of teak wood complete all as specified and shown on drg. |
| 108 | REPAIR TO TABLE CENTRE. Remove the unsv legs and supply & fix New legs of teak wood complete all as specified and shown on drg. |
| 109 | REPAIR TO TABLE CENTRE. Removing unsv rubber ring S&F new PVC Rubber Ring Complete all as specified and directed. |
| 110 | REPAIRS TO SOFA SET 5 SEATER SEAT. Replacement of exisiting foam cushions of sofa set 5 seater of size 530x560x100mm thick of 40 density covered with white lining cloth and best quality tapestry cloth of rate not less then Rs 450 per meter shall be provided with nylone zipper at one edge duly covered under the tapestry cloth flap. all as directed and shown on drg. |
| 111 | Removing unsv long rail of front or back side of three seater sofa set and supply and fix new long rail made out of first class Hard Wood of size 1590x100x35mm Duly french polished complete all as specified and as shown on drgs. |
| 112 | Removing unsv short rail of any side of sofa set 5 seater and supply and fix new short rail made out of first class Hard wood of size 525x100x35mm duly french polished complete all as specified and as shown on drgs. |
| 113 | Removing unsv wooden bearer of any side of sofa set 5 seater and supply and fix new wooden bearers made out of first class Hard wood of size 525x40x40mm duly french polished complete all as specified and as shown on drgs. |
| 114 | Removing unsv wooden Arms of any side of sofa set 5 seater and supply and fix new wooden Arms made out of first class Hard wood of size 525x40x40mm duly french polished complete all as specified and as shown on drgs. |
| 115 | M&L for smoothening surface with sand paper of sofa set five seater for repolishing the old polished surface or unpolished surface of sofa with one coat of french polish boath above and below the sofa complete all as specified and directed. |
| 116 | REPAIRS TO SOFA SET 4 SEATER SEAT. Replacement of exisiting foam cushions of sofa set 4 seater of size 530x560x100mm thick of 40 density covered with white lining cloth and best quality tapestry cloth of rate not less then Rs 450 per meter shall be provided with nylone zipper at one edge duly covered under the tapestry cloth flap. all as directed and shown on drg. |
| 117 | Removing unsv long rail of front or back side of three seater sofa set and supply and fix new long rail made out of first class Hard Wood of size 670mm wide and 725 mm deep and 530mm high up to arm. Duly french polished complete all as specified and as shown on drgs. |
| 118 | Removing unsv wooden Arms of any side of sofa set 4 seater and supply and fix new wooden Arms made out of first class Hard wood of size 670mm wide and 725 mm duly french polished complete all as specified and as shown on drgs. |
| 119 | M&L for smoothening surface with sand paper of sofa set four seater for repolishing the old polished surface or unpolished surface of sofa with one coat of french polish boath above and below the sofa complete all as specified and directed. |
| 120 | M&L for smoothening surface with sand paper of sofa set four seater for repolishing the old polished surface with one coat of french polish complete all as specified and directed. |
| 121 | TEAPOY. Removing the exisiting unsv top of teapoye and S&F new top made out of 18mm thick pre laminated MDF board exterior grade duly edging with 6mm thick beading including French polishing to wooden surface to match the exisiting surfaces of repaired teapoy apply one coat French polish on new surfaces and one coat on old surfaces to match uniform shade complete all as specified and shown on drawing. |
| 122 | TEAPOY : S&F New long rail made of 1st class teak wood as per existing size, including french polishing complete all as specified and directed. |
| 123 | TEAPOY : S&F New legs made of 1st class teak wood as per existing size including french polishing complete all as specified and directed. |
| 124 | Hat stand with mirror : Taking out old unsv looking mirror from hat stand with mirror and supply and fix new mirror 5mm thick of approved quality duly fixed with well seasoned beading complete all as specified and as shown on drg. |
| 125 | Taking out old unsv brass peg from hat stand with mirror and supply and fix new brass peg of approved quality duly fixed with screw complete all as specified and all as shown on drg. |
| 126 | Taking out old unsv back side ply from hat stand with mirror and supply and fix new plywood 4mm thick of commercial type and fixed with head less nail, complete all as specified and as shown on drgs. |
| 127 | Taking out old unsv front side teak face ply from hat stand with mirror and supply and fix new teak face plywood 4mm thick of commercial type and fixed with head less nail. Complete all as specified and as shown on drg. |
| 128 | Teaking out old unsv beading from hat stand with mirror and supply and fix new beading made of first class hard wood teak of size 35x6mm all round complete all as specified and as shown on drg. |
| 129 | Material and labour for preparation of wooden surface of hat stand with mirror and polishing of hat stand with mirror upto glossy finished all as directed by Engr-in-Charge. |
| 130 | REPAIR TO TABLE DRESSING GENTS. Taking out carefully old exisiting broken top of table dressing gents and supply and fix new 12mm thick ply wood BWR grade including 1mm thick sunmica pasted on top, colour and shade of sunmica approved by GE, exposed edges shall be 4mm thick wooden beading duly finish, complete all as specified and shown on drg |
| 131 | Taking out carefully old exisiting broken bottom of box of table dressing gents and supply and fix new 18mm thick prelaminated MDF Board Exterior grade, colour as approved by GE (P). Exposed edges shall be 4mm thick wooden beading duly finish complete all as specified and shown on drg. |
| 132 | Taking out carefully old exisiting broken sides/ partition of box of table dressing genst and supply and fix new 18mm thick pre-laminated MDF Board Exterior grade, colour as approved by GE(P). Exposed edges shall be 4mm thick wooden beading duly finish, Complete all as specified and shown on drg. |
| 133 | Taking out unsv mirror from table dressing gents and supply and fix new mirror of size 380x760mmx5.0mm thick. Complete all as specified and shown on drg. |
| 134 | Taking out old unsv back frame from table dressing gents and supply and fix new back frame of sixe 45mmx 40mmx2nd class gard wood mirror frame and 6mm thick commercial ply grade BWR type BB complete all as specified and shown on drg. |
| 135 | Taking out old unsv back ply from table dressing gents and supply and fix new nack ply of size 900mm x 380mm x 12mm thick commercial ply grade BWR type BB complete all as specified and shown on drg. |
| 136 | Taking out old unsv drawer of table dressing gents and supply fix new drawer with chromium plated knob complete all as specified and directed. |
| 137 | Material and labour for preparation of wooden surface of table dressing gents and polishing of table dressing gents upto glossy finished all as directed by Engr-in-Charge. |
| 138 | Peg Table. Taking out unsv top from peg table and supply and fix new top made of prelaminated MDF board exterior grade 18mm thick including all round 4mm thick teak wood beading, complete all as specified and as shown on drg. |
| 139 | Taking out unsv legs from peg table and supply and fix new legs made of 2nd class hard wood complete all as specified and as shown on drg. |
| 140 | Taking out unsv short rail from peg table and supply and fix with new short rail made of 2nd class hard wood complete all as specified and shown on drg. |
| 141 | Taking out unsv shoes from peg table and supply and fix new PVC/Hard rubber shoes complete all as directed by Engr-in-Charge. |
| 142 | Material and labour for preparation of wooden surfaces of peg table and polishing of peg table upto glossy finish all as directed by Engr-in-Charge. |
| 143 | Table 3'x2' with and w/o drawer. Removing the exisiting unsv top of table 3'x2' and S&F new top made out of 18mm thick pre laminated MDF board exterior grade duly edging with 6mm thick beading including French polishing to wooden surface to match the exisiting surfaces of repaired teapoy and apply one coat French polish on new surfaces and one coat on old surfaces to match uniform shade complete all as specified and shown on drawing. |
| 144 | Removal of unsv drawer and S&F new drawer front and sides made out of prelaminated MDF board, 6mm thick (BWR Gde) plywood at the bottom of drawer with aluminium anodised knob of approvaed quality all as per drg and complete all as per speciation and directed. |
| 145 | Table for Hav & OR steel :- Removing the exisiting unsv top of table Hav & OR and S&F new top made out of 18mm thick pre laminated MDF board exterior grade duly edging with 6mm thick beading including French polishing to wooden surface and welding of old surface & apply one coat OG enameld paint complete all as specified and shown on drawing. |
| 146 | REPAIR TO CHAIR COMPUTER W/O ARMS FOR THE FOLLOWING. Removing old u/s fitting/fixing of chair computer w/arms and supply and fixing new items complete all as specified and shown on drawing. |
| 147 | Complete seat 50mm thick synthetic foam of 32 density made fo shape for seat and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality. |
| 148 | Complete back 50mm thick synthetic foam of 32 density made fo shape for back and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality. |
| 149 | PVC Base five star alongwith wheels for chair computer w/o arms complete all as specified and shown on drawings. |
| 150 | Revolving wheels for chair computer w/o arms complete all as specified and shown on drg. |
| 151 | Hydrulic system with assasarry (Air soft) for chair computer w/o arms complete all as specified and shown on drg. |
| 152 | S&F Seat cover for seat and shall be stitched with superior quality tapestry cloth of approved colour texture and quality complete all as specified and shown on drg. |
| 153 | S&F back cover for back and shall be stitched with superior quality tapestry cloth of approved colour texture and quality complete all as specified and shown on drg. |
| 154 | REPARING TO BIN LINEN MULTI PURPOSE. Removing the exisiting unsv/broken shutter of Bin linen multipurpose and supply and fix new shutter made of 18mm thick prelaminated MDF board Exterior Grade one side teak face and another side balanced white with 40mm wide brass coated continious piano hinges including 100mm long dia 8mm chrome plate handle and magnet to stick the doors alongwith teakwood beading 6mm thick all around, complete all as specified and shown in drg. (Each leaf to be measured separately) |
| 155 | Remove the unserviceable/broken back ply of side board and supply and fixing new 6mm thick BWR grade plywood all as specified and shown on drg. |
| 156 | Removing the unsv /broken drawers of side board and supply and fixing new drawers made of front 18mm thick prelaminated MDF board Exterior Grade and bottom of drawer with 6mm thick BWR grade plywood duly fixing of 100mm long 8mm dia chromeplated handles all as specified and shown on drg. |
| 157 | Preparation of surface and French polishing to side board inner and outer except prlaminated portion as directed. |
| 158 | CHAIR COMPUTER. Removing old unsv fitting/fixture from chair computer and supply and fixing new items complete all as specified and shown on drawing and as directed. |
| 159 | Complete seat 50mm thick synthetic foam of 32 density and 480mm wide and deep and 550mm high upto seat from ground level made to shape for seat and shall be stitched with superior quality tapestry cloth of approved colour texture and quality all as directed. |
| 160 | Complete back 50mm thick synthetic foam of 32 density made fo shape for back and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality. |
| 161 | All as per item No 160.00 above but for arms rest complete for chair computer. |
| 162 | All as per item No 160.00 above but for base 5 star alongwith wheels for chair computer. |
| 163 | All as per item No 160.00 above but for hydraulic system with accessory (Air soft) for chair computer. |
| 164 | S&F Seat cover for seat and shall be stitched with superior quality tapestry cloth of approved colour texture and quality. |
| 165 | S&F back cover for back and shall be stitched with superior quality tapestry cloth of approved colour texture and quality. |
| 166 | Repair To Chair Revolving Med Back with following. Removing old u/s fitting/fixture of chair revolving w/arms and supply and fixing new items complete all as specified shown on drawing. |
| 167 | Complete seat 50mm thick synthetic foam of 32 density made to shape for seat and shall be stitched with superior quality tapestry cloth of approved colour texture and quality. |
| 168 | Complete back 50mm thick synthetic foam of 32 density made fo shape for back and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality. |
| 169 | Repair to Chair Revolving Med Back: with Arms rest complete |
| 170 | Repair Chair Revolving Med Back.: with base 5 star alongwith wheels. |
| 171 | Repair to chair Revolving Med Back: with hydraulic system with accessory (Air soft) |
| 172 | S&F Seat cover for seat and shall be stitched with superior quality tapestry cloth of approved colour texture and quality. |
| 173 | S&F back cover for back and shall be stitched with superior quality tapestry cloth of approved colour texture and quality. |
| 174 | Repairs to chair Revolving with high Back (Make-Odessay Model AT-3001) the Following:- Removing old u/s fitting/fixture of chair revolving excutive and supply and fixing new items complete all as specified & directed. |
| 175 | Complete seat 50mm thick synthetic foam of 32 density made of shape for seat and shall be stitched with superior quality tapestry cloth of approved colour texture and quality. |
| 176 | Complete back 50mm thick synthetic foam of 32 density made to shape for back and shall be stitched with superior quality tapestry cloth of approved colour texture and quality. |
| 177 | Arms rest of black integral skin polyurethane reinforced with MS insert chair revolving high back complete all as specified and directed. |
| 178 | Base 5 star alongwith wheels of chair revolving high back complete all as specified and directed. |
| 179 | Hydraulic system with accessory (Air soft) of chair revolving high back complete all as specified and directed. |
| 180 | S&F Seat cover for seat and shall be stitched with superior quality tapestry cloth of approved colour texture and quality. |
| 181 | S&F back cover for back and shall be stitched with superior quality tapestry cloth of approved colour texture and quality. Please Enable Macros to View BoQ information |
